The Warming Power The Heating Control Kit is an intuitive , automatic and cost efgective solution which provides energy effjciency and comfort control . Through our online platform HomeManager you can optimize your energy consumption while controlling your NorthQ devices and other compatible devices . The kit consist of: • Q-Stick It is a small but powerful gateway which connects to an existing Wi-Fi network and controls up to 16 Z-Wave devices . • 2x Danfoss Living Connect These thermostats allow for excellent energy effjciency, manual and remote control. Q-Stick 2x Danfoss Living Connect 3
How It Works Danfoss Living Connect HOME MANAGER Your Device HomeManager Your Router Q-Stick Danfoss Living Connect
Benefjts Smarter Heating System, Lower Heating Bill With the Heating Control Kit you can easily control your heating from distance , make heating schedules and start saving on your bill. Automatic Control The Heating Control Kit allows you to remotely control the temperature and set automatic daily heating and vacation schedules to enhance comfort and save up to 23% on your heating bill . 6 7
Manual Control Manual control overrides the existing preset schedule until the next scheduled event. If you feel too hot or cold you can simply change the temperature set-point manually at the thermostat or from your computer or phone. * If the temperature drops under 16°C the costs for heating will be higher Improve Your Energy Consumption Behavior Having the overview of the heating schedules makes you more aware and motivated to reduce heating expences by lowering the temperature set-point in your home. 8 9
Feel The Heat In Your Home Using Danfoss Living Connect and the HomeManager platform allows you to increase comfort just by one click, even your kid can do it. Automatic Synchronizing Of The Room Temperature When controlled through HomeManager the system automatically synchronizes the temperature set point between the thermostats in the same room and helps you to optimize your energy consumption . 10 11
Open Window Detection Danfoss Living Connect features an open window detection system . This automatically closes the valve if the room temperature falls dramatically . This reduces wasteful heat loss and unnecessary energy costs . • Automatic Valve Exercising To keep the radiator valve functional and at its best, Danfoss Living Connect automatically exercises the valve once per week by opening it fully and then returning it to its normal setting. 12 13
Accurate Temperature Control The built-in sensors allow it to measure and control the actual room temperature very accurately. Frost Protection The system doesn’t go lower than 5°C in order to avoid burst pipes during the winter. 14 15
Works on Every Device, Everywhere The Heating Control Kit is designed to work on Android , iOS and Windows devices. Plug & Play Installation With the easy to follow instructions, the Heating Control Kit takes approximately 10 minutes to install, without the need of a certified technician. 16 17
Offmine Control Q-Stick will continue to manage the connected Z-wave devices according to the set schedule even if there is no internet connection . Expandable & Customizable The Heating Control Kit can easily be used with all NorthQ products like Q-Gas, Q-Plug + + ... and other compatible 3 rd party Z-wave devices . 18 19
Technical Specifjcations • Danfoss Living Connect is compatible with most radiator valves. • Danfoss Living Connect has 24 months average battery lifetime. • Q-Stick supports up to 16 Z-Wave devices . • Supports wide range of 3 rd party Z-Wave certifjed devices . 21
Recommend
More recommend
