Revolutionary New Cutting System exclusively offered by Eliminate Foreign Material in Your Grind
S5000 Cutting System German Engineered by von der Weiden Also available in S2000
Introducing Revolutionary New Cutting Head Eliminating Foreign Material ➢ Quality is programmable to meet or exceed your customers standards ➢ Cutting system with no knives or discs ➢ No metal abrasion with almost no wear ➢ Rejection of foreign objects such as cartilages, residual bones, sinews and rinds, plastics, and other foreign objects ➢ Depending on the hole size, an output of up to 100% can be achieved ➢ Product temperature increases maximum of 1- 3ᵒC (1.8 - 5.4ᵒF)
S5000 Specifications ➢ Enclosure is constructed of 304 stainless steel designed to be used in a wash down area on the production floor. ➢ Product output of 5 tons per hour ➢ Requires 3 phase 480v/125A power and 100psi air. ➢ IP67 HMI ➢ Tooling can be used for up to 100,000 tons and requires a grinding service after 20,000 tons ➢ Also available - S2000 model with a 2 ton/hour output
Digital HMI for Ease of Operation Digital controls for ease of operation ➢ Permanent logging of current: upon request temperature logging with direct internet access to visualize the information on your computer ➢ Reduction of service costs by direct remote access on the computer ➢ Program parameters can be adjusted per customer quality ➢ Complete operation through the control panel. Exceptions: ON/OFF, Reset and Emergency Stop ➢ Automatic dry-run protection in case the meat supply has stopped
Video Demonstrations
Video Demonstrations
Contact Information Viewtech Systems of America also offers Package Inspection Systems, Foreign Material Inspection Systems, Roll Stock Package Inspection Systems, and Cheese Block/Chub Inspection Systems. For more information visit our website at www.viewtechsystems.com and contact Jeff Youngs at jyoungs@viewtechsystems.com to discuss your application.
Recommend
More recommend
