Office 1 1 742,40 m 2 «ORGHIMproject» Design Institute Office 2 2 621 m 2
Corporative Structure of Private Joint-Stock Company Severodonetsky ORGHIM
About the Institute ORGHIMproject Design Institute (DI ORGHIMproject) was established in 2009 based on Special Design Bureau (was established in 2004). Activities of the Institute include practically all system design fields, in particular: Chemical industry • Oil refining and gas processing • Oil and gas field development • Petrochemical industry • Hydrocarbons storage and trans- • shipment terminals Power generating industry • Environment and infrastructure • protection
Types of activities Activities of production departments: Activities of auxiliary departments: - Technical and economic assessment; - Technical and economic calculations; - Hardware and software providing; - Feasibility studies; - Providing with standards and norms; - Business plan; - Development of 3D design data base; - Projects (design documentation for foreign Customers); - Work planning; - Basic and detail design adaptation to the Customer country - Marketing and PR; standards; - Project issuing - General design engineering; - Preparation of design assignment and technical attachments thereto; - Preparation of technical requirements for Customer tenders; - Detailed design engineering; - As-built documents; - Cost estimate documents; - Equipment manufacturing supervision; - Equipment acceptance; - Construction supervision; - Project supporting during expert examination; - Service Package for construction management; - Project adaptation to infrastructure of the Customer production site; - Survey and inspection of production facilities; - Project implementation risk assessment; - Development of recommendations and procedures; - Other.
Organizational chart of ORGHIMproject Design Institute
Personnel of ORGHIMproject Design Institute Administration Project managers Process department No. 1 Process department No. 2 Process department No. 3 Process department No. 4 Instrumentation department Electrical department Water supply and sewage department HVAC and dust cleaning department Civil department No. 1 Civil department No. 2 Cost estimation department Heat insulation group Engineering documentation development group Group for low-voltage electric devices Interconnections group Plot plan group Environment protection group Technical department Marketing and PR department Archives Planning department Translation group Equipment purchasing group Group for computer-aided design 0 5 10 15 20 25 30 35 40 45 Total Number of the Design Institute employees – 289 persons Average age of the employees – 46 years old
Authorization documents Russian Federation Republic of Kazakhstan Ukraine Republic of Belarus Republic of Uzbekistan
Quality management system
Software Item No SOFTWARE description SOFTWARE assignment 1 2 3 1. Graphics – 2D, 3D, Visualization 1.1 «AutoCAD» Graphic editor 1.2 «VetCAD» AutoCad utility set is targeted at the engineers that are involved into industrial and civil building design «Autodesk Building Design Suite 1.3 Software complex for 3D design, modeling visualization Premium 2020 Russian» 1.4 «Bentley AutoPLANT 3D» 3D design system for pipelines, equipment, steel structures 2. Calculating Software 2.1 «Pro/II» Comprehensive process simulation Calculate and select types of direct action safety valves (and safety valve manifolds equipped with switching devices) 2.2 «Prevalve» which are installed on vessels, tanks and in process pipelines To perform thermal and hydraulic calculations as well as to select diameters of the pipelines which are used to pump 2.3 «Hydrosystem» liquid or gaseous products and gas-liquid mixtures Optimum choice of heat insulating structures and materials, calculation of minimum required heat insulating layer, 2.4 «Isolation» selection of product size, estimation of work scope and total amount of materials, design documentation release «Autodesk Robot Structural Analysis 2.5 Software package for structural calculation and engineering Professional 2020» 2.6 «FOK COMPLEKS» Software system engineering of isolated foundations for frame building and facilities columns as well as strip foundations Software system for calculation of media flow rate according to GOST8.586.(1, 2, 3, 4, 5) – 2005, to ISO 5167 (1, 2, 2.7 «Flowmeter ISO» 3:2003) and AGA-3 REPORT No 3 (for natural gas) as well as for flow rate calculation by means of special flow restrictors under Regulatory document 50-411-83 2.8 «ProTreat» Tools for virtual reality modeling and calculation of facilities in the gas purification industry Program for hydraulic ducts calculation. It is provided for computer calculation of ventilation and mechanical forced 2.9 «GidrV» aspiration systems as well as for free ventilation systems
Software (continued) Item No Software description Software assignment 1 2 3 2.10 «Start Prof» Pipe strength calculation 2.11 «Passat» Stability and strength design of tanks, vessels and their elements 2.12 «Dym» Calculation of smoke forced and exhaust ventilation systems «Poto к» 2.13 Heating system engineering 2.14 «VSV» Ventilation system calculation 2.15 «RTI» Calculation of building heat loss 2.16 «KALOR» Calculation of calorific installations 2.17 «Fire SAFETY» Explosion and fire safety design and reference system 2.18 «Toksy+ RISK» Software system to estimate the accident consequences involving emission release and risk values Air pollution estimates (Unified Program of air pollution estimation ). It implements the provision « Analysis of air pollutant 2.19 PK «Ecolog» concentration found in the industrial emissions (General reference documentation - 86). State Committee for Hydrometeorology 2.20 «Ecolog Noise» Noise impact assessment on environment and evaluation of noise exposure outgoing from area sources at any point 2.21 «Mining works» Program for hazardous emission calculation for the equipment used in the open pit mining «А TP-ECOLOG» 2.22 Program for emission amount released by fleet vehicles and vehicles production plants 2.23 «VANISH PAINT» Program is designed to calculate emission release while applying vanish paint materials 2.24 «WELDING» Provided for calculation of emission release during welding 2.25 «Hazard class calculation» Calculation of waste hazard class for the environment according to “Criteria” 2.26 «MPE-ECOLOG» Program for development and formation of maximum permissible emission draft standard matrix 2.27 «WASTES» Program for preparation of standard drafts for waste production and limits
Software (continued) Item No. Software deswcription Software assignment 1 2 3 2.28 «ERA» Air emission calculation (according to the Norms of the Republic of Kazakhstan) 2.29 «LIRA» Software system for automated civil structure engineering Electronic international steel grade translator which is provided for prompt and easy search of analogue of foreign steel 2.30 «WinSteel 7 Prof» type 3. Searching Systems of Regulatory Documents 3.1 «NormaCS» Information and reference searching system of RF regulatory documents 3.2 «IS PARAGRAPH» Information and reference searching system of Kazakhstan regulatory documents (Codes and Specifications ) 3.3 «Stroi-Inform PRO» Information and reference searching system of Ukrainian regulatory documents 4. Diary and Network Scheduling «Primavera P6 Enterprise Project 4.1 Project management Portfolio Management» 5. Cost Estimating Software 5.1 «IBK» Program for computer cost assessment of new construction, debottlenecking, modernization and retrofitting Software system for cost estimating and checking as well as for creating report of completed works according to various 5.2 «Grand-Smeta» (Russia) certificate forms, making up of estimate documents in full range to estimate the construction cost 5.3 «PIR System» (Russia) Computer system to estimate design and survey work cost «АВС 4» (Russia, Kazakhstan) 5.4 To develop estimate and life documentation by all members of investment process Besides Specialists perform some works connected with software PDMS AVEVA and Tekla Structures
COMPLETED PROJECTS OF NOTE (SINCE 2014)
AMMONIA/METHANOL/UREA COMPLEX, UNIT FOR RAW (RIVER) WATER TRATMENT PRODUCTION CAPACITY: 1,200 m 3 /hr. Client : Ammoni OJSC (Kazan, Russian Federation) Phase : Design (Stage P) & Detailed Design Year of completion: 2014
COMPLEX FOR VGO HIGH CONVERSION AT KHABAROVSK OIL REFINERY Client : Technicas Reunidas (Madrid, Spain ) Phase : Detailed documents (adaptation to existing Russian Federation norms and regulations) Year of completion: 2014
SECOND TRAIN OF LOW-TONNAGE UNIT (MTU) FOR MOTOR FUELS OF EURO-5 EMISSION STANDARD Client : Condensate JSC (Aksay, Republic of Kazakhstan) Phase : Design & Detailed documents Year of completion: 2015
M-3 UREA PLANT. TECHNICAL REVAMP TO INCREASE CAPACITY UP TO 1,600 T/DAY AT PrJSC SEVERODONETSK AZOT ASSOCIATION Client : Casale SA (Lugano, Switzerland) Phase : Design & Detailed documents Year of completion: 2015
Recommend
More recommend
