Design of a Magnetic Mapping System for Mu2e Charles Orozco 4 - - PowerPoint PPT Presentation
Design of a Magnetic Mapping System for Mu2e Charles Orozco 4 - - PowerPoint PPT Presentation
Design of a Magnetic Mapping System for Mu2e Charles Orozco 4 August 2014 Introduction Mu2e and Project Requirements Conversion of muons to electrons Three Solenoids Production Solenoid
SLIDE 1
SLIDE 2
- Conversion of muons to
electrons
- Three Solenoids
– Production Solenoid – Transport Solenoid – Detector Solenoid
- An accurate magnetic field
map is required
- The DS is 10 meters long
- Magnetic field gradients
- Material Constraints
– No magnetic materials – Minimal use of metal
- Accuracy Constraints
– All positions to within 50
Introduction – Mu2e and Project Requirements
8/13/14 Presenter | Presentation Title 2
SLIDE 3
- Preliminary designs for
the DS mapping system
– Z Drive – Phi Drive – Leveling System
Summer 2013
8/13/14 Charles Orozco | DS Magnetic Mapping System 3
SLIDE 4
- Major revisions to the
preliminary design
- Worked with suppliers
to find the necessary parts
- Created a preliminary
cost estimate of the system
- Migrating the design
files to Teamcenter
Summer 2014
8/13/14 Charles Orozco | DS Magnetic Mapping System 4
SLIDE 5
- Air powered stepper
motor
- Two linear actuators
- One rotary actuator
Z Drive
8/13/14 Charles Orozco | DS Magnetic Mapping System 5
SLIDE 6
- Three axis linear
adjustments using 1/40” pitch lead screws
- Minute rotational
adjustments using the play in the lead screws
- 360°continuous
rotation
Phi Drive
8/13/14 Charles Orozco | DS Magnetic Mapping System 6
SLIDE 7
- Fiberglass panels
- Fiberglass square
tubing
- Foam core
- Stainless steel wheel
hub
– Manufactured in house
Propellers
8/13/14 Charles Orozco | DS Magnetic Mapping System 7
SLIDE 8
- The posterior wheel
hub directly connects to the wheel hub on the front main propeller to ensure proper alignment.
- The small propeller
extends in to the TS collimator region. Propeller Extension
8/13/14 Charles Orozco | DS Magnetic Mapping System 8
SLIDE 9
- Estimate cost of
manufacturing
- Finalize the bill of materials
- Perform Finite Element
Analyses to test the design
- Finalize the designs and
have the drafting department create drawings
Future Work
8/13/14 Presenter | Presentation Title 9
SLIDE 10
- Marc Buehler
- Vladimir Kashikhin
- Matt Kramp
- Tom Page
- Cosmore Sylvester
- Mike Tartaglia
- John Tompkins
- George Velev
- Mayling Wong-Squires
- Jerry Zimmerman
- Elliott McCrory
- Dianne Engram
- Linda Diepholz
- Jamieson Olsen
Acknowledgements
8/13/14 Presenter | Presentation Title 10
SLIDE 11