cp11
play

CP11 Single Phase Power Calibrator and Tester of Power Engineering - PowerPoint PPT Presentation

CP11 Single Phase Power Calibrator and Tester of Power Engineering Devices www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukucza 18 Street 1 Standard accesories Calibration certificate, Calpro 300 Basic software operation manual,


  1. CP11 Single Phase Power Calibrator and Tester of Power Engineering Devices www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 1

  2. Standard accesories Calibration certificate, Calpro 300 Basic software operation manual, guarantee www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 2

  3. Standard accesories USB mini / USB A interface Power cord cable www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 3

  4. Standard accesories Set of safety current cables up Set of safety voltage cables to 20A www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 4

  5. Standard accesories Set of accessories for safety AD300 sockets adapter cables www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 5

  6. Standard accesories C091A T3475-001 plug Fuse type T2A, 250V, 5x20 Amphenol www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 6

  7. Optional accesories C300LabView – Calpro 300TS – Calpro 300PQ – LabView Driver test system power quality for CP11 software software Calibrator www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 7

  8. Optional accesories Laptop PC with Calpro 300 MPX8 – eight channel meter Basic software error calculator with Mpx8 software www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 8

  9. Optional accesories EA11 – current cables up to 120A with set of replaceable ET11 – transportation case terminals www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 9

  10. Optional accesories CF100 – miniature photo head CF101 – miniature photo head for meters with LED for inductive meters www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 10

  11. Optional accesories UCF100 – holder for CF100 CF102 – photo head with and CF101 photo heads holder for inductive meter and meter with LED www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 11

  12. Optional accesories ZW100/10A – coil 100 turns / ZW10/20A – coil 10 turns / 10A with a stand 20A with a stand www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 12

  13. Optional accesories Quick connector Quick connector EH20 ER20 / EH20 – rack with quick connection device Assembly stand ER20 www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 13

  14. Calpro 300 software installation www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 14

  15. Calpro 300 software installation www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 15

  16. Front panel overview www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 16

  17. Electricity meter testing – hardware connection STEP 1 Place the CP11 calibrator on a stable surface, with sufficient ventilation. Connect the calibrator, using the Power cord, to mains power, which meets: � voltage within 90...264V � frequency within 47...63Hz � at least 300VA power available www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 17

  18. Electricity meter testing – hardware connection STEP 2 Place the ER20 rack for hanging of meter with EH20 quick connection device, on the calibrator. www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 18

  19. Electricity meter testing – hardware connection STEP 3 Mount the electricity meter on the rack and secure it with the green lever. www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 19

  20. Electricity meter testing – hardware connection STEP 4 Connect the current input of the electricity meter to the current output of the calibrator, using: � in case of currents up to 20A - safety current cables � in case of currents up to 120A – EA11 cables www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 20

  21. Electricity meter testing – hardware connection STEP 4 Connect the voltage input of the electricity meter to the voltage output of the calibrator, using the safety voltage cables. www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 21

  22. Electricity meter testing – hardware connection STEP 5 Place the CF102 photo head holder on the meter and align it in the vertical axis so, that the electricity meter rotor is visible exactly in the middle of the gap. www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 22

  23. Electricity meter testing – hardware connection STEP 6 Place the CF102 photo head in the holder and align it in the horizontal axis so, that the photo head is positioned directly atop the rotor. Connect the photo head to the impulse imput of the calibrator. www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 23

  24. Electricity meter testing – hardware connection STEP 7 Connect the calibrator to the PC, using the USB mini / USB A interface cable (via USB interface socket on the calibrator). After that, the test system is fully connected and ready for operation. www.calmet.com.pl Poland, 65-472 Zielona Gora, Kukułcza 18 Street 24

Download Presentation
Download Policy: The content available on the website is offered to you 'AS IS' for your personal information and use only. It cannot be commercialized, licensed, or distributed on other websites without prior consent from the author. To download a presentation, simply click this link. If you encounter any difficulties during the download process, it's possible that the publisher has removed the file from their server.

Recommend


More recommend