KM-Project Company «We offer system solution of Medical Institutions’ problems in collection, DISPOSABLE SHARP CONTAINERS storage and disposal of medical wastes through implementation of innovative technology and progressive methods of medical wastes treatment that works in complex with information about correct disposal of materials that may bring potential threat to Public Health!»
Our aim is We offer complex arrangements to help our clients solving medical wastes problems. To maintain environmental balance by implementing safe and progressive technology of wastes recycling. To manufacture safe products of a nigh quality for medical wastes. BottoM
Company’s strengths are: Client directivity Cohesive stable team of professionals. Versatility of production conditional on wide range of sizes and capacities of manufactured goods. Proximity to our clients. We have 4 stocks with all range of products available at any time in any quantity. All the production meets the case of safety and registered as medical devices in Russian Federation. Our company certificated according to requirements of standards ISO 9001: 2008 and ISO 13485:2003 Cooperation of KM-Project Company with our partners is the most important non-material resource directed to solving problems of medical wastes treatment.
MEDICAL WASTES CONTAINERS Semiautomatic lid
MEDICAL WASTES CONTAINERS Medical wastes containers manufactured by KM-Project Company are to be used in any structure subdivision of hospitals and other Patient Care Institutions. Disposable Sharp container s are equipped with special leak proof lid removal of syringe with stopper identifying re-open of container for contactless needle removing. Containers of capacity of more than 0,5 L are equipped by fixing device that allow you to use containers by one hand . We produce containers of the following capacity: 0,25 ; 0,5; 1; 1,3; 1.5; 3; 5; 6 Liters. Disposable containers for organical, biological, microbiological (clinical) wastes are intended for collection of medical waste that are irrevocable for collection in soft packing . Containers are equipped by fixing device that allow you to use container s by one hand . We produce containers of the following capacity: 3; 6 Liters.
MEDICAL WASTES CONTAINERS Reusable bins for medical waste. Bins are to be used for collection, storage and transportation of medical wastes. Sharp containers and containers for clinical wastes are to provide sealing in process of wastes collection and to make impossible unsealing during transportation of medical wastes outside of medical department. In case of correct use the risk of spread of infections transmitted through blood such as Hepatitis, Syphilis, HIV is completely reduces.
DISPOSABLE SHARP CONTAINERS Safe Disposable Sharp Container EK-01-KM-Project with button fix lid. Capacity 0,25 L Container is intended for contactless gathering of syringe needles, sharp instruments and other hazardous medical waste in operating conditions of emergency, home-nursing, doctors of private medical practice. May be applied in any health care institution. Marking label may be produced according to your requirements. Height – 120 mm Length – 125 mm Width - 91 mm
DISPOSABLE SHARP CONTAINERS Safe Disposable Sharp Container EK-01-KM-Project with lid and stopper identifying re-open of container. Capacity 1 L. Container is intended for contactless gathering of syringe needles, sharp instruments and other hazardousmedical wastes in operating conditions of emergency, home-nursing, doctors of private medical practice. May be applied in any health care institution. Marking label may be produced according to your requirements. Containers of 1 and 5 L. capacity implemented with fixing device for one-hand use. Height – 125 mm Top diameter – 115 mm Bottom diameter – 99 mm
DISPOSABLE SHARP CONTAINERS Safe Disposable Sharp Container EK-01-KM-Project with lid and stopper identifying re-open of container. Capacity 0,5 L. Container is intended for contactless gathering of syringe needles, sharp instruments and other hazardousmedical wastes in operating conditions of emergency, home-nursing, doctors of private medical practice. May be applied in any health care institution. Marking label may be produced according to your requirements. Containers of 1 and 5 L. capacity implemented with fixing device for one-hand use. Height – 92 mm Top diameter – 99 mm Bottom diameter –74 mm
DISPOSABLE SHARP CONTAINERS Safe Disposable Sharp Container EK-01-KM-Project with frame covering slots for contactless needle removing and with fixing stopper excluding re-open of container. Capacity 1,3 L Container is intended for contactless gathering of syringe needles, sharp instruments and other hazardous medical waste in operating conditions of emergency, home-nursing, doctors of private medical practice. May be applied in any Health care institution. Marking label may be produced according to your requirements Height – 140 mm Length – 110 mm Width - 95 mm
DISPOSABLE SHARP CONTAINERS Safe Disposable Sharp Container EK-01-KM-Project with lid and stopper identifying re-open of container. Capacity 1,5 L. Container is intended for contactless gathering of syringe needles, sharp instruments and other hazardous medical wastes in operating conditions of emergency, home- nursing, doctors of private medical practice. May be ap- plied in any health care institution. Marking label may be produced according to your requirements. Containers implemented with fixing device for one-hand use. Height – 172 mm Top diameter – 129 mm Bottom diameter- 103,5 mm
DISPOSABLE SHARP CONTAINERS Safe Disposable Sharp Container EK-01-KM-Project with lid and stopper identifying re-open of container. Capacity 3,0 L. Container is intended for contactless gathering of syringe needles, sharp instruments and other hazardous medical wastes in operating conditions of emergency, home- nursing, doctors of private medical practice. May be ap- plied in any health care institution. Marking label may be produced according to your requirements. Containers implemented with fixing device for one-hand use. Height – 198 mm Top diameter – 163 mm Bottom diameter- 130 mm
DISPOSABLE SHARP CONTAINERS Safe Disposable Sharp Container EK-01-KM-Project with lid and stopper identifying re-open of container. Capacity 6,0 L. Container is intended for contactless gathering of syringe needles, sharp instruments and other hazardous medical wastes in operating conditions of emergency, home- nursing, doctors of private medical practice. May be ap- plied in any health care institution. Marking label may be produced according to your requirements. Containers implemented with fixing device for one-hand use. Height – 250 mm Top diameter – 200 mm Bottom diameter- 160 mm
CONTAINERS FOR ORGANICAL, BIOLOGICAL, MICROBIOLOGICAL WASTES Container is to be used in laboratories, manipulation rooms, treatment rooms. Container made of plastic is intended for collection of medical waste that are irrevocable for collection in soft packing.
CONTAINERS FOR ORGANICAL, BIOLOGICAL, MICROBIOLOGICAL WASTES Containers are to provide sealing in process of wastes collection and to make impossible unsealing during transportation of medical wastes outside of medical department. Volume of containers is following; 3 l.; 6 l. We may produce containers with marking according to Customers’ State Requirements. Color -coded lids according to your State regulations for Medical wastes
Bin BM-02-KM-Project with fixing lid Bin is to be used for collection, storage and transportation of medical wastes. Bins are manufacturing in different colors in compliance with classification of medical wastes. Medical wastes bag of proper color and size is to be places inside of a bin before collection of medical wastes. Volume of bin is 35 l. 35 l - 700x800 mm. (bag) We may produce bins with marking according to Customers’ State Requirements . Color-coded lids according to your State regulations for Medical wastes
HAND-CART FOR TRANSPORTATION OF MEDICAL WASTES Hand-cart is to be used for transportation of dustbins with medical wastes. Hand-cart is made of steel shape, iron bar, plastic and rubber. Hand-cart has 3 wheels (Diameter of 2 driver wheels is 200 mm.; diameter of auxiliary wheel is 50 mm) Weight is 12 kg. The frame-work of a cart is dabed. The paint is proof against split, damage and disinfection. Size of a cart is 60x50x95 cm.
HAND-CART FOR TRANSPORTATION OF MEDICAL WASTES Hand-cart is to be used for transportation of bins and bags with medical wastes. Hand-cart is made of steel shape, iron bar, plastic and rubber. Hand-cart has 2 wheels (Diameter of 2 driver wheels is 200 mm.) Weight is 12 kg. The frame-work of a cart is dabed. The paint is proof against split, damage and disinfection. Size of a cart is 60x50x90 cm.
DiplomaS & sertificateS
KM-Project Company Russian Federation, Republic of Tatarstan, Кazan, Moskovskaya str. 15, post code 420095, mail box 52 E-mail: km-proekt@dez.ru Web: www.dez.ru Phone number/ Fax: (843) 227-53-20, 227-53-21, 227-53-22, 227-53-23
Thank you for your attention
Recommend
More recommend
