industry. The company developed throughout the region and was - - PowerPoint PPT Presentation



BAYSHIELD International FZC was first established in 2003 in Ras El Khaymah Free Zone, UAE, having the will and capacity to manufacture a full range of construction chemical products, serving the growing market in the construction industry.



The company developed throughout the region and was recognized throughout the UAE market as major producer for Bituminous products, in the field of waterproofing, Mortars, adhesive, coating and sealer, in addition to a wide range

• f Finishing products ranging from Polyurethane to Epoxy products covering the

construction field requirements and needs.



Following LEED and ESTIDAMA requirements, BAYSHIELD manufactures its products using Recycled raw material from highly certified and recognized supplier in the region, allowing for Low and zero VOC contents in addition to the latest Nano

• technology. BAYSHIELD quality management system has been in accordance with

ISO 9001-2000 quality procedures.



A team of chemists work together in research and development to customize the products under tropical conditions. BAYSHIELD has qualified and experienced technical Personnel who work closely with consultants and contractors assisting in the selection of products and providing full technical advice and service.

When Quality and Delivery meet pricing and commitment, this is what we excel at…

To become a pioneer in the industry for the latest technologies, Solution providing and well- experienced personnel.

Green Chemical Construction Division

• 1. Concrete admixtures
• 2. Concrete Repair
• 3. Flooring Finishes & Systems
• 4. Protective Coating
• 5. Sealants
• 6. Waterproofing Ranger
• 7. Bitumen Primer

Adhesive & Grout

• Adhesives:
• 1. Cementitious polymer modified
• 2. Three component epoxy tile adhesive
• Grouts:
• 1. High performance Cementitious colored tile grout
• 2. High performance solvent free epoxy grout for

bedding and grouting tiles

Material presented comply with ESTIDAMA Requirement and pearl rating system Version 2.0 April 2011

Concrete Admixture Products

• 1. Superplasticizser liquid admixture
• 2. Water reducing liquid admixtures
• 3. Powder form waterproofing admixtures
• 4. Liquid based Calcium chloride based Accelerator
• 5. Liquid calcium nitrite inhibitor

Material presented comply with ESTIDAMA Requirement and pearl rating system Version 2.0 April 2011

Concrete Repair Items

• 1. Cementitious Based for 4mm built up thickness
• 2. Non-shrinkage high strength modified Cementitious thixotropic mortar
• 3. Modified Non-shrinkage Micro Concrete for pile head re-profiling
• 4. Two Components fast curing Epoxy Mortar
• 5. Three Components Epoxy Floor SCREED up to 10 mm thickness
• 6. Low Exothermic Three component high flowable epoxy grout for

large gaps “300mm”

Material presented comply with ESTIDAMA Requirement and pearl rating system Version 2.0 April 2011

Flooring System & Finishes

• 1. Underlay Self leveling cementitious screed up to 10 mm
• 2. Polymer & Fiber Reinforced screed flooring for Heavy duty uses
• 3. Dry Shake Hardeners for Multi-uses.
• 4. Acrylic Sealants & dust proof hardeners
• 5. Solvent based Epoxy Systems
• 6. Solvent free Epoxy System
• 7. Solvent Free Epoxy Self Leveling
• 8. Polyurethane Traffic Deck Coating

Material presented comply with ESTIDAMA Requirement and pearl rating system Version 2.0 April 2011

Sealants

• 1. UV, Abrasion & Chemical resistant non-

shrinkage highly elastic Polysulphide Joint sealant For Vertical & Horizontal uses

• 2. Single component Bitumen Base Mastic

Sealant

Material presented comply with ESTIDAMA Requirement and pearl rating system Version 2.0 April 2011

Waterproofing Range

• 1. Certified Non-toxic two component solvent free epoxy polysulphide

elastomeric coating

• 2. One component extended polyurethane pitch & Pitch free with high

tensile strength & elongation

• 3. Cold applied, highly rubberized , polymer modified liquid with

emulsified bitumen

• 4. Two Component cementitious waterproofing Elastomeric & Flexible
• 5. Certified cementitious waterproofing for Potable water
• 6. Single component SBS modified Liquid Membrane
• 7. Single component Acrylic Modified Elastomeric Roof Coating

Material presented comply with ESTIDAMA Requirement and pearl rating system Version 2.0 April 2011

Bitumen Primer

• 1. Solvent Base and Water Base Bitumen Primer

complying with ASTM D 41

• 2. Solvent Base Bitumen Primer with High

Viscosity comply with EU standards

Material presented comply with ESTIDAMA Requirement and pearl rating system Version 2.0 April 2011

Domestic Clients MEA Clients

Fibrex Engineering Technical Scope - Lebanon Al Jaber Building TechnoBuilding - Lebanon Protect Middle east TechnoProof – Lebanon Technical Scope LLC Build Earth – Lebanon Al Mutatawir Al Misnad son trading - Qatar Water Seal Dubai Adhesive Ridge Engineering Al Inas Waterproofing Advanced Insulation Al Nahda Gen Con Shams Al Bawadi “SAB”

Bayshield International FZC P.O Box: 50069, Ras Al Khaymah, UAE Tel: +971 7 2660064 Fax: +971 7 2660096 E-mail: info@Bayshield.co Email: sales@bayshield.co