43 PMM 05 - - PDF document

43

Material Table Bodies Stainless steel 1.4034, hardness 54-57 Hrc. Features and Specification 3 Sizes. Ball cage is made of brass. Can be mounted in horizontal and vertical direction (special designed U-shaped cage eliminates creeping of the cage and is limited by using inside screws). Slide-top and center rail have equal lengths. Mounting surfaces are fine machined by precision grin- ding. All the flanks of the slide are ground parallel to the guideways and can serve as Reference Faces. The slide-top and center rail are provided with tapped attachment holes, drilled to a standard configuration. Running accuracies are shown on page 46. Options Selected slides can be supplied with an height tolerance of ±0.01 mm. High vacuum modification available. Notes by ordering By ordering please specify the following:

• 1. Model no. and quantity.

Example: 1 piece slide type PMM 2-30. The PMM slides are leading the trend of reduction in size and weight. This compact model is showing a consistent high running motion accuracy without clearance by an unsurpassed reliability. Thanks to the innovating design combined with a fine adjust- ment (pre-loading is by selection on ball diameter), these slides are showing an extreme low friction resistance, smooth running qualities and long operation lifetime.

Frictionless Miniature Slides PMM

44

Travel Type A B C D H B1 C1 C2 f g h PMM 05-10 10 5 2.5 1 x 5 PMM 05-15 15 7 4 1 10 4 2.1 3.6 3.5 1 x 8

• PMM 05-20

20 15 4 1 x 12 PMM 05-25 25 20 4.5 1 x 16 PMM 1-15 15 5 3.5 1 x 8 PMM 1-20 20 10 4 1 x 12 PMM 1-25 25 15 4.5 1 x 16 PMM 1-30 30 10 6 1.5 20 5 3 5.5 5 1 x 20 4 PMM 1-35 35 25 5.5 1 x 24 PMM 1-40 40 30 6 1 x 28 PMM 1-45 45 35 6.5 1 x 32 PMM 1-50 50 40 7 1 x 36 PMM 2-30 30 20 5 1 x 20 PMM 2-40 40 30 6 1 x 28 PMM 2-50 50 15 8 2.5 40 8 4.5 7.5 7 1 x 36 7 PMM 2-60 60 50 7.5 3 x 15 PMM 2-70 70 60 8 3 x 18 PMM 2-80 80 70 10 3 x 20 mm

• PMM 05

45

C Weight Md Ml Mr m x y in N in g in Ncm in Ncm in Ncm Fig. 23 2 4.5 1.5 3.2 1 M1.6 4.4 2.75 27 3 5.4 2.2 3.8 1 36 4 7.2 3.4 5 1 45 5 9 4.7 6.3 1 60 5 15 9 15.5 2 75 7 18.7 11 19.5 2 75 10 18.7 11 19.5 2 M2 5.7 4.25 90 12 22.5 16 23.7 2 105 14 26.2 19 28.1 2 120 17 30 22.5 32.4 2 135 19 33.8 27 36.8 2 150 21 37.5 31.5 41.3 2 195 28 78 40 69.8 2 234 36 95 50 83.6 2 M2.5 8.8 5.5 273 45 109.2 62.5 98.7 2 312 54 124.8 80 113.5 2 390 64 156 109.2 143.8 2 429 73 171.6 125 159.1 2

• PMM 1 and -2