The Ring Peel Induction Seal Liners. Presented by Eric Warburton - PowerPoint PPT Presentation

The Ring Peel Induction Seal Liners. Presented by Eric Warburton

Topics • Designs available. • Printing options. • Processing & Sealing methods. • Closure design. • Features & Benefits. • Target markets. • Manufacturing plant. • Manufacturing Qualifications. • Advertorial.

Ring Peel Designs

Increased Printing area for Logo or message.

Printing with punch Registration mark and Directional arrow.

Processing & Sealing. Pre-cut discs (currently only available bulk packed). Roll form with printed registration marks for punching. Conventional induction method with liner inside closures. Direct induction with liner punched from tape.

Closure Designs Design not functional with a flat or concaved top. Recommended design, internal recess or convex top.

Ring Peel Video • We have a low quality video to enable email transmission embedded in our website, please contact our office should you require a higher quality version.

Features & Benefits • Processing • Customer / End User • • Single piece structure Safety & Convenience • • No need for separate reseal Tamper evident element • Easy removal • Supplied in Disc or Roll form • Easy access of contents • No glue required • Leaves a foam ring welded to the • Structure available for Retort or rim of the container for resealing Hot fill applications • Reseal pack with cap if contents are not single use • Added value • Brand awareness

Target Markets • Convenience foods, snacks. • Single serve foods. • Dry contents - coffee, spices, tablets. • Liquids – drinks, medicines, chemicals, oils. • Foods – spreads, hot fill, pasteurisation, retort. • Cosmetics – creams, gels, wipes. • Pet foods. • Can replacement opportunities in all markets.

Manufacturing Plant

Manufacturing Qualifications

Metal Can – Ring Pull vs Plastic Container – Ring Peel. The New Consumer friendly Ring Peel Seal from SelPac. Ring Pull – break a nail or use a knife . Ring Peel – grip and rip!

Remove the Ring Peel. Replace the cap to reseal.

If you have any questions please contact the SelPac European office: +44 (0)1925 752600. sales@selpac-europe.com www.selpac-europe.com