HAZARD AWARE NE SS PROGRAM September 2019 T hre e Main Obje - - PowerPoint PPT Presentation

hazard aware ne ss program
SMART_READER_LITE
LIVE PREVIEW

HAZARD AWARE NE SS PROGRAM September 2019 T hre e Main Obje - - PowerPoint PPT Presentation

Pre ve ntio n thro ug h De sig n HAZARD AWARE NE SS PROGRAM September 2019 T hre e Main Obje c tive s 1. Promote Hazard Awareness 2. Facilitate Risk Awareness 3. Implement Risk Controls GOAL : Ze r o Har m All accidents and


slide-1
SLIDE 1

Pre ve ntio n thro ug h De sig n

HAZARD AWARE NE SS PROGRAM

September 2019

slide-2
SLIDE 2

T hre e Main Obje c tive s

  • 1. Promote Hazard Awareness
  • 2. Facilitate Risk Awareness
  • 3. Implement Risk Controls
slide-3
SLIDE 3

ConocoPhillips Marine Safety Pyramid 2003

GOAL : Ze r

  • Har

m

All accidents and injuries can be prevented.

slide-4
SLIDE 4

I de ntify Critic al Risks

1. Confined Spaces 2. Electrical 3. Explosives 4. Working at Heights 5. Fire 6. Ground Control 7. Hazardous energy 8. Mobile Equipment / Driving 9. Lifting and Rigging

slide-5
SLIDE 5

Hie r ar c hy of Contr

  • ls

Eliminate: The complete removal of the hazard from the design Substitute: Replace the material or hazard with a less hazardous one Redesign: Design the equipment or work process in a different way Separate: Isolate the hazard by guarding it or enclosing it Administrate: Provide controls such as procedures, training, signage, etc. PPE: Use appropriate and properly fitted Personal Protective Equipment where other controls are not pratical

Effectiveness of applying controls to the design from highest to lowest

Modified from The National Institute for Occupational Safety and Health

Eliminate Substitute Redesign Separate Admin. PPE

slide-6
SLIDE 6

Pe rfo rm a Safe ty Re vie w o f the Drawing Pac kag e

During the Safety Review Meeting

  • Identify all applicable critical risks and

associated controls

  • update drawings to include risk controls.

Pr e ve ntion thr

  • ugh De sign Pr
  • je c t F

lowc har t

= To be completed prior to sending drawing packages to checking. Implement PtD controls into design. = Issuance to client.

slide-7
SLIDE 7

PtD Che c klist F

  • rmat

RISK CONSIDERED HAZARD IDENTIFICATION DESIGNED CONTROL

Confined Space Poor Egress or Contaminants Redesign space to improve access, Provide adequate ventilation Electrical Cabling in Accessed Areas Locate cables away from other services and equipment Explosives Product that is Explosive Explosion proof lighting, Eliminate ignition sources Working at Heights Working from Elevated Locations Eliminate the need (put all valves below chest level), Install handrails Fire Burning or Smoke Inhalation Include Fire doors and/or suppression, Locate lube/fuel near exhaust air Ground Control Fall of Ground Shotcrete in areas where high frequency of support damage Isolation (LOTOTO) Working on Energized Equipment

  • r Lines

Design accessible valves Easy locking at all shut offs Mobile Equipment / Driving Mobile Equipment Interaction with personnel Isolate pedestrians from mobile equipment with jersey barriers, Utilize Proximity technology Lifting and Rigging Falling materials, open holes Isolation zone, Barricading

slide-8
SLIDE 8

I nc o rpo rating safe ty into e ng ine e re d de sig ns impac ts the safe ty o f the pe o ple that use the m.

Que stio ns?