SLIDE 12 CLIENT & LOCATION LEAD NO. SALESMAN DATE DRAWN BY REVIEWED BY
REVISION SHEET NO. WWW.TRIANGLESIGN.COM 11 AZAR COURT • P.O. BOX 24186 • BALTIMORE, MARYLAND 21227 • T: 410-247-5300 • F: 410-247-1944 • REPRODUCTION IN WHOLE OR PART PROHIBITED WITHOUT EXPRESS PERMISSION OF TRIANGLE S & S •
1.25.2017
158715 R6 JJH
277 4TH AVE NEW YORK, NY 11215
K-1 K-1 K-2 K-2 K-3 K-3 K-4 K-4 K-5 K-5 K-6 K-6
DETAIL SECTION - TOP OF PANEL
K-2 K-2 K-3 K-3 K-4 K-4 K-6 K-6 K-5 K-5
DETAIL SECTION - BOTTOM OF PANEL
D M-1 M-1 M-4 M-4 W C H-1 H-1 A
J I-F I-F I-T I-T I-P I-P
G H M-7 M-7 F I-C I-C I-S I-S
J POWER SUPPLY
TYPE: VOLTAGE; REMOTE LED POWER SUPPLY HOUSE IN FRONT ACCESS WEATHER-PROOF LED POWER SUPPLY BOX. 120V
I
1/2” O.D. TRUE KONEK PVC TUBE TO ELECTRICAL FEED 1/2” LIQUIDTITE CONNECTOR 1/2” LIQUIDTITE U.L. APPROVED LOW VOLTAGE CLASS II WIRING ALL CONNECTIONS TO BE IN WATERPROOF BOXES WIRING I-C I-F I-P I-T I-S
W
1/4” DIA. WITH COVER WEEP HOLES: 120V
INSTALLATION NOTES:
- 1. CUSTOMER G.C. TO PROVIDE ADEQUATE WOOD OR MTL. BLOCKING
IN CORRELATION W/ FACADE FRAMING AS REQUIRED.
- 2. INSTALLER IS TO V.I.F. & PROVIDE THE PROPER NON-CORROSIVE
MOUNTING HARDWARE TO ENSURE SAFE INSTALLATION.
- 3. ALL EXTERIOR FACADE PENETRATIONS TO BE WATERTIGHT.
- 4. INSTALLATION TO MEET CURRENT N.E.C., U.L. & LOCAL CODES.
ELECTRICAL NOTES:
- 1. ALL ELEC. COMPONENTS TO BE U.L. APPROVED.
- 2. CUSTOMER IS RESPONSIBLE FOR ONE (1) 120v/ 20a DEDICATED
CIRCUIT w/ GROUND PER SIGN TO WITHIN 6' OF SIGN.
- 3. LOCKOUT SWITCH INSTALLED @ PANEL BOX FOR ALL ELEC. SIGNS.
- 4. INSTALL IN ACCORDANCE w/ N.E.C. ARTICLE 600 &/ OR LOCAL CODES.
THIS INCLUDES PROPER GROUNDING & BONDING OF SIGN.
FABRICATOR NOTES:
- 1. PLACEMENT OF LIGHTING ELEMENTS FOR OPTIMUM ILLUMINATION
OF SIGN TO BE DETERMINED IN PRODUCTION.
- 2. MANUFACTURER & U.L. LABELS TO BE APPLIED & VISIBLE FROM THE
- GROUND. ON THE LAST CHANNEL LETTER OR END OF THE SIGN BOX.
F ILLUMINATION
TYPE: STANDARD 6500K WHITE LEDS
A FACE
MATERIAL: COLOR; ‘blink’ LTRS: ‘LEFT’ DOT: ‘RIGHT’ DOT: FINISH: 1/8” ALUM. PAINTED TO MATCH PMS COOL GREY #11C PAINTED TO MATCH PMS 179 C PAINTED TO MATCH PMS 7460 C SATIN
C RETURNS
DEPTH: MATERIAL: COLOR; ‘blink’ LTRS: L ‘DOT’ COLOR: R ‘DOT’ COLOR: FINISH: VARIES O.A. ASSEMBLED 1/8” ALUM. PAINTED TO MATCH PMS COOL GREY #11C PAINTED TO MATCH PMS 179 C PAINTED TO MATCH PMS 7460 C SATIN
G FACE
MATERIAL: DEPTH: COLOR:/FINISH: G-1: .080” ALUM. PAN-FORMED FACE 1” PAINTED TO MTACH (E) BUILDING COLOR / SATIN VIF ¼” LIP ON BACKSIDE, TOP OF PAN-FORMED FACE
- ILLUM. ‘BLINK’ LTRS w/ CONTOUR PANEL on CUSOTM BKGRD - SECTION
SCALE: NTS
A-1
M K HOLD CLOSE
K-1: K-2: K-3: K-4: K-5: K-6: MOUNTING M-1: M-2: M-3: M-4: M-5: M-6: M-7: M-8: EXISTING WALL .080” ALUM. BRAKE-FORMED FACE STEEL TUBING RIVET
- ALUM. ANGLE WELDED TO FLAT BAR
¼” FLAT BAR SEE MOUNTING NOTE. (E) FASCIA WALL PRE-DRILLED HOLES WITH HIT-HY 150 MAX-SD INJECTABLE ADHESIVE ANCHOR & HVA CAPSULES HAS-R 304 ANCHOR ROD (MIN. 3/8” DIA.) 10-24 ALL-THREAD STUD, NUT & WASHER COUNTER-SUNK SCREWS FINISHED TO MATCH RETURNS SECURED THRU RETURN INTO TUBE FRAME. 1” ALUM. ANGLE VERSALOC TO BACK. FLUSH-FITTING MECH. FASTENER. HOLD CLOSE SCREW
H FRAMING
MATERIAL: H-1 STEEL SQ. TUBE
- ALUM. ANGLE WELDED TO BACK
M-2 M-2 M-3 M-3
D BACKS:
MATERIAL: VINYL: 1/2” PLATE, SANDED RETURNS. BLOCK OUT (WHITE STICKY SIDE TOWARDS LETTER)
G-1 G-1 K CONTOUR PANEL
MATERIAL: COLOR:/FINISH: 1/8” ALUM., CUSTOM ‘CONTOUR-SHAPED’ LOGO/LTRS PAINTED TO MTACH (E) BUILDING COLOR / SATIN VIF
K
M-6 M-6 M-8 M-8 M-7 M-7
M-5 M-5
5 of 12
LM 011
