CATALOGUE FASTNERS FASTENING TECHNOLOGY Tool Tool Yoshi 53/12 - - PDF document

▶

Jul 24, 2023 356 likes •528 views

EXPERT SUPPORT FOR PNEUMATIC SOLUTIONS FASTENING TECHNOLOGY FOREST PRODUCT CATALOGUE FASTNERS FASTENING TECHNOLOGY Tool Tool Yoshi 53/12 Dimensions Staple width, mm: 10.55 Wire section, mm: 0.5x1.25 Leg length, mm: 6-14 Intended use

SLIDE 1

EXPERT SUPPORT FOR PNEUMATIC SOLUTIONS

FASTENING TECHNOLOGY

FOREST PRODUCT

CATALOGUE

FASTNERS

SLIDE 2

FASTENING TECHNOLOGY

Dimensions Staple width, mm: 12.8 Wire section, mm: 0.66x0.95 Leg length, mm: 4-16 Intended use Upholstery staple. It is widely used in furniture production for upholstery and drapery. The wide back (12.8 mm) allows you to firmly fix the material without damaging it. Staples are galvanized, which guarantees a long service life and eliminates the occurrence of corrosion. Tool Prebena 1GP-A16LN50, Prebena 1GP-A16, Prebena 1XR-A16 Yoshi 8016-LN, Yoshi 8016, Yoshi 8016A, Yoshi 8016A-LM Dimensions Staple width, mm: 12.5 Wire section, mm: 0.5x1.25 Leg length, mm: 4-16 Intended use The upholstery staple is designed for attaching fabric, non-woven materials, and membranes to wood or wood boards using pneumatic and mechanical staplers. Staples are galvanized, which guarantees a long service life. Dimensions Staple width, mm: 11.4 Wire section, mm: 0.58x0.7 Leg length, mm: 6-14 Intended use It is designed for attaching fabric, non-woven materials, and membranes to wood or wood boards using mechanical staplers. It is often used in construction. It is made of steel with enhanced strength and stiness. Staples are galvanized, which guarantees a long service life. Tool Yoshi 53/12 Dimensions Staple width, mm: 10.55 Wire section, mm: 0.5x1.25 Leg length, mm: 6-14 Intended use The staple is designed for attaching fabric, non-woven materials, and membranes to wood or wood boards using mechanical staplers. It is often used in construction. Such a staple does not damage the material, for example, polyethylene. Staples are galvanized, which guarantees a long service life. Tool Prebena DNPF16, Prebena HHPF09-S19, Prebena HPPF14 Dimensions Staple width, mm: 10.55 Wire section, mm: 0.5x1.25 Leg length, mm: 6-14 Intended use The upholstery staple is designed for attaching fabric, non-woven materials, and membranes to wood or wood boards using mechanical staplers. The main application is upholstered furniture

production. Such a staple does not damage the material, for example, polyethylene. Staples are

galvanized, which guarantees a long service life. Tool Prebena DNPF16, Prebena ННPF09-S19, Prebena HPPF14

FASTENERS UPHOLSTERY STAPLE

SLIDE 3

FASTENING TECHNOLOGY

Dimensions Staple width, mm: 10.7 Wire section, mm: 1.39x1.58 Leg length, mm: 19-65 Intended use The heavy frame staple is used for fastening butt joints of wooden structures, and it also enables to securely attach materials of varying degrees of hardness to a wooden frame. This type ischaracterized by wire stiness and high fixing properties. It is widely used in furniture production for the assembly of wooden frames. Tool Prebena 4C-L50 Yoshi S40N, Yoshi S851N Dimensions Staple width, mm: 5.95 Wire section, mm: 0.83x1.08 Leg length, mm: 15-40 Intended use The staple of medium section is used for fixing hardboard and veneer in the furniture industry. Due to the narrow back, the staple provides a reliable and nearly invisible mount. Features of the staple are caused by scope of application—fastening of delicate materials and decorative details. The grinding and diameter allow you to mount without damage to the surface texture Tool Prebena 2P-ES40SDS, Prebena 2P-J/ES40Combi, Prebena 2XR-ES40 Dimensions Staple width, mm: 5.7 Wire section, mm: 1.00x1.25 Leg length, mm: 16-40 Intended use The frame staple of medium section, Type 90 (Prebena E), is used for a wide range of woodwork: installation of parquet and floorboards, fastening of panels, straps and string fillets, fastening of linings, baseboards, and platbands, as well as in the manufacture of wooden packaging and furniture

production. Staples are galvanized, which guarantees a long service life.

Tool Prebena 3GP-E40 Yoshi S9040E Dimensions Staple width, mm: 8.6 Wire section, mm: 1.00x1.25 Leg length, mm: 15-40 Intended use The frame staple of medium section is great for assembling wooden frames, fixing hardboard, and

ther sheet and roll materials. The staple, Type H, is used for mounting sealing and fabric tapes and

in the frame work with veneer in the furniture production. Tool Prebena 2P-H30SD Yoshi S9240H

FASTENERS UPHOLSTERY STAPLE

Dimensions Staple width, mm: 10.7 Wire section, mm: 1.18x1.54 Leg length, mm: 19-50 Intended use The heavy frame staple is used for fastening butt joints of wooden structures, and it also enables to securely attach materials of varying degrees of hardness to a wooden frame. This type is characterized by wire stiness and high fixing properties. It is widely used in furniture production for the assembly of wooden frames. Tool Prebena 4C-L50 Yoshi S40N, Yoshi S851N

SLIDE 4

FASTENING TECHNOLOGY

Dimensions Staple width, mm: 24.9 Wire section, mm: 1.39x1.58 Leg length, mm: 16-50 Intended use A large-section staple with a wide back is widely used where it is necessary to firmly fasten the material, but at the same time not to damage it, e.g., for fixing corrugated board to wood, heatinsulating materials, soft tiles, and other types of roofing; for fixing soft materials (foam plastic, hardboard, etc.), for splicing bars, veneer in wooden structures; sheathing crates of the container with a thin veneer. Dimensions Staple width, mm: 26.5 Wire section, mm: 1.39x1.58 Leg length, mm: 13-50 Intended use A large-section staple with a wide back is widely used where it is necessary to firmly fasten the material, but at the same time not to damage it, e.g., for fixing corrugated board to wood, heatinsulating materials, soft tiles, and other types of roofing. Also staple, Type WS, is used forfastening soft materials (foam plastic, hardboard, etc.), for splicing bars, veneer in wooden structures. Such a staple is used for sheathes sheathing crates of the container with a thin veneer. Tool Prebena 4C-WS38 Yoshi S40WS Dimensions Staple width, mm: 45 Wire section, mm: 36.0 Coating:: Znk Intended use The crimping staple is used to connect of mesh structures (gabions) with a mechanical or pneumatic stapler:

for strengthening and reinforcement of soft, unstable soil;
for decoration of landscape objects;
in the construction and strengthening of sea and river coastlines;
in the construction of engineering buildings of various functional.

Tool CR 45 gabion stapler Dimensions Staple width, mm: 24.5 Wire section, mm: 0.5 Leg length, mm: 9-25 Intended use The special fasteners, frame wavy staple of large section, are used for the production of upholstered and cabinet furniture. The wavy staple (“wave”) is intended for splicing two or more pieces of wood into a single canvas, while it does not require the use of glue and press. The main application: assembly of wooden frames. Tool Prebena 5C-WN15SNS, Prebena 6F-WN25SNS, Prebena 5P-WN15SNS Dimensions Staple width, mm: 11.2 Wire section, mm: 1.39x1.58 Leg length, mm: 22-64 Intended use The heavy frame staple is made of high strength metal. The staple is great for fastening sheet materials of frame housing construction, assembling furniture structures, boxes, pallets, etc. The heavy staple ensures a more reliable connection of parts. This convenient and reliable type of fastener can be used for a variety of materials

FASTENERS FRAME STAPLE / SPECIAL FASTENERS

SLIDE 5

FASTENING TECHNOLOGY

FASTENERS PACKING STAPLE

Dimensions Staple width, mm: 31.85 Wire section, mm: 0.9x1.91 Leg length, mm: 15-18 Coating: Zinc/Copper Intended use It is intended for the assembly and fastening of corrugated cardboard containers of any thickness using manual and pneumatic tools. Due to its wide back, the staple will provide a secure fit and will not damage the material. At low temperature and high humidity, the adhesive tape will come

, but the staple will withstand all weather conditions. It does not rust, does not oxidize, and

retains the shape of the box during transport. Tool Yoshi 32/19Р, Yoshi 32/19M Dimensions Staple width, mm: 13.04 Wire section, mm: 0.5x1.16 Leg length, mm: 15-22 Intended use The staple is designed to secure felt to spring blocks (in the manufacture of mattresses). Dimensions Staple width, mm: 17.8 Wire section, mm: 0.9x1.35 Leg length, mm: 10-18 Intended use The packing staple is designed for stitching the sides of large corrugated boxes and packaging of finished products. It is suitable for multi-layer cardboard. Dimensions Staple width, mm: 12.9 Wire section, mm: 0.50x2.55 Leg length, mm: 10-16 Intended use It is intended for stitching corrugated cardboard containers using manual and pneumatic staplers. This staple is suitable for stapling multi-layer corrugated cardboard. When the cardboard is connected, the HF staple ensures good toughness of the container and resistance to deformation during transportation and storage in warehouses. This staple is not afraid of humidity and changes in air temperature, provides a more durable and reliable fastening than adhesive tapes. Dimensions Type В16 Type В22 Type В19 Staple width, mm: 34.55 34.75 34.55 Wire section, mm: 0.86x2.25 0.86x2.25 0. 86x2.25 Leg length, mm: 14.70 21.5 17.60 Coating: Copper Copper Zinc Intended use It is intended for the assembly and fastening of corrugated cardboard containers of any thickness using mechanical and pneumatic tools. Due to its wide back, the staple will provide a secure fit and will not damage the material. At low temperature and high humidity, the adhesive tape will come o, but the staple will withstand all weather conditions. It does not rust, does not oxidize, and retains the shape of the box during transport. Tool Prebena KTVH-В19Н, Prebena KTVH-B19D, Prebena KTVH-B22D Yoshi 35/19M, Yoshi 35/19P

SLIDE 6

FASTENING TECHNOLOGY

Dimensions Wire section, mm: 0.64 Leg length, mm: 10-35 Intended use The pin with head AI is used for fixing parquet, frames, platbands, and baseboards. The pin AI is

ften used for invisible fixation of wooden elements, which is especially important when using

expensive wood, as it provides a reliable and trim fastening. The pins with head are galvanized, which guarantees a long service life and it is treated with an optimal layer of glue, which eliminates tool breakage. Tool Prebena 1GP-ALK35 Yoshi SU635

FASTENERS PIN / BRAD

Dimensions Wire section, mm: 1.05x1.25 Leg length, mm: 16-30 Intended use The pin GA is used in the furniture production, as well as fastening element when mounting various suspended structures and frames. The pin provides a secure attachment of materials, while the attachment point is almost invisible. According to GOST 3282, low carbon wire is used for the manufacture of pins. Tool Prebena 2M-GA32SDS Dimensions Diameter, mm: 1.8 Head section, mm: 3.2x1.8 Leg length, mm: 18-50 Intended use Furniture brad FST is used for fastening wooden elements to metal frames. The thickness of the steel frame should not exceed 0.8mm, and the recommended thickness of aluminum is up to 1.5mm. The brad FST provides a secure and an almost imperceptible mount due to the small head. Dimensions Wire section, mm: 1.6х1.4 Leg length, mm: 19-64 Intended use The brad N is used for attachment of finishing materials, such as imitation of timber, decking, bar, block house, and lining. This brad is also used for crates, assembling palisade and fences. The finish nail N provides high strength connection of parts and nearly invisible fastening. Brads have a protective and decorative zinc coating. Tool Prebena 3C-N65-S Dimensions Wire section, mm: 1.00x1.25 Leg length, mm: 10-55 Intended use The brad with a head is used when fixing lining, string fillets, parquet board, various layouts, where it is necessary to combine the reliability of fastening and visual accuracy of the junction. Tool Prebena 2P-J50SDS, Prebena 2P-J50SVN, Prebena 2XR-J50 Yoshi FN1850

SLIDE 7

NAILS

FASTENING TECHNOLOGY FASTENING TECHNOLOGY

CNW

coilnail coil roofing nail nail for concrete loose roofing loose

Dimensions Length, mm: 30-120 Coating: uncoated, galvanized Diameter, mm: 2.1-3.8 Knurling: without knurling, Slope angle: 15° screw, ring Intended use It is used in the construction, manufacture of pallets and wooden packaging, the manufacture of cable drums. The hot-melt adhesive applied to each nail increases bonding strength. Ring and screw knurling increases retention. Tool Tool Tool Dimensions Length, mm: 22-45 Diameter, mm: 3.1 Knurling: ring Intended use It is designed for secure mounting of roofing and other elastic, soft sheet materials to wood. The use of pneumatic tools and driving depth adjustment allows you to quickly and eciently do the hard work of covering the roof with soft roofing. Coating: zinc Slope angle: 15°Head diameter, mm: 9.5 Dimensions Length, mm: 20-40 Diameter, mm: 2.6-3.0 Intended use It is used for:

mounting thin metal profiles and profiled sheet;
mounting wood and veneer;
mounting metal mesh and perforated tape;
mounting plastic clips, cable ducts, clamps and holders;
installation of sheeting as a permanent formwork for steel

structural beams Dimensions Length, mm: 40-120 Diameter, mm: 2.5-3.8 Knurling: without knurling, screw, ring Intended use It is used in the construction, manufacture of pallets and wooden packaging, the manufacture of cable drums. Knurling can significantly increase the strength of bonding parts. Dimensions Length, mm: 25-90 Diameter, mm: 3.5 Intended use It is designed for secure mounting of roofing and other elastic, soft sheet materials to wood. Knurling: ring Coating: zinc Head diameter, mm: 9.5

SLIDE 8

SHINGLE NAILS

FASTENING TECHNOLOGY

aiming

Tool Tool Tool Tool Dimensions Length, mm: 50 Diameter, mm: 4.0 Knurling: ring Slope angle: 34° Intended use The nail is used in the installation of wooden structures (roofs, frameworks of buildings) with the use of perforated elements (corners, plates, tapes, brackets). The shape of the rod with many sharp rings enhances the adhesion of the nail to the wood. JH nail is used in all-in-one constructions where high bonding strength of wooden parts is necessary. Dimensions Length, mm: 15 Diameter, mm: 2.2 Intended use Special nail for fastening wood and wood plates to a metal or concrete base. It is in demand where it is necessary to fasten wood

r wood panels to more durable elements, to create structures

without the need for preliminary drilling—in construction, furniture production, and packaging. Dimensions Length, mm: 50-90 Diameter, mm: 2.8; 3.1 Head diameter: 7.0 Slope angle: 34° Intended use The nail is used in the installation of wooden structures (roofs, frameworks of buildings) with the use of perforated elements (corners, plates, tapes, brackets). The shape of the rod with many sharp rings enhances the adhesion of the nail to the wood. JH nail is used in all-in-one constructions where high bonding strength of wooden parts is necessary. Knurling: without knurling, ring Coating: zinc Dimensions Length, mm: 50-160 Diameter, mm: 2.5-4.6 Head diameter: 6.0-7.0 Intended use It is intended for automated fastening of wooden structures where high strength of connection of parts is required. It is designed for covering with wood, installation of window and door blocks, fixing floor coverings, manufacturing and repairing pallets, manufacturing containers, packaging, wooden structures that are subject to dynamic and vibration loads, fencing, as well as in general construction works, including facing and finishing. Knurling: without knurling, ring Slope angle: 21° Dimensions Length, mm: 65-100 Diameter, mm: 2.8-3.4 Head diameter: 6.5;7.5 Intended use It is intended for automated fastening of wooden structures where high strength of connection of parts is required. It is designed for covering with wood, installation of window and door blocks, fixing floor coverings, manufacturing and repairing pallets, manufacturing containers, packaging, wooden structures that are subject to dynamic and vibration loads, fencing, as well as in general construction works, including facing and finishing. Knurling: without knurling, ring Slope angle: 21°

SLIDE 9

SCREW, NAIL SCREW

FASTENING TECHNOLOGY FASTENING TECHNOLOGY

Dimensions Gypsum-metal DMP Length, mm: 25-45 Diameter, mm: 3.5 Slot: cross Intended use They are designed for fixing drywall to metal/metal profile. They are used with screwdrivers and various nozzles for automatic feeding. They are applied for high-speed and high-quality installation of drywall and other building materials for guides and metal profiles. This technology, together with the installation guns, allows increasing the installation speed tenfold. Tool Tool Tool Dimensions Gypsum-metal DWP Length, mm: 30-45 Diameter, mm: 3.5; 3.9 Slot: cross Intended use They are designed for fixing drywall to wood. Belted screws are used with screwdrivers and various nozzles for automatic feeding. They are applied for high-speed and high-quality installation of wooden structures, drywall, and other building materials to the guides of wood. This technology, together with the installation guns, allows increasing the installation speed tenfold. Dimensions Length, mm: 40-65 Diameter, mm: 3.2 Slot: Torx 20 Coating: zinc Intended use Due to their high strength, good resistance to lateral loads, and the possibility of hammering, higher resistance to tensile loads and the

pportunity of unscrewing with a conventional turn-screw or

screwdriver, they can be used in construction and finishing work, for the production of pallets, wooden boxes, and transport packaging

SLIDE 10

FASTENING TECHNOLOGY

Length, m 25 Wire diameter, mm 3.0/3.5/3.8 Number of turns 6-18 Turn height, mm 50 EURO turn height, mm 43 Coating type Zinc ROLL SNAKE WEBBING

Snake webbing is intended for

production of upholstery coil construction

INTENDED USE

DESCRIPTION:

Snake webbing is one of the most common upholstery coil construction. Fixed to a wooden or iron frame, due to the physical properties of the spring wire and its shape, the snake webbing dampens the eect on the frame when using furniture. The snake webbing is attached to the frame using a hinged bar or clips. Depending on the expected maximum loads and the size

f the frame, the length of the snake

webbing, its amount at the base and the diameter of the wire from which it is made may vary. The snake webbing is distinguished by a high-quality zinc coating and constant clear compliance with the parameters. Packaging in rolls

f 25 meters will allow you to cut a

snake in accordance with the size you need. ADVANTAGES:

1. High spring properties, not stretched
2. Resistance to critical loads
3. High assembly speed
4. Corrosion-resistant coating
5. Does not creak
6. Certificate of production conformity

Is0 9001

SLIDE 11

FASTENING TECHNOLOGY

Length, m 300-950 Wire diameter, mm 3.0/3.5/3.8 Number of turns 6-18 Turn height, mm 50 EURO turn height, mm 43 Coating type Zinc SNAKE WEBBING

Snake webbing is intended for

production of upholstery coil construction

INTENDED USE

DESCRIPTION:

f the frame, the length of the snake

webbing, its amount at the base and the diameter of the wire from which it is made may vary. The snake webbing is distinguished by a high-quality zinc coating, constant clear compliance with the parameters, and convenient packaging. ADVANTAGES:

1. High spring properties, not stretched
2. Resistance to critical loads
3. High assembly speed
4. Corrosion-resistant coating
5. Does not creak
6. Certificate of production conformity

Is0 9001

SLIDE 12

FASTENING TECHNOLOGY

For attaching a snake webbing

to a wooden or metal base of upholstered furniture

INTENDED USE

FASTENERS FOR SNAKE WEBBING Adjusting spring tension, kg up to 26 Wire diameter, mm up to 4

DESCRIPTION:

The ForestClip-F clip is designed to attach the snake webbing to a wood and metal base of upholstered

furniture. For fastening the clip to the

wood, use frame staples type L, LM with a length of 25mm. Clips are mounted to the metal frame with a type T nail, 25mm in length. The adjusting spring tension is up to

26kg. The wire diameter is up to

4.1mm. The clip allows you to securely and quickly attach the snake webbing to the furniture frame. ADVANTAGES:

1. Bonding strength
2. Can withstand heavy loads
3. Quick fastening of snake webbing

production conformity IS0 9001

SLIDE 13

FASTENING TECHNOLOGY

FASTENERS FOR SNAKE WEBBING CLIP

INTENDED USE

For attaching a snake webbing

to a wooden or metal base of upholstered furniture

DESCRIPTION:

The easiest way to attach the snake webbing to the base of upholstered furniture is to mount it with clips. The clip is a design of the cold-worked steel tape covered with a layer from HPP (high-pressure polyethylene). As a result, the tape is able to withstand large loads transmitted to the snake webbing, and the HPP layer does not allow the snake to creak when interacting with the clip. When forming the clip, holes are made for easy attachment to the furniture frame. ADVANTAGES:

1. Bonding strength
2. Can withstand heavy loads
3. Quick fastening of snake webbing

SLIDE 14

FASTENING TECHNOLOGY

For attaching a snake webbing

to a wooden or metal base of upholstered furniture

INTENDED USE

FASTENERS FOR SNAKE WEBBING HINGE PLATE Fastening interval, mm 97/130 Number in a roll, pcs 2.000 Fastening method “On the frame”

DESCRIPTION:

The hinge plate is a flat HPP tape with eyelets for fastening the snake webbing to the upholstered furniture

frame. The plate is made in rolls and

has a fixed distance between

fasteners. The plate is fastened to the

wooden frame with a staple and to the steel frame—with special nails. The use

f a hinge plate allows you to speed up

the assembly of upholstered furniture while improving the quality of the

assembly. According to the fastening

method, two types of plates —“on the frame” and “inside the frame”— are distinguished.

SLIDE 15

FASTENING TECHNOLOGY

Diameter, mm 70 Length, mm 50 Slot Hexagon Head type Countersunk Coating type Zinc FURNITURE CONFIRMAT

For assembling, knockdown

fastener element made of wood, chipboard, and veneer

INTENDED USE

DESCRIPTION:

The screw-confirmat is intended for assembly, knockdown fastener element made of wood, wood chipboard, plywood, etc. The confirmat has a countersunk head with internal hex. For corrosion protection, it is coated with a layer of

zinc. Wide screw thread ensures

high bond strength. The small diameter of the rod eliminates the appearance of cracks. Pre-drilling is required to install confirmat. ADVANTAGES:

1. Zinc coating
2. Bond strength
3. Easy to install