Schedule of Paper Presentation Date SESSION Topic No. 24-March - - PDF document

1

Schedule of Paper Presentation

Date SESSION Topic No. 24-March 15:00 – 16:20 1 Machining 20 24-March 16:40 – 18:00 2 Metal Matrix Composites 15 25-March 08:30 – 10:00 3 Polymer Matrix Composites 14 25-March 11:15 – 12:45 4a Model& Simulation 14 4b Materials -Thermal studies 12 4c Production Management 4 25-March 15:15 – 16:25 5 Metal Joining 17 TOTAL 96

Keynote Speakers:

Day 1 11:00 – 12:00 Dr. M. Ravi, CSIR, Trivandrum “Advanced Aluminium alloys for

Aerospace and Automotive Applications”

12:00 – 12:40 Dr David Juarez-Romero, Professor / Researcher Centro de Investigacion en Ingenieria y Ciencias Aplicadas- IICBA, Mexico “Process Modeling” Day 2 14:00 – 15:00 Dr. B.S.Murty, IITM “ Nanocrystalline Materials with exceptional

properties for engineering applications”

14:00 – 15:00 Dr. S.R. Koteswara Rao, SSN “Friction stir welding of Al and Mg

alloys- thick plates”

SESSION 1 – MACHINING Date: 24-03-2017 Time: 15:00–16:20 Venue - RAJAM HALL CHAIRPERSONS: Prof. G. Arumaikkannu

• Prof. P. Hariharan

Sl.No TITLE OF MANUSCRIPT

1. Effect of Deep Cryogenically Treated Tempered Electrodes during Electro Discharge Machining of AISI 304: A Comparison Study Munmun Bhaumik and Kalipada Maity 2. Experimental Investigations on Micro EDM of Titanium Alloy using Coated Electrodes Sathies T., Krishnaraj V. and Devi R. 3. Analysis the Effect of Ni-coated Tool Electrode on Machining α-Titanium in Electrochemical Micro Machining Process Geetha Priyan T. and Kalaichelvan K. 4. Electrochemical micro drilling of titanium alloy: a comprehensive study on influence of duty cycle Mythreyi O V, P. Hariharan 5. Machining Improvement of Aluminum-Steel Alloy through Optimization of Cutting Parameters

• D. Srinivas Rao, Krishanaiah, Y. Krishna and Syed Adil

6.

Study of Process Parameters on Surface Roughness during end Milling of Titanium Alloy (Ti-6Al-4V) Aditya R., Pradeep Kumar G. and Krishnaraj V

2 7. Study on Thermal Effects during High Speed Drilling of Titanium Alloy

• S. Jagatheesh Kumar, V. Krishnaraj, S. Hari Chealvan and A. Arockiarajan

8. Optimization of Machining Parameters on Electrochemical Micro Machining of Monel 400 using Grey Taguchi Analysis Arun Raj A.C., Geetha Priyan T., Senkathir S. and Manoj Samson R. 9. Influence of Process Parameters of Laser Beam Machining on Machining AISI 304 SS Ravi Akash, Dilip Kumar R., Shravan K., Muthuramalingam T. and Vasanth S.

• 10. Comparative Analysis of Dry and MQL Turning on Surface Roughness of AISI 410 Stainless

Steel using Taguchi Method Kamraan Akhthor P., Krishnaraj V., Karthikeyan V., Sachin B. and Vikash M

SESSION 1 – MACHINING Date: 24-03-2017 Time: 15:00–16:20 Venue - PONNAVAI HALL CHAIRPERSONS: Prof.A.Rajadurai

• Prof. M.Kanthababu
• 11. Experimental Investigation Of Tool Wear In High Speed Drilling Of Ti-6al-4v Alloy Under

Different Lubricating Conditions S.Hari Chealvan, Selvarajan V.Krishnaraj Vijayen

• 12. Optimization of Abrasive Water Jet Machining Process On Glass Laminate Aluminium

Reinforced Epoxy Manikandan.A, Raja NarayananS, Bhaskar.G.B

• 13. Reliability and life data analysis of tungsten carbide tool for the EN24 steel turning process

under accelerated tool wear test A.Gnanavelbabu, R.Baskaran, K. Rajkumar, P.Saravanan

• 14. Wire cut electric discharge machining of AA6061-CNT- boron carbide hybrid composite
• K. Rajkumar, Saigopal Vasudevan, Muthukumar, A.Gnanavel Babu
• 15. Process Optimization of wire Electro Chemical Machining of Aluminium/titanium Di-Boride

composite using Response Surface Methodology

• K. Rajkumar, P. Sabarinathan , A.Gnanavel Babu, S. Muthukumar
• 16. Tool Condition Monitoring through Acoustic Emission Signals in Micro-Turning of Inconel 600

alloy M.Durairaj, S.Gowri

• 17. Investigation of process parameters of Wire cut EDM on the surface roughness of EN353 Steel

and quality of the high contact ratio asymmetrical gear produced through Wire EDM. Rama Thirumurugan, Clement Christy Deepak .C 18. Study on Thrust Force and Torque in High Speed Drilling of Titanium Alloy S Krithikraj, K S Divya Prakash, R Dhivakar, S Gowrimanoharan, V Krishnaraj, S Hari Chealvan

• 19. Investigation of Material Removal and surface roughness of Soda Lime Optical glass polishing

using cerium oxide Ramesh Kumar .C, Omkumar. M

• 20. Study Of Deep Hole Piercing On Stainless Steel 316l By Abrasive Water Jet Machine

Lenin raj S, Rajadurai A

3

SESSION 2 – METAL MATRIX COMPOSITES Date: 24-03-2017 Time: 16:40–18:00 Venue- RAJAM HALL CHAIRPERSONS: Prof. S. Rajendra Boopathy

• Prof. K. Kalaichelvan

Sl.No TITLE OF MANUSCRIPT

1. Effect Of Processing Parameters On Hybrid Metal Matrix Composites In Stir Casting Process Using Taguchi Technique

• S. Rajesh, B.Rajeswari

2. Optimization of Machining parameters for drilling operation with multi objective using Genetic Algorithm of Al/SiC composites C.Dhavamani P.Sivakumar , S.Vinodh 3. An Experimental Investigation of Mechanical Properties of Aluminium 7075 Reinforced with Nickel Chromium and Graphite materials. Palani R, Sakthivel. M, and Subramanian. M 4. Influence of melt temperature on the formation of in-situ TiB2 particle in Al/TiB2 composite by aluminothermic reduction process A.S.Vivekananda, S. Balasivanandha Prabu, R. Paskaramoorthy 5. Effect of ultrasonic power on fabricating aluminum nanocomposites reinforced with boron carbide nanoparticles Poovazhagan Lakshmanan, Amith.S.C 6. Investigation On Influence Of Grit Size Of B4c Particles Over The Mechanical Properties Of B4c D 6061 Aluminium Composite N.Bhuvanesh, D.Dinesh, R.Ganesh Kumar, M. Gokul 7. Microstructure and Mechanical properties of AlSiC MMC fabricated by stir casting Prabu A,vasudevan N, G.B Bhaskar 8. Evaluation of flexural properties of copper honeycomb sandwich composites Vino A,.Kalaichelvan K,Babu K

SESSION 2 – METAL MATRIX COMPOSITES Date: 24-03-2017 Time: 16:40–18:00 Venue- PONNAVAI HALL CHAIRPERSONS: Prof G.S. Kandasamy Dr R. Sivaramakrishanan

9. Multi-objective Optimization of CNC Turning Parameters Using Genetic Algorithm and Performance Evaluation of Nanocomposite Coated Carbide Inserts During Turning of Inconel 600

• M. R. Pratheesh Kumar, S. Balakrishnan, R. Saravanan
• 10. Experimental Studies and Drilling Parameters Optimization of Novel Al6061 Hybrid

Composites M.Kumar, A.Megalingam, M.Kavin

• 11. Development of Aluminium foam by powder metallurgy

S.Banumathy, K.Kalaichelvan

4

• 12. Mechanical characterization Of Hybrid Aluminium Metal Matrix Composite By Stir Casting

Bandaru Sivakumar, P.Charan Theja, M.Chandra Sekhar Reddy, S.Jaya Kishore

• 13. Machining characteristics of aluminum fly ash composites during turning
• M. Satyanarayana , N. Praveen Kumar , U. Syam Prasad
• M. V. Jagannadha Raju , V.V. Kondaiah , R.N. Sen , B. Ratna Sunil
• 14. Oxidation Resistance Of HVOF Ni-Cr-Tio2 Powder Coating On Sa 213 T22 Alloy Steel At

Higher Temperature K Premkumar and K R. Balasubramanian

• 15. Experimental Investigations On Turning Of Aa6061/Sicp Metal Matrix Nanocomposites

Saravanamuthukumar.P , Poovazhagan.L , Arunkumaar.V , Arun.R

SESSION 3 – POLYMER MATRIX COMPOSITES Date: 25-03-2017 Time: 08:30 – 10:00 Venue- RAJAM HALL CHAIRPERSONS: Dr B.Kothandaraman Dr S. Sankar Sl.No TITLE OF MANUSCRIPT

1. Effect of UV exposure on tensile properties of flax/pp hybrid needle punched Nonwoven perform composites.

• A. K. P. Dhanakodi and V. R. Giri Dev

2. Design and Development of CRPF Beam with SMA Wire for Determination of Natural Frequency analysis Manoj Samson R, Vaddi Thulasikanth, Geethapriyan T, Arun Raj A C, Senkathir S 3. Improving the Mechanical Strength of Fused Deposition Modelling Processed Components Using Taguchi-Grey Relational Based Multi-Response Optimization

• J. Santhakumar, U.Mohammed Iqbal and M.Prakash

4. Mechanical and Vibration Testing of Fibre reinforced composites coir and sisal composite Tharanitharan .G, Tamilselvam .P, Tharoon .T, Dharanidaran .S 5. Characterization Of Human Hair Fiber Reinforced Polymer Composites K.Selvakumar, M.Omkumar 6. Scope Of Sterculia Foetida In Composites V.P.Vignesh , M. Omkumar , S. Anandakumar 7. Fabrication and Study of Mechanical Characteristics of Polycarbonate/Acrylonitrile Butadiene Styrene Composite Reinforced with Graphite Powders

• A. Inbaoli, P. K. Palani

SESSION 3 – POLYMER MATRIX COMPOSITES Date: 25-03-2017 Time: 08:30 – 10:00 Venue- PONNAVAI HALL CHAIRPERSONS: Prof. B.T.N.Sridhar

• Prof. S. Jayaraj

8. Effect of 0.5 wt. % AMWCNTs addition on the Fracture Behaviour of Epoxy and Epoxy-Carbon Fiber-Reinforced Composites

• K. Chandra Shekar, B. Anjaneya Prasad and N. Eswara Prasad

5 9. Effect of Cashew Nut Shell Oil (Cardanol) on Water Absorption and Mechanical Characteristics

• f Sisal Fibers
• R. Kannan, A. Vivek Anand, V. Hariprasad, R. Arvind Singh, S. Jayalakshmi, V. Arumugam
• 10. Experimental Investigation of Mechanical and Machining Characteristics of Aramid-Natural

Fiber Composite S.Rajesh, B.Vijayaramnath , J.Jeykrishnan, C.Elanchezhian, Akash Chowdhury, R Ashwin Sathya, V Varun Kalyanaraman

• 11. Preparation And Mechanical Properties Of Hdpe Reinforced With Rice Husk Ash And Nanoclay

Composites N.Venkatesana, G. B. Bhaskar and K. Pazhanivel

• 12. Evaluation Of Mechanical Properties Of Sisal Fiber Reinforced Epoxy Matrix

K.Venkatesan , G.B Bhaskar

• 13. Tribological Analysis Of Graphene Oxide Reinforced Hybrid Polyamide Bearings Under Radial

Loading Conditions In Dry Rolling Contact Behaviour Geetha Rajamani, Jawahar Paulraj

• 14. Investigation On Core Shear Properties Of Novel Sandwich Strucutre By Beam Flexure

Pandyaraj V, Rajadurai A

SESSION 4A - MODELLING AND SIMULATION Date: 25-03-2017 Time: 11:15 – 12:45 Venue- RAJAM HALL CHAIRPERSONS: Prof. S. Sathikh

• Prof. G.L. Samuel, IIT-M

Sl.NO TITLE OF MANUSCRIPT

• 1. Design and Analysis of a Novel Fixture for Hydraulic Testing of a Boiler Recirculation Mixing

Sphere: A Case Study

• P. Udayanand, P. Asokan
• 2. Numerical Modeling Of Temperature Distribution And Material Removal Rate In Electric

Discharge Machining Kathiravan S , Pradeep kumar J

• 3. Performance and Analysis of Small Horizontal Axis Wind Turbine

P.Sivakumar C.Dhavamani , S.Vinodh

• 4. Modeling Simulation And Analysis Of Grasping Pose For Novel Objects

Dhanasekar.J, Sengottuvel.P

• 5. Experimental and Numerical Analysis on Fatigue Life of Aluminium Alloy 7075-T6

Naveen Kumar K , Vijayanandh R , Senthil Kumar M , Raj Kumar G and Mohamed Bak

• 6. Design of Automated Fender System

Arul Noble Jose Rohan, Hariharasudhan R, Durga M, Vijayalakshmi K

• 7. Investigation on Resonance, Sine and Random Vibration Testing of a Cube Satellite

Prithivirajan.S, Jayan Prathap.K, Arumugam.V, Ramakrishna.P.V, Rajadurai.A

• 8. A Numerical study of stress and Temperature on Turning process by using DEFORM 3D

U.Vishnuja, G.B. Bhaskar , Manu ravuri

• 9. Finite Element Analysis of Oblique Cutting Performance of Micro Textured Tool

Rajendra Hodgir, Mate Akshay D, Roshan Sasi, Kanmani Subbu S.

• 10. Simulation and Analysis of Semiactive and Active Suspension System

Barethiye V. M., Pohit G., Mitra A.

6

• 11. Augmented Reality Based Guidance for controlling Remote Manipulators

C.Rajendra Thilahar, R.Sivaramakrishnan

• 12. Simulation of vertical and inclined loading of a plywood platform on soft soil

T.Chowdhury, D.Sathianarayanan, S.B.Pranesh, K.N.V.V.Murthy, K.V.Reshma, S.Ramesh, G.A.Ramadass

• 13. Numerical Simulation of the effect of Relative Density on the Toughness of Random Pored

Cellular Structures

• A. Suresh Babu, P. Prasanna Kumar, M. Jaivignesh, M. Sugavaneswaran,
• G. Arumaikkannu
• 14. Modeling and Implementation of 3 Degree-of-Freedom Customized Haptic Device for Skin

Surgical Simulation Sabique P.V, R. Sivaramakrishnan, P.Karthikeyan

SESSION 4B&C - MATERIALS – THERMAL STUDIES & PRODUCTION MANAGEMENT Date: 25-03-2017 Time: 11:15 – 12:45 Venue- PONNAVAI HALL CHAIRPERSONS: Prof.R.KrishnaMurthy (Retd. IIT-M)

• Prof. S. Gajendran

Sl.No TITLE OF MANUSCRIPT

1. Synthesis And Characterisation Of Nanoparticles €“ Cuo And Zno M.Muthuselvi, M.P.Praveen, Anam Zeba Liakath and Eniya Karunamurthy 2. Investigation on the effect of suspended nano Al2O3 and CuO particles in brake fluids V.Vijayasarathya, S. Achuthana, K. Balachandara 3. High Temperature Cyclic Oxidation Behavior Of Hvof Sprayed Cr3c2-20%Tio2 Coatings On Sa 213 T22 Boiler Steel K Premkumar and K R. Balasubramanian 4. Tuning the physical properties of spray pyrolysed nanocrystalline CdO thin films by varying the substrate temperature S.J.Helen, Suganthi Devadason, M. Haris, T.Mahalingam 5. Structural Analysis of Anatase, Rutile, Brookite phases of TiO2 nanoparticles : A comparative study

• M. Joyce Priscilla, S. Prathiba Ponmary,Suganthi Devadason

6. Conventional and Depth Sensing Indentation Behaviour of Ti-6Al-4V and Haynes 242 Alloys B.SridharBabu, A.Kumaraswamy, B.AnjaneyaPrasad 7. Analytical Investigation And Improving The Material Characteristics On Polypropelene Adding With High Density Polyethelene (HDPE) V.Aravindan , N. Ramadoss, K. Pazhanivel, G.B.Bhaskar 8. Enhancing the Design to optimize the performance of Double Basin Solar Still S.joe patrick gnanaraj, s.ramachandran 9. Experimental Study Of R32/R600a/R290 To Replace R134a In A Domestic Refrigerator Balakrishnan.P, Maniraj, M Muthukrishnan

• 10. Thermal property measurement and rheological behavior of DI water based Cu doped ZnO

nanofluids Kiruba.R, Gopalakrishnan. M and Kingson Solomon Jeevaraj. A

• 11. Synthesis and Experimental Analysis of Novel TiO2-Nanographene Nano Fluids for Thermal

Enhancement in Flat Plate Heat Pipes P.Pandiyaraj, A.Gnanavelbabu, P.Saravanan

7

• 12. Performance Analysis And Comparison Of Inclined Type Solar Still By Using Nano Materials

And Wick Absorber V.Porselvan , N. Ramadoss, K.Pazhanivel, G.B.Bhaskar

• 13. Optimization of turning process parameters using combined moora and ahp method
• B. Singaravel, K.Chandra shekar, T.Selvaraj
• 14. Fault diagnosis of self-aligning troughing rollers (SATR) in bulk material handling belt conveyor

system by k-star algorithm

• S. Ravikumar, H.Kanagasabapathy, V. Muralidharan
• 15. Optimizing maintenance management through tpm and measuring the overall equipment

effectiveness (oee)

• Md. Mynur rashid, SK. Riad bin Ashraf,. Shamsuddin Ahmed
• 16. Implementation of mistake proofing tool of lean manufacturing in automotive assembly unit

Rajan kumar, R. K.dwivedi

SESSION 5 - METAL JOINING Date: 25-03-2017 Time: 15:15 – 16:25 Venue- RAJAM HALL CHAIRPERSONS: Prof B. Rajmohan

• Prof. L. Karunamoorthy

Sl.No TITLE OF MANUSCRIPT

1. Influence of process parameters of Friction Stir Butt Welded Aluminum Alloy 6082-T6 in various Heat Working Conditions J.Yasin,G.Rajkumar,S.Gopi 2. Study of the Effect of Cylindrical Threaded Pin Tool on Microstructure and Mechanical Properties of Friction Stir Welded AA 6061-T6 Abhijit Banik, B. S. Roy, J. DebBarma, S.C. Saha 3. Investigations on joint interfaces of dissimilar friction stir spot welded Al/Cu joints

• S. Siddharth, T. Senthilkumar

4. Study the microstructure and mechanical properties of TiC and B4C reinforced AZ31B Magnesium alloy joints using FSW process J.Balaji, Dr.S.Vijayakumar 5. Mechanical Properties of Gas Metal Arc Welded Dissimilar Aluminium Alloy Joints M.Kalai Selvan, A.Mathivanan, G.Swaminathan 6. Numerical Simulation of Various Tool profile Influenced in Friction Stir Welding

• R. Manikandan, G. Elatharasan

7. On the Issues of Surface Strain in Friction Stir Welding of AA6061-T6 Krishnapada Sinha, Tanmoy Medhi, Barnik Saha Roy, Subhash Chandra Saha 8. Microstructural and Mechanical Studies of Nano-Graphene Reinforced Al-2024 Surface Composite by Friction Stir Processing V.Kalyanamanohar M.Sai Rama Krishna A.Veera Srinu 9. Evaluation of Microstructure and Mechanical Property of Ti-6Al-4V Brazed Joint with Low Temperature Filler Metal S V Anil kumar, R Gandhinathan

8

SESSION 5 - METAL JOINING Date: 25-03-2017 Time: 15:15 – 16:25 Venue- PONNAVAI HALL CHAIRPERSONS: Prof. S. Venkataswamy

• Prof. S. Sampath Kumar

1. Prognosis of Microstructure And Mechanical Properties of Butt Welded Stainless Steel 304 By Using Plasma Arc Welding Naveen Kumar M, Gokul S, Santhosh Kumar S, Benignusbablonerudo P, 2. Scale down approach to solve distortion problem in case of wind turbine tower fabrication

• M. Sarfudeen, R. Pradnyesh Prabhu and S. Muthukumaran

3. A study on influence of underwater friction stir welding on microstructural, mechanical properties and formability in 5052-O aluminum alloys

• K. Tejonadha Babu, S. Muthukumaran, C. Sathiya Narayanan

4. Investigation of Friction Stir Welding-Dissimilar Copper And Brass Plates

• N. Srirangarajalu , S.R. Koteswara Rao and A. Rajadurai

5. Effect of Friction Stir Processing on Microstructure and Dry Sliding Wear Behaviour of Al/TiO2 Composite

• V. K. S. Jain, S.Muthukumaran

6. Corrosion Analysis on Submerged Friction Stir Processed AZ31B Alloy Udayakumar M, Sankar.R, V.S.Senthil Kumar and Rathinasuriyan.C 7. Multi-Response Optimization of Friction Stir Welded AA2219-T87 by Taguchi -Grey Relation Analysis and Metallurgical Inferences Dinesh Kumar R, S.Muthukumaran, T.Venkateswaran, D.Sivakumar 8. Effect of Post Weld Heat Treatment On Mechanical Properties And Microstructural Characteristics Of Gas Tungsten Arc Welded Dissimilar Joints of Aluminium Alloys S.R.Sundara Bharathi ,R.Rajeshkumar and A.Arul Marcel Moshi