Registered Office & Works Apurva Industrial Estate, Unit No.26, 1 - PDF document

Established in 1987 Registered Office & Works Apurva Industrial Estate, Unit No.26, 1 st Floor, Marol, Andheri (East), Mumbai – 400 059. Maharashtra – INDIA. Telephone Nos : 022 ‐ 28502612, 022 ‐ 28596628, 65200585/86 Fax No.: 022 ‐ 2850 0414. Email: wesmec_engineering@yahoo.co.in, enquiries@wesmec.com, Website : www.wesmec.com 1

� Introduction � Company details � Organization Chart � Range of Products � Technical details � Testing & Inspection � Machineries � Partial list of consultants and major clients � Appreciation / Registration letters � ISO Certificate. � NSIC-Crisil Rating Certificate WESMEC ENGINEERING PVT.LTD Email: enquiries@wesmec.com, wesmec_engineering@yahoo.co.in Website: www.wesmec.com AN ISO 9001-2008 COMPANY 2

INTRODUCTION Dear Sir/ Madam, We are an ISO 9001:2008 certified company engaged in manufacturing of Twin Ferrule Compression Fittings (Equivalent to Swagelok / Parker), High Pressure / Needle Valves, 2. 3 & 5 Valve Manifolds, Condensate Pots, and Air Headers confirming to relevant ISO specifications. Since inception in the year 1987, WESMEC has established itself as one of the leading and reliable manufacturer and supplier of Instrumentation Fittings, Valves, Pipes, Flanges etc. to the projects, industries and OEMs. Our well equipped factory with modern machinery and test equipment, technical capabilities, consistency in quality and timely deliveries have brought us many laurels and appreciation certificates from our valued customers is attached for your kind perusal.. We are registered as an approved vendor for these fittings/accessories with leading Consultants, Industries, OEMs such as Jaccobs H & G, Uhde, Toyo, Technimont ICB, Tata Consultancy Services, NPCIL, BARC, BPCL, HPCL, ONGC, Reliance Industries Ltd. Mazagaon Dock Ltd, and many more reputed companies, we are regularly catering to their requirements for their existing operations and new projects. We understand that you do have regular requirement of these fittings & accessories for your existing operations / project and we can meet the same to your entire satisfaction. Kindly therefore register us as an approved vendor and favor us with your valued enquiries & orders which we assure you will get our prompt attention at all times. We shall be glad to comply with your registration requirement if any and shall depute our executive to call on you for personal discussions with prior intimation. Thanking you and looking forward to receiving your esteemed patronage. Best Ragards, Emedius A. Aranjo Director Mob: 09869064386 WESMEC ENGINEERING PVT.LTD Email: enquiries@wesmec.com, wesmec_engineering@yahoo.co.in Website: www.wesmec.com AN ISO 9001-2008 COMPANY 3

Company Details Name of the organization : M/s. WESMEC ENGINEERING PVT.LTD. Name of Managing Director : Mr. Emedius A. Aranjo. Name of Director : Mrs. Dorothy Emedius Aranjo. Established in the year : 1987. Registered Office & : Apurva Industrial Estate, Works Address Unit No.26, 1 st Floor, Marol Andheri ( east ), Mumbai – 400 059. Maharashtra – INDIA. Telephone Nos : 022-28502612, 28596628, 65200585/86/87. Fax No. : 022- 2850 0414. Email : wesmec_engineering@yahoo.co.in : enquiries@wesmec.com , Website : www.wesmec.com Name & address of Bank : Uco Bank, Andheri (East), Mumbai – 400 059. & Development Credit Bank, Mahim 400 016. S.S.I. No. : 27221200656 Dated 19.12.2010. C.S.T. No. : 27710010761C dated 01/04/2006. V.A.T.No. : 27710010761V dated 01/04/2006. Permanent Income Tax No. : AAACW3489J WESMEC ENGINEERING PVT.LTD Email: enquiries@wesmec.com, wesmec_engineering@yahoo.co.in Website: www.wesmec.com AN ISO 9001-2008 COMPANY 8

Organization Chart MANAGING DIRECTOR Marketing Production Quality Assurance Finance & Manager Manager Manager Accounts Purchase Executive Sales Technicians M/c Operators Testing Executive Supervisor Inspection Sales Workers Engineers Co-ordinators WESMEC ENGINEERING PVT.LTD Email: enquiries@wesmec.com, wesmec_engineering@yahoo.co.in Website: www.wesmec.com AN ISO 9001-2008 COMPANY 9

IN-HOUSE TESTING & INSPECTION FACILITIES. (As per BS 4368 Part IV) LIST OF TESTING EQUIPMENTS: HYDROSTATIC TEST PUMP SUITABLE TO TEST UPTO 20,000 PSI. Testing of Tube Fittings shall be carried out 2-4% of sample size/ as per Q.A.P. Testing of valves shall be carried out 100% of sample size / as per Q.A.P. PNEUMATIC TEST SET UP SUITABLE TO TEST UPTO 2000 PSI Testing of Tube Fittings shall be carried out 2-4% of sample size/ as per Q.A.P. Testing of valves shall be carried out 100% of sample size / as per Q.A.P. VIBRATION TESTING MACHINE UPTO FREQUENCY 1440 R.P.M. Set up is suitable to operate at frequency of 25/30 cycles per second. Test can be offered as per specification provided by customer /user. PRESSURE CYCLING TEST SET UP. Pressure cycling pump available with us can be adjusted & set as per client specification / Test requirements. VACCUM PRESSURE TEST. Vacuum test shall be carried out up to 700ml Bar. HARDNESS TESTING MACHINE. To detect hardness of the material with suitable indenters. TEMPERATURE CYCLING UNIT. The above unit can be subjected to temperature cycles of specified required hours to a maximum temperature up to 350 deg C from the lowest 27deg C. WESMEC ENGINEERING PVT.LTD Email: enquiries@wesmec.com, wesmec_engineering@yahoo.co.in Website: www.wesmec.com AN ISO 9001-2008 COMPANY 10

Gauges available at our works for Inspection Plug Gauges for Tube O.D. Plug Gauges for Tube O.D. ( in inches) ( in milimetre. ) SIZE GO NOGO SIZE GO NOGO 1/16 1.7 1.78 3 3.12 3.2 1/8 3.29 3.37 4 4.12 4.2 3/16 4.88 4.96 6 6.12 6.2 ¼ 6.47 6.55 8 8.12 8.2 5/16 8.05 8.13 10 10.12 10.2 3/8 9.64 9.72 12 12.12 12.2 ½ 12.82 19.9 16 16.12 16.2 5/8 15.99 16.07 18 18.12 18.2 ¾ 19.17 19.25 20 20.12 20.2 7/8 22.34 22.42 25 25.12 25.2 1 25.52 25.60 Unstraight thread Plug / Ring Un straight thread Plug / Ring Gauges for tube O.D (in inches) Gauges for tube O.D (in mm) 1/16” 10-32 3 5-16-20 18” 5/16-20 4 3/8-20 3/16” 3/8-20 6 7/16-20 ¼” 7/16-20 8 ½ -20 5/16” ½ - 20 10 5/8-20 3/8” 9/16-20 12 ¾ - 20 ½” ¾ -20 16 7/8-20 5/8” 7/8-20 18 1-20 ¾” 1-20 20 1.1/8-20 7/8” 1.1/8-20 25 1.5/16-20 1” 1.5/16-20 NPT Ring/Plug Guages 1/16”NPT 1/8”NPT BSP Ring/Plug Guages ¼”NPT 3/8 NPT ½” NPT ¾” NPT ¼” BSP 1/8”BSP 1” 1 ½” NPT 3/8”BSP ½” BSP 2” NPT ¾” BSP 1” BSP 1 ¼” BSP 1 ½” NPT Socket weld Guages 2” BSP ¼” NB 1/8” NB ½” NB 3/8” NB ¾” NB 1” NB 1 ¼” NB 1 ½” NB 2” NB WESMEC ENGINEERING PVT.LTD Email: enquiries@wesmec.com, wesmec_engineering@yahoo.co.in Website: www.wesmec.com AN ISO 9001-2008 COMPANY 11

Machineries and Testing equipments Sr. No. DESCRIPTION QUANTITY. 1. CNC TURNING CENTRE 01 Nos. 2. CAPSTAN LATHE MACHINE 02 Nos. 3. CENTRE LATHE MACHINE 06 Nos. 4. DRILLING MACHINE 02 Nos. 5. BAND SAW 01 Nos. 6. HACKSAW MACHINE 02 Nos. 7. BENCH GRINDER 02 Nos. 8. TAPPING MACHINE 01 No. 9. BUFFING MACHINE 01 Nos. 10. ROLL MARKING MACHINE 01 No. 11. CNC PIN MARKING MACHINE 01 Nos. 12. IMPACT PRESS 01 Nos. 13. PIPE CUTTER 01 Nos. 14. ULTRASONIC CLEANING MACHINE 01 Nos. MACHINERY CONTRACTED 15. CNC 01 No. 16. CENTRAL LATHE MACHINE 42 Nos. 17. DRILLING MACHINE 05 Nos. 18. BAND SAW 01 No. 19. HACH SAW 06 Nos. 20. SHAPPING MACHINE 02 Nos. WESMEC ENGINEERING PVT.LTD Email: enquiries@wesmec.com, wesmec_engineering@yahoo.co.in Website: www.wesmec.com AN ISO 9001-2008 COMPANY 12

Range of Products Sr.No. Description Standard Material of Sizes Construction 1. Compression Tube Fitting SS 316, SS 304, MONEL, BRASS 1/6” – 2” (manufactured in designs ETC. equivalent to Swagelok & Parker Type compression) 2. Ermeto Type Compression SS 316, SS 304, CARBON STEEL, 1/8” – 2” Fittings. MONEL , BRASS ETC. 3. Olive Type Compression BRASS 1/8” – 2” 4. Needle/ Ball Valve SS 316, SS 304, CARBON STEEL, 1/8” – 2” [NPT/BSP/(M/F)/NB] MONEL, BRASS ETC. 5. Needle / Ball Valves with Tube SS 316, SS 304, CARBON STEEL, 1/8” – 2” End Connection. MONEL, BRASS ETC 6. Globe Valves/ Gate Valves SS 316, SS 304, CARBON STEEL, 1/8” – 2” MONEL, BRASS ETC 7. 2,3 & 5 Valve Manifold SS 316, SS 304, CARBON STEEL, 1/8” – 2” MONEL, BRASS ETC 8. Condensate Pots / Drip Pots SS 316, SS 304, CARBON STEEL, 2” – 6’ as per Alloy Steel. customers request. 9. AIR HEADERS (Distributor) SS 316, SS 304, CARBON STEEL. 1” – 6” as per customers request. 10. SYPHONS / SNUBBERS SS 316, SS 304, CARBON STEEL, As per customers Alloy Steel. request. Apart from the above mentioned material of construction , we do also manufacture in SS 316L , SS 304L, Hastalloy ‘B’ & ‘C’ Enconel , Alloy . Steel , Teflon and any special machineable material. We deal in the following items: � Copper Tubing as per ASTM, DIN & BS Standard. � SS Tubing as per ASTM, DIN & BS Standard. � SS Pipes as per ASTM, DIN & BS Standard. � SS/CS , Alloy Steel Forged Flanges. WESMEC ENGINEERING PVT.LTD Email: enquiries@wesmec.com, wesmec_engineering@yahoo.co.in Website: www.wesmec.com AN ISO 9001-2008 COMPANY 13