LED JOBSITE LED Jobsite lighting is a sustainable way to light up - - PowerPoint PPT Presentation
LED JOBSITE LED Jobsite lighting is a sustainable way to light up your jobsite that will save you time and money while helping you win more jobs. AGENDA About us and the LED Jobsite Things you should know How LED Jobsite works
LED Jobsite lighting is a sustainable way to light up your jobsite that will save you time and money while helping you win more jobs.
light your jobsite:
The LED Jobsite is a completely new way to think about jobsite lighting. Forget bulb-based string lights and highbays, the LED Jobsite brings state-
game on lighting up jobsites. Actual LED Jobsite. Every light in this picture is a Lind LED Jobsite light.
bay lights. LED Jobsite lights will nearly eliminate the need for string lights.
your current lights with LED bulbs.
might think.
Using a temporary lighting layout example we will compare the 3 different ways to light your jobsite:
high bay lights.
Post-secondary education facility 1 floor - 84,000 sq ft Ceiling heights 12’-23’ 2 year project Lit to OSHA standards (5fc)
What’s the problem with string lights?
costs.
requires extra circuits to be run.
stage.
electrical and HVAC).
CFL / Incandescent / Metal-Halide
lights required to meet the OSHA standard.
Traditional string lights with LED bulbs:
power consumption and no bulb changes.
& fit-out stage.
Traditional string light sets with LED bulbs
This approach is NOT recommended because it does not take advantage of the full potential of LED lighting technology.
lights required to meet the OSHA standard.
LED Jobsite delivers a comprehensive lighting solution, providing the right light for the right application.
functionality that can not be achieved by bulb-based lighting.
alternative to string lights
LED Jobsite lights evolve throughout the project as your temporary lighting needs change. Lights hung in open areas during structural build can be quickly transitioned
No more do you need to build drywall around cords and string lights. The LED Jobsite has the flexibility to change with your needs.
Bulb-Based LED Bulbs LED Jobsite Total Wattage 21,900 W (CFL)
(91,200 W Incand)
14,850 W 4,530 W Electricity Cost $50,265 $34,080 $10,400 Circuits Required 12 8 3 Points of Installation/ Maintenance 903 903 63 Replacement bulbs $5,796 bulbs only
(+ $11,250 for labour)
n/a n/a Initial Investment $13,860 $28,200 $16,545 Total Cost
(w/o labour)
$69,919 $62,280 $26,945
Reduce the number of temporary lighting circuits (fewer circuit runs, smaller panel size and temp power distribution). LED Jobsite accommodates for up to 10X more lights per circuit.
development (demo/build/fit-out). Existing lights can be easily repositioned and repurposed for new areas. No need to purchase additional lights for different phases. No maintenance. No bulbs to break. LEDs are rated for 50,000 hours, unlike bulbs which require replacing on a regular basis Decrease installation time with fewer lights to hang. Lower repurposing and uninstall time. Lights easily come down and move. Reuse the lights again and again from project to project, further increasing your ROI.
Sustainability and Green Innovation (significant and quantifiable). Reduced CO2 emissions. Earn a LEED credit for using LED Jobsite, a great value add! Lind will assist with LEED application. Reduced Downtime – LED lights turn on instantly, even on restart after a power outage. Many bulb based construction lights take up to 15 minutes to completely restart. Fuel Savings – Fuel consumption on generators that run temporary lighting is drastically reduced. Reduced waste. LED temporary lighting can be reused over multiple jobs & there is no bulb disposal.
Make your construction project one that helps the planet. The LED Jobsite reduces CO2 emissions and waste.
shopping destination just outside of Vancouver Savings Summary Electricity savings of over $110,000 Replacement bulb savings over $10,000 Over 1,000,000 kWh of energy was saved (equivalent to powering almost 100 homes for a year) Over 700 metric tons CO2 was avoided (equivalent to taking 149 cars off the road)
400W metal halide high bays
up an entire city block Savings Summary Electricity savings of over $1,000,000 Replacement bulb savings over $20,000 Over 14M kWh of energy was saved (Over 3M kWh had CFL been the default) Over 9,500 metric tons CO2 was avoided (equiv. to taking more than 2,000 cars off the road)
lights and metal halide lighting
Plan
plans.
ceiling heights, square footage, ambient lighting, project location, etc.
Deliver
Save
calculators and analysis
reduction data
Program
For more information, visit our booth (C3 in the Courts)
(877) 475-5463 www.ledjobsite.com www.lindequipment.net
THANK YOU!