H-Flex Steam Liner Flexitank Heating Method Introduction What is - - PowerPoint PPT Presentation
H-Flex Steam Liner Flexitank Heating Method Introduction What is is H-Fle lex Steam Liner? Patented by LiquA, H-Flex Steam Liner is the first and only, flexitank total heating system in the industry. The old heater pad technology is left
Patented by LiquA, H-Flex Steam Liner is the first and only, flexitank total
with this revolutionary method. H-Flex Steam Liner is a chamber to preserve and circulate steam all around the flexitank, bottom, center and top.
Up to 4 bars, 130 °C steam is to be applied into the Steam Liner. The steam distributor circulates the steam all around the flexitank surface and heats the cargo with high transmission rate. Eventually steam condenses to cold water by transmitting its whole heat/energy to the cargo. 130°C steam condenses to 20°C water. To increase efficiency, the cold water is being discharged during the heating process. In a nut shell;
main cause of the energy loss. This feature increases the heating performance and shortens the heating
Steam
Steam Liner
Grids Steam Cold water
Plastic Gri rids elevate the flexitank to generate a gap/tunnel underneath the flexitank for efficient steam distribution. The St Steam Di Distrib ibutor distributes the steam through the grid tunnels directly to the critical points. Center and front end…
The first and only flexitank that;
more per container creating a savings of 12% on overall freight cost.
heating at the final destination, up to 20 times faster compared to conventional heating pads.
transmission to the entire cargo. Steam circulation all around, bottom, center & top surface of the flexitank. Case Study The Liqua H-Flex & a conventional flexitank containing the same product (palm stearin) were heated side by side. The Liqua H-flex Steam Liner fully heated all the product & was completely discharged in 18 hours. The conventional flexitank with heating pad fully heated & discharged in 14 days.
double valved versions for non-homogenous, sedimenting cargos.
Introduce steam to the St Steam Lin iner at the final destination and when the cargo liquefies, discharge as a regular flexitank.
Thanks to advanced steam heating technology, H-Flex Steam Liner ensures minimum residue and energy consumption compared to any other alternative solutions.
Up to 20 times shorter heating time.
Less energy consumption.
Low residue for recycling.
Thanks to our worldwide network, we offer you a solution satisfying technical & logistic requirements of both shipper and consignee with a custom made packaging.