CATALOGUE INSTRUMENTS - - PDF document

EXPERT SUPPORT FOR PNEUMATIC SOLUTIONS

FASTENING TECHNOLOGY

FOREST PRODUCT

CATALOGUE

INSTRUMENTS

Content....................................................................................2 About Company..................................................................3 Pneumatic Staplers for Staples..................................4 Pneumatic Staplers for Packaging.........................22 Pneumatic Staplers DIY-Series...............................30 Pneumatic Nailers for Pins & Brads......................35 Pneumatic Nailers for Nails.......................................42 Other Instruments..........................................................63

FASTENING TECHNOLOGY

CONTENT

FASTENING TECHNOLOGY

ABOUT COMPANY

The Forest Company is the only member of STAFDA in Russia and a member of the ECOPAN International Association of Prefab Building And also we are certified partners of the Eurasian Pallet Association (EPAS) and more than once have become participants in international exhibitions. We have been developing rapidly since 1994, and these are 25 years of production experience; Over 600 items, and this is a chance to order all sorts of positions in one place and get the most favorable terms; Six-level quality control at each of the production stages, which excludes the possible defective products; Warehouses in the largest cities of Russia, with an area of 3,300m2 that enable us to store products in your nearest regions; The work of the centralized sales department for 11 hours a day for the convenience of ordering and receiving advice from experts at your convenience; 20,000 units of production per year; 15 cities with service centers throughout the Russian Federation with their own service engineer, who will not allow your production to stop owing to problems with pneumatic equipment; Own fleet of trucks consisting of 43 units of equipment that will promptly deliver your order on time; Sta of regional technical consultants on a specialized car, who will repair your instrument free

• f charge on site, as well as consult on building a pneumatic line.

ADVANTAGES OF FOREST PRODUCTS OUR MISSION: “To be a leader in the quality of support for pneumatic solutions to ensure uninterrupted production of partners!”

Forest products are manufactured using German production technology through which the company has achieved the highest quality of consumer properties; The fastener is made of high-quality and durable metal, which allows the use of fasteners when working with solid material; A uniform layer of zinc, which increases the resistance of the product to external factors (moisture, household chemicals); The special adhesive composition, which the fastener has been treated with, reliably fastens it with the material, and the optimal layer prevents clogging of the tool nose, thereby you save on unplanned purchase of spare parts and on the repair of the tool; The technology of fastener grinding ensures free passage through the material and reliable fastening of the materials being joined.

FASTENING TECHNOLOGY

Pneumatic Staplers

for Staples

_ 4 _ 6 _ 8 _ 10 _ 12 _ 14 _ 16

FASTENING TECHNOLOGY

PNEUMATIC STAPLER

type

INTENDED USE

• Upholstery work
• Decorative finish
• Drapery of fabrics

DESCRIPTION:

Lightweight tool with a compact body

provides more visibility when working in restricted spaces. The long handle

• f the instrument is comfortable even

for people with a wide palm. It is equipped with an additional silencer, and it works quietly and with little vibration. Convenient slider locking system, reliable latchsleeve spring. The tool has a window for controlling the loading of the magazine. Modern design and safe air circulation pattern. Due to the additional ring on the piston of antifriction material, this tool is less aected by “oil starvation”. The model is designed for intensive work in enterprises with a high production culture and wellprepared air.

Weight, kg 0.86 Working pressure, bar 4-6 Air consumption (at 6 bar) L/stapling 0.29 Fastener type Staple А Fastener length, mm 4-16 Staple width, mm 12.80 Wire section, mm 0.66x0.95

FASTENING TECHNOLOGY

PNEUMATIC STAPLER

type A

• Upholstery work
• For work in hard to reach places
• Decorative finish

INTENDED USE

DESCRIPTION:

1GP-A16LN50 upholstery pneumatic stapler is designed for intensive production with high-quality prepared air. The elongated nose part (50mm) allows you to work in niches and recesses. It is equipped with a rubber handle and a practical magazine fixation system. It works quietly and with little vibration. ADVANTAGES:

• 1. Elongated nose
• 2. Quiet, with low vibration
• 3. Convenient and simple design
• 4. Ability to work at low pressure

Weight, kg 0.94 Working pressure, bar 4-6 Air consumption (at 6 bar) L/stapling 0.4 Fastener type Staple А Fastener length, mm 4-16 Staple width, mm 12.80 Wire section, mm 0.66x0.95

PNEUMATIC STAPLER

type A

FASTENING TECHNOLOGY

INTENDED USE

• Upholstery work
• Decorative finish
• Drapery of fabrics

DESCRIPTION:

Yoshi 80/16 is a professional tool used by both small workshops and largefurniture factories. In this model, a lot of attention is paid to ergonomics and ease of the tool use, as professionals are very demanding in this matter. Simple and reliable design allows you to work in line with the frame tool, without pressure adjustments. But like most ones, this tool is demanding

• n the quality of service and

compressed air. ADVANTAGES:

• 1. Easy to operate
• 2. It can work in line with the frame

tool

• 3. High performance
• 4. Ergonomic

Weight, kg 0.95 Working pressure, bar 5-7 Air consumption (at 6 bar) L/stapling 0.3 Fastener type Staple А Fastener length, mm 4-16 Staple width, mm 12.80 Wire section, mm 0.66x0.95

PNEUMATIC STAPLER

FASTENING TECHNOLOGY

type A

• Upholstery work
• Decorative finish

INTENDED USE

DESCRIPTION:

Yoshi 8016А upholstery pneumatic stapler has an automatic stapling mode with adjustable speed driving. By pressing and holding the trigger

• n an air gun, you can execute up to

1,200 impacts per minute. The tool serves for upholstery work, drapery and decorative finish; it is used in large furniture factories. Exhaust air is exhausted through the back of the stapler handle, which eliminates the ingress of oil or water on the surfaces being joined. Yoshi 8016A is able to work in line with the frame tools. The trigger safety lock protects against accidental impact. Convenient magazine lock allows you to open the magazine and charge the staple in a split second. Rubber handle ensures comfortable

• peration.

ADVANTAGES:

• 1. Automatic operation
• 2. Easy to operate
• 3. Ergonomic shape
• 4. Fail-safe design

Weight, kg 0.9 Working pressure, bar 5-7 Air consumption (at 6 bar) L/stapling 0.3 Fastener type Staple А Fastener length, mm 4-16 Staple width, mm 12.80 Wire section, mm 0.66x0.95

type A

FASTENING TECHNOLOGY

PNEUMATIC STAPLER

• Upholstery work
• Decorative finish

INTENDED USE

DESCRIPTION:

LYoshi 8016А-LM upholstery

pneumatic stapler has an automatic stapling mode with adjustable speed

• driving. By pressing and holding the

trigger on an air gun, you can execute up to 1,200 impacts per minute. Due to the elongated magazine, which allows you to charge 250 staples, the time for reloading is reduced, and the tool productivity increases. The tool serves for upholstery work, drapery and decorative finish; it is used in large furniture factories. Exhaust air is exhausted through the back of the stapler handle, which eliminates the ingress of oil or water on the surfaces being joined. The trigger safety lock protects against accidental discharge. Convenient magazine lock allows you to open the magazine and charge the staple in a split second. Rubber handle ensures comfortable operation. ADVANTAGES:

• 1. Automatic operation
• 2. Easy to operate
• 3. Elongated magazine
• 4. Fail-safe design

Weight, kg 1.2 Working pressure, bar 5-7 Air consumption (at 6 bar) L/stapling 0.3 Fastener type Staple А Fastener length, mm 4-16 Staple width, mm 12.80 Wire section, mm 0.66x0.95

FASTENING TECHNOLOGY

type A

• Upholstered furniture

production

• For work in hard to reach places
• Decorative finish

INTENDED USE

PNEUMATIC STAPLER

DESCRIPTION:

LYoshi 8016-LN upholstery

pneumatic stapler is a professional tool, designed for intensive work in the furniture

• industry. Due to the longer nose part,

the tool is capable of driving staples in hard-to-reach places of the product, which significantly expands its scope. It features a well-assembled lightweight and compact body, as well as a large working resource. Capacious magazine allows you to charge up to 160 staples. The rubber handle will ensure comfortable functioning for a long time. The tool is delivered in a plastic case. ADVANTAGES:

• 1. Low weight
• 2. Elongated nose
• 3. Powerful
• 4. Simple and easy to operate

Weight, kg 0.98 Working pressure, bar 5-7 Air consumption (at 6 bar) L/stapling 0.4 Fastener type Staple А Fastener length, mm 6-16 Staple width, mm 12.80 Wire section, mm 0.66x0.95

FASTENING TECHNOLOGY

type L/LM

PNEUMATIC STAPLER Weight, kg 2.2 Working pressure, bar 5-8 Air consumption (at 7 bar) L/stapling 1.72 Fastener type Staple L/LM Fastener length, mm 19-50 Staple width, mm 10.70 Wire section, mm L -1.39x1.58 Wire section, mm LM -1.18x1.54

DESCRIPTION:

4C-L50 pneumatic stapler from Prebena, one of the most well-known companies in the pneumatics market. The lightweight tool has a driving depth adjustment, a wide range of fasteners used, and a safety lock against accidental discharge. We recommend it for use in intensive production with a heavy load on the tool. ADVANTAGES:

• 1. Protection against accidental

discharge

• 2. Convenient adjustment of driving

depth

• 3. Reliable, time-tested design
• 4. High performance
• Furniture production
• Bed frames
• Crates
• Roofing
• Wall covering
• Pallet fastening

INTENDED USE

PNEUMATIC STAPLER

FASTENING TECHNOLOGY

type L/LM

PNEUMATIC STAPLER

• Furniture production
• Bed frames
• Crates
• Roofing
• Wall covering
• Pallet fastening

INTENDED USE

Weight, kg 2.09 Working pressure, bar 5-8.3 Air consumption (at 7 bar) L/stapling 1.72 Fastener type Staple L/LM Fastener length, mm 15-40 Staple width, mm 10.70 Wire section, mm L -1.39x1.58 Wire section, mm LM -1.18x1.54

DESCRIPTION:

Modern premium tool. Reliable, wellthought-out design of the Yoshi S40N pneumatic tool dampens impact loads, while modern ergonomics reduce operator fatigue during operation. The use of quality materials allowed us to maximize the service schedule. The tool is designed for intensive production with a large amount of fasteners used. The tool is lightweight and compact, with a simple driving depth adjustment system. The gun is moderately demanding for air quality and service. We recommend it for large productions in the presence of high- quality prepared air. ADVANTAGES:

• 1. Screw-on striker increases tool

lifetime

• 2. The optimum ratio of weight and

dimensions allowed to reduce a recoil

• 3. Balanced center of gravity of the

tool minimizes the load on the user during

• peration
• 4. Reliable and lightweight design
• 5. High performance

FASTENING TECHNOLOGY

type L/LM

PNEUMATIC STAPLER

• Furniture production
• Bed frames
• Crates
• Roofing
• Wall covering
• Pallet fastening

INTENDED USE

Weight, kg 2.2 Working pressure, bar 5-8 Air consumption (at 7 bar) L/stapling 2.08 Fastener type Staple L/LM Fastener length, mm 19-50 Staple width, mm 10.70 Wire section, mm L -1.39x1.58 Wire section, mm LM -1.18x1.54

DESCRIPTION:

Modern premium tool. Reliable, wellthought-out design of the Yoshi S851N pneumatic tool dampens impact loads, while modern ergonomics reduce operator fatigue during operation. The use of quality materials allowed us to maximize the service schedule. The tool is designed for intensive production with a large amount of fasteners used. Lightweight and compact tool with a simple and intuitive system of the driving depth

• adjusting. The gun is moderately

demanding for air quality and service. We recommend it for large productions in the presence of highquality prepared air. ADVANTAGES:

• 1. Abrasion resistant nose insert
• 2. Convenient adjustment of driving

depth

• 3. Reliable and lightweight design
• 4. High performance

FASTENING TECHNOLOGY

type E

PNEUMATIC STAPLER

• Fastening lining, veneer,

fiberboard, OSB

• Parquetry and flooring
• Creating lightweight

loadcarrying structures

• Furniture assembly and repair

INTENDED USE

DESCRIPTION:

Prebena 3GP-E40 Professional frame tool for finishing work and furniture

• assembly. The tool is used for

fastening lining, veneer, fiberboard, and ОSB, parquetry and flooring, creating temporary and lightweight load-carryingstructures, as well as when assembling and repairing

• furniture. The lightweight and

compact body gives more visibility when working in restricted spaces. The pneumatic stapler gives the

• pportunity to work at low pressure

and, accordingly, save on the production of compressed air. A safety lock protects against accidental discharge. The tool is equipped with adjustable driving depth, which makes it possible to work with both soft and hard woods. The rotary deflector will allow you to adjust the exhaust air output. Small weight, simplicity of design, and ergonomic handle will ensure the user a comfortable work.

Weight, kg 1.83 Working pressure, bar 5-7 Air consumption (at 6 bar) L/stapling 1.28 Fastener type Staple E Fastener length, mm 15-40 Staple width, mm 5.70 Wire section, mm 1.00x1.25

FASTENING TECHNOLOGY

type E

PNEUMATIC STAPLER Weight, kg 1.35 Working pressure, bar 4.9-7.6 Air consumption (at 6 bar) L/stapling 1.7 Fastener type Staple E Fastener length, mm 16-40 Staple width, mm 5.70 Wire section, mm 1.00x1.25

• Fastening lining, veneer,

fiberboard, OSB

• Parquetry and flooring
• Creating lightweight

loadcarrying structures

• Furniture assembly and repair

INTENDED USE

DESCRIPTION:

Professional frame tool for finishing work and furniture assembly. The tool is used for fastening lining, veneer, fiberboard, and ОSB, parquetry and flooring, creating temporary and lightweight load-carrying structures, as well as when assembling and repairing

• furniture. The lightweight and compact

body gives more visibility when working in restricted spaces. The pneumatic stapler gives the

• pportunity to work at low pressure

and, accordingly, save on the production of compressed air. A safety lock protects against accidental discharge. The tool is equipped with adjustable driving depth, which makes it possible to work with both soft and hard woods. The rotary deflector will allow you to adjust the exhaust air output. Small weight, simplicity of design, and ergonomic handle will ensure the user a comfortable work.

FASTENING TECHNOLOGY

type ES

• Upholstery work
• Decorative finish

INTENDED USE

PNEUMATIC STAPLER

DESCRIPTION:

2P-ES40SDS pneumatic stapler is designed for intensive production with well-prepared compressed air. The thought-over design gives the chance to work with a high degree of intensity. It is characterized by increased service schedule for shock and damping parts. We recommend this tool for intensive furniture, tare or carpentry production with properly prepared air. ADVANTAGES:

• 1. Protection against accidental

discharge

• 2. Fail-safe design
• 3. High power
• 4. Easy to operate

Weight, kg 1.3 Working pressure, bar 5-7 Air consumption (at 6 bar) L/stapling 0.75 Fastener type Staple ES Fastener length, mm 15-40 Staple width, mm 5.95 Wire section, mm 0.83x1.08

FASTENING TECHNOLOGY

type H

PNEUMATIC STAPLER

• Furniture production
• Construction
• Repair and finishing work

INTENDED USE

DESCRIPTION:

Professional frame tool for fixing veneer and fiberboard (orgalite). The tool is used for assembling and repairing furniture, as well as in construction to create temporary and lightweight load-carrying structures. The lightweight and compact body gives more visibility when working in restricted spaces. The pneumatic stapler gives the opportunity to work at low pressure and, accordingly, save

• n the production of compressed air. A

safety lock protects against accidental

• discharge. The tool is equipped with

adjustable driving depth, which makes it possible to work with both soft and hard woods. The rotary deflector will allow you to adjust the exhaust air

• utput. Small weight, simplicity of

design, and ergonomic handle will ensure the user a comfortable work. ADVANTAGES:

• 1. Low weight
• 2. High operating speed
• 3. Contact safety lock
• 4. Driving depth adjustment

Weight, kg 2.0 Working pressure, bar 4.9-7.6 Air consumption (at 6 bar) L/stapling 1.72 Fastener type Staple H Fastener length, mm 16-40 Wire section, mm 1.00x1.25 S9240H

FASTENING TECHNOLOGY

type H

PNEUMATIC STAPLER

• Roofing
• Wall covering

INTENDED USE

Weight, kg 1.25 Working pressure, bar 5-7 Air consumption (at 6 bar) L/stapling 0.75 Fastener type Staple H Fastener length, mm 15-30 Fastener width, mm 8.6 Wire section, mm 1.00x1.25

DESCRIPTION:

Lightweight, compact pneumatic stapler with an elongated nose allows you to work in hard-to-reach places, in a very restricted space. It is perfect for roofing and installation of wooden floor walls. ADVANTAGES:

• 1. Low weight
• 2. High operating speed
• 3. Contact safety lock

FASTENING TECHNOLOGY

type WS

PNEUMATIC STAPLER

• Decorative finish
• Framing pictures
• Box fastening
• String fillet fastening
• Wooden elements fastening
• Furniture production

INTENDED USE

Weight, kg 2.6 Working pressure, bar 5-8 Air consumption (at 7 bar) L/stapling 1.36 Fastener type Staple WS Fastener length, mm 16-38 Staple width, mm 26.5 Wire section, mm 1.39x1.58

DESCRIPTION:

Professional tool for the production of packaging, construction and finishing

• works. The tool works with WS staple,

which wide back enables to firmly fix the soft material, but do not damage it. The tool is perfect for fixing corrugated cardboard to wood, heat insulating materials, soft tiles, and other types of

• roofing. Pneumatic stapler is

lightweight and well balanced; it works quietly and with little vibration. The contact safety lock protects against accidental discharge. Rotary deflector enables to adjust the exhaust air

• utlet. The design of the tool makes it

possible to clearly keep the angle of 90° when driving. Ergonomic rubber handle provides comfort while working. The tool is delivered in a metal case. Reference quality of German manufacturer. ADVANTAGES:

• 1. Low weight
• 2. Contact safety lock
• 3. Ergonomic handle

FASTENING TECHNOLOGY

type WS

Weight, kg 2.2 Working pressure, bar 5-8 Air consumption (at 7 bar) L/stapling 1.72 Fastener type Staple WS Fastener length, mm 19-40 Staple width, mm 26.5 Wire section, mm 1.39x1.58 PNEUMATIC STAPLER

• Production of containers
• Construction work

INTENDED USE

DESCRIPTION:

packaging, construction and finishing works. The pneumatic stapler works with WS staple, which wide back enables to firmly fix the soft material, but do not damage it. The tool is lightweight and compact, with a simple driving depth adjustment system. There is a switch from the contact stapling mode to the trigger one. Capacious magazine enables to load up to 150 staples. Rotary deflector enables to adjust the exhaust air outlet. Ergonomic rubber handle provides comfort while working. The contact safety lock protects against accidental discharge. The tool is delivered in a plastic case. ADVANTAGES:

• 1. Contact safety lock
• 2. Elongated magazine
• 3. Driving depth adjustment
• 4. Reliable and lightweight design
• 5. High performance

FASTENING TECHNOLOGY

type WN

SPECIAL PNEUMATIC TOOL

• Decorative finish
• Framing pictures
• Box fastening
• String fillet fastening
• Wooden elements fastening
• Furniture production

INTENDED USE

Weight, kg 2.4 Working pressure, bar 5-8 Air consumption (at 6 bar) L/stapling 1.65 Fastener type Staple WN Fastener length, mm 9-15 Staple width, mm 24.5 Wire section, mm 9-25

DESCRIPTION:

The tool is intended for splicing two or more pieces of wood into a single canvas, while it does not require the use of glue and press. The size of the fastener can be chosen for any thickness of wooden elements. The kinetic energy of the tool is enough to drive staples into hard wood and wood

• boards. Quality maintenance for this

tool is required. ADVANTAGES:

• 1. Fail-safe design
• 2. High power
• 3. Ease of operation

Pneumatic Staplers

for Packaging

FASTENING TECHNOLOGY

CARTON CLOSING STAPLER

• Stitching corrugated

cardboard boxes, bags, and

• ther types of packaging

INTENDED USE

Weight, kg 2.0 Working pressure, bar 5-7 Air consumption (at 6 bar) L/stapling 0.12 Fastener type Staple В Fastener length, mm 1 6-19 Fastener width, mm 34.55 Wire section, mm 0.86x2.25

DESCRIPTION:

Fail-safe design of KTVH-B19D tool has been tested at many packaging sites of enterprises, including at the conveyor production. KTVH-B19D pneumatic stapler has adjustment to the cardboard thickness and the staple length; there is a hole under the

• eyebolt. Convenient handle with

antifriction lining allows you to hold the tool at any angle. We recommend it for equipping packing areas with corrugated cardboard. ADVANTAGES:

• 1. Low compressed air consumption
• 2. Fail-safe design
• 3. Wide adjustments
• 4. High performance
• 5. Autonomy

type B

FASTENING TECHNOLOGY

type B

CARTON CLOSING STAPLER Weight, kg 2.1 Working pressure, bar 5-7 Air consumption (at 6 bar) L/stapling 0.12 Fastener type Staple В Fastener length, mm 19-22 Fastener width, mm 34.55 (19) 34.75 (22) Wire section, mm 0.86x2.25

• Stitching corrugated

cardboard boxes, bags, and

• ther types of packaging

INTENDED USE

DESCRIPTION:

Fail-safe design of KTVH-B22D has been tested at many packaging sites of enterprises, including at the conveyor

• production. KTVH-B22D pneumatic

stapler has adjustment to the cardboard thickness and the staple length; there is a hole under the

• eyebolt. Convenient handle with anti-

friction lining allows you to hold the tool at any angle. We recommend it for equipping packing areas with corrugated cardboard. ADVANTAGES:

• 1. Low compressed air consumption
• 2. Fail-safe design
• 3. Wide adjustments
• 4. High performance
• 5. Autonomy

FASTENING TECHNOLOGY

Weight, kg 2.65 Working pressure, bar 5-7 Air consumption (at 6 bar) L/stapling 1.1 Fastener type Staple В Fastener length, mm 1 6-19 Fastener width, mm 34.55 Wire section, mm 0.86x2.25 CARTON CLOSING STAPLER

• Stitching corrugated

cardboard boxes, bags, and

• ther types of packaging

INTENDED USE

DESCRIPTION:

Professional packaging tool. The pneumatic stapler has an adjustment for the staple length, cardboard thickness, as well as adjustment of the degree of the staple bend. Spacious magazine allows you to reload tool with staple less often. The pneumatic stapler dimensions –220x150x340mm. Noise level – 93 dB. ADVANTAGES:

• 1. Low compressed air consumption
• 2. Fail-safe design
• 3. High performance
• 4. Spacious magazine

type B

FASTENING TECHNOLOGY

type R

CARTON CLOSING STAPLER Weight, kg 2.65 Working pressure, bar 5-7 Air consumption (at 6 bar) L/stapling 1.1 Fastener type Staple R Fastener length, mm 15-18 Fastener width, mm 31.85 Wire section, mm 0.9x1.91

• Stitching corrugated

cardboard boxes, bags, and

• ther types of packaging

INTENDED USE

DESCRIPTION:

Professional packaging tool. The pneumatic stapler has an adjustment for the staple length, cardboard thickness, as well as adjustment of the degree of the staple bend. Spacious magazine allows you to reload tool with staple less often. The pneumatic stapler dimensions –

• 220x150x340mm. Noise level – 93 dB.

ADVANTAGES:

• 1. Low compressed air consumption
• 2. Fail-safe design
• 3. High performance
• 4. Spacious magazine

FASTENING TECHNOLOGY

type B

Weight, kg 1.7 Fastener type Staple В Fastener length, mm 1 6-19 Fastener width, mm 34.55 Wire section, mm 0.86x2.25 CARTON CLOSING STAPLER

• Stitching corrugated

cardboard boxes, bags, and

• ther types of packaging

INTENDED USE

DESCRIPTION:

Yoshi 35/19М mechanical packaging stapler is used to make boxes, cases, and lids of corrugated cardboard. The tool is equipped with an adjustment for the cardboard thickness, staple length, as well as adjustment of the degree of the staple bend. The stapler dimensions: 290x115x380mm. The magazine capacity – 100 staples. Simplicity and reliability of a design make it possible to work with the tool at rare maintenance. ADVANTAGES:

• 1. Autonomous
• 2. Ease of adjustment
• 3. Large magazine capacity
• 4. Fail-safe design

FASTENING TECHNOLOGY

type R

CARTON CLOSING STAPLER Weight, kg 1.7 Fastener type Staple R Fastener length, mm 15-18 Fastener width, mm 31.85 Wire section, mm 0.9x1.91

• Stitching corrugated

cardboard boxes, bags, and

• ther types of packaging

INTENDED USE

DESCRIPTION:

Yoshi 32/19М mechanical packaging stapler is used to make boxes, cases, and lids of corrugated cardboard. The tool is equipped with an adjustment for the cardboard thickness, staple length, as well as adjustment of the degree of the staple bend. The stapler dimensions: 290x115x380mm. The magazine capacity – 100 staples. Simplicity and reliability of a design make it possible to work with the tool at rare maintenance. ADVANTAGES:

• 1. Autonomous
• 2. Ease of adjustment
• 3. Large magazine capacity
• 4. Fail-safe design

FASTENING TECHNOLOGY

type B

Weight, kg 2.0 Fastener type Staple В Fastener length, mm 1 6-19 Fastener width, mm 34.55 Wire section, mm 0.86x2.25 CARTON CLOSING STAPLER

• Stitching corrugated

cardboard boxes, bags, and

• ther types of packaging

INTENDED USE

DESCRIPTION:

KTVH-В19Н carton closing stapler “manual” will allow you to work where there is no compressed air and

• electricity. The tool is easy to operate

and maintain. Long arm does not require much physical eort. We recommend it for production with an average intensity of work. ADVANTAGES:

• 1. Autonomous
• 2. Ease of adjustment
• 3. Large magazine capacity
• 4. Fail-safe design

Pneumatic Staplers

DIY-Series

Type А

INTENDED USE

DESCRIPTION:

The tool is designed to work in small workshops and for domestic use. It is equipped with a contact safety lock—a safety lock against accidental

• discharge. The 1XR-A16 pneumatic

stapler simple and clear to handle. It is recommended for workshops and home use, with medium and low tool loads. ADVANTAGES:

• 1. Protection against accidental

discharge

• 2. Lightweight design
• 3. High power
• 4. Easy maintenance

џ

Upholstery work

џ

Decorative finish

PREBENA 1ХR-А16 PNEUMATIC STAPLER Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Fastener type: Fastener length, mm:

_ 4 _ 6 _ 8 _ 10 _ 12 _ 14 _ 16

FASTENING TECHNOLOGY FASTENING TECHNOLOGY

0.75 4-7 0.3 Staple А 4-16

PREBENA 2XR-J50

Type J

INTENDED USE

DESCRIPTION:

The user needs to read the instruction manual. Wear goggles while working with the instrument, and in some cases, it is advisable to use ear protection. The supplied air should be dried and its pressure should not exceed the values stated in the instruction manual. The tool should be lubricated every shift before starting work or an adjusted lubricator should be used. The temperature of the supplied air should not be below 5°C.

џ

Eave fixing

џ

Facing work

џ

Arrangement of formwork

џ

Decorative finish

џ

Framing pictures

џ

Fastening of boxes, string fillets, wooden elements

џ

Furniture production

Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Fastener type: Fastener length, mm: FINISH NAILER

FASTENING TECHNOLOGY

1.3 5-7 0.75 Brad J 16-50

тип ES

INTENDED USE

DESCRIPTION:

The tool is designed to work in small workshops and for domestic use. The 2XR-ES40 pneumatic stapler is equipped with a contact safety lock—a safety lock against accidental

• discharge. It is simple and clear to
• handle. The tool is equipped with a

safety lock against accidental discharge, driving depth adjustment, convenient system of fastener replenishment, simple and clear to

• handle. It is recommended for

workshops and home use, with medium and low tool loads. ADVANTAGES:

• 1. Protection against accidental

discharge

• 2. Driving depth adjustment
• 3. Convenient system of fastener

replenishment

• 4. Easy maintenance

џ

Upholstery work

џ

Decorative finish

PREBENA 2XR-ES40 PNEUMATIC STAPLER Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Fastener type: Fastener length, mm:

FASTENING TECHNOLOGY FASTENING TECHNOLOGY

1.3 4-7 0.6 Staple ES 15-40

PREBENA DNPF16

Type PF/140

INTENDED USE

DESCRIPTION:

DNPF16 pneumatic stapler is the best acquisition for a home craftsman or small-scale production

• jobs. Due to its compactness and low

weight, it allows you to quickly and eciently perform fastening work. Ergonomic rubber handle ensures secure holding a stapler in your hand. The tool has a convenient button to fix the slider. Rotary deflector allows you to choose the direction of air

• utlet, which would be the most

comfortable for the user and others. For safety reasons, the instrument is equipped with a safety lock against accidental discharge. There is an inspection window to control magazine loading. The operating pressure is 4-7 bar, maximum one— 8.3 bar. It is recommended for workshops and home use, with medium and low tool loads. ADVANTAGES:

• 1. Contact safety lock
• 2. Convenient slider locking system
• 3. Rotary deflector
• 4. Rubber pad on the handle

џ

Upholstery work

џ

Decorative finish

џ

Fixing films

Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Fastener type: Fastener length, mm: PNEUMATIC STAPLER

_6 _16

FASTENING TECHNOLOGY

0.75 4-7 0.29 Staple PF/140 6-16

Pneumatic Nailers

for Pins & Brads

FASTENING TECHNOLOGY

type J

FINISH NAILER

INTENDED USE

• Decorative finish
• Framing pictures
• Box fastening
• String fillet fastening
• Wooden elements fastening
• Furniture production

Weight, kg 1.25 Working pressure, bar 5-7 Air consumption (at 6 bar) L/stapling 0.75 Fastener type Brad J Fastener length, mm 16-50 Wire section, mm 1.00x1.25

DESCRIPTION:

A tool for driving a brad J (18 GA) with a wide range by length. The tool is equipped with a safety lock against accidental discharge and a simple and clear system for replacing fasteners, without the need for adjustment along its length. The tool is reliable and easy

• touse. It is recommended to use this

tool in production with high intensity, highquality air, and regular maintenance.

FASTENING TECHNOLOGY

type J

Weight, kg 1.16 Working pressure, bar 5-8 Air consumption (at 6 bar) L/stapling 1.13 Fastener type Brad J Fastener length, mm 16-50 Wire section, mm 1.00x1.25 WINDOW FINISH NAILER

• Window production

INTENDED USE

DESCRIPTION:

The tool is made for nailing bead with a safety in the manufacture of wooden windows and doors. Prebena 2P-J50 SVN is equipped with a safety lock against accidental discharge and a simple and clear system for replacing fasteners, without the need for adjustment along its length. ADVANTAGES:

• 1. Driving depth adjustment
• 2. Protective cap against scratches

and dents

• 3. Blank-shot protection
• 4. The tool does not require

adjustments when switching to another fastener size

• 5. Rubber handle

PREBENA 2P-J50 SVN

• Door production

FASTENING TECHNOLOGY

type ES | J

SPECIAL PNEUMATIC TOOL

• Decorative finish
• Framing pictures
• Box fastening
• String fillet fastening
• Wooden elements fastening
• Furniture production

INTENDED USE

Weight, kg 1.5 Operating pressure, bar 5-7 Air consumption (at 6 bar) L/stapling 0.7 Fastener type Staple ES Fastener length, mm Staple 15-40 Staple width, mm 5.70 Fastener type Brad J Fastener length, mm Brad 19-40

DESCRIPTION:

This tool is able to drive in two diverse fasteners – staple and brad. To do this, the fastener loading and filing system was changed. The complicated brad feed system has become more demanding on the accuracy of the fastener dimensions. This model has been produced for several years and it has a reputation as a reliable tool for workshops and factories with a low intensity of tool use. ADVANTAGES:

• 1. Fail-safe design
• 2. Operational versatility
• 3. Ease of operation

FASTENING TECHNOLOGY

type J

Weight, kg 1.16 Working pressure, bar 5-8 Air consumption (at 6 bar) L/stapling 1.13 Fastener type Brad J Fastener length, mm 16-55 Wire section, mm 1.00x1.25 FINISH NAILER

• Window production
• Production of doors
• Production of upholstered and

cabinet furniture

• Decorative finish

INTENDED USE

DESCRIPTION:

Tool for driving brad with a wide range by length. The tool is equipped with a safety lock against accidental discharge and a simple and clear system for replacing fasteners, without the need for adjustment along its length. It is reliable and easy to use. It is recommended for use in production with high intensity, high- quality air, and routine maintenance. Yoshi FN1850 is equipped with a switch mode of theinstrument – it works as a queue and single fires. There are rotary deflector and driving depth adjustment. It is used to connect various elements and parts made of wood, as well as products from other materials whose density is equal to the density of wood. ADVANTAGES:

• 1. Driving depth adjustment
• 2. Protective cap against scratches

and dents

• 3. Blank-shot protection
• 4. The tool does not require

adjustments when switching to another fastener size

• 5. Rubber handle

PREBENA 3C-N65-S

Type N

INTENDED USE

DESCRIPTION:

A tool for driving a brad N (16 GA). The tool is equipped with a safety lock against accidental discharge and a simple and clear system for replacing fasteners, without the need for adjustment along its length. The tool is reliable and easy to use. It is recommended to use this tool in production with high intensity, high- quality air, and regular maintenance DESCRIPTION:

• 1. Reliable
• 2. Easy to operate
• 3. Safety lock against accidental

discharge

џ

Eave fixing

џ

Facing work

џ

Arrangement of formwork

џ

Decorative finish

џ

Framing pictures

џ

Fastening of boxes, string fillets, wooden elements

џ

Furniture production

Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Fastener type: Fastener length, mm: FINISH NAILER

_25 _65

FASTENING TECHNOLOGY

1.74 5-8 1.05 Brad N 25-65

FASTENING TECHNOLOGY

type AL

PNEUMATIC PINNER

• Decorative finish
• Framing pictures
• Box fastening
• String fillet fastening
• Wooden elements fastening
• Furniture production

INTENDED USE

Weight, kg 0.75 Working pressure, bar 4-7 Air consumption (at 6 bar) L/stapling 0.19 Fastener type Pin AL Fastener length, mm 12-35 Wire section, mm 0.64

DESCRIPTION:

The lightweight and compact tool for driving pin without head with a length

• f 12-35 mm. Despite the democratic

price, it has something in its arsenal that may not be in the more expensive

• copies. Convenient adjustment of

driving depth, blank-shot protection, a hook for carrying a tool on the belt—this is not a complete list of its

• advantages. The tool is recommended

for production with low load and careful handling of the tool. ADVANTAGES:

• 1. Low weight
• 2. High operating speed
• 3. Contact safety lock

FASTENING TECHNOLOGY

type AL | ALK

PNEUMATIC PINNER

• Decorative finish
• Framing pictures
• Box fastening
• String fillet fastening
• Wooden elements fastening
• Furniture production

INTENDED USE

DESCRIPTION:

The lightweight and compact tool for driving pin without head with a length

• f 12-35mm and pin with head with

0.64mm cross section The contact safety lock will protect against accidental discharge. It is reliable and easy to use. It is recommended for use in production with high intensity, highquality air, and routine

• maintenance. The tool does not require

adjustments when switching to another fastener size. The indicator enables to control the availability of fasteners in the magazine. The

• perating pressure range is 4-6 bar,

the maximum allowable pressure is 7 bar. ADVANTAGES:

• 1. Simple fastener loading system
• 2. Blank-shot protection
• 3. Low weight
• 4. Rubber handle

Weight, kg 0.98 Working pressure, bar 4-7 Air consumption (at 6 bar) L/stapling 0.36 Fastener type Pin without head AL Fastener length, mm 12-35 Wire section, mm 0.64 Fastener type Pin with head ALK Fastener length, mm 15-35 Wire section, mm 0.64

Pneumatic Nailers

for Nails

YOSHI CN-50 PNEUMATIC NAIL GUN

Type CNW

INTENDED USE

DESCRIPTION:

It is a compact tool for reliable nailing into any species of wood and wooden boards. Low air consumption of Yoshi CN-50 pneumatic tools does not make you think about purchasing a more efficient compressor. Low weight enables you to work intensively for a long time without using a balance

• beam. The body made of light alloys,

ergonomic shape of the handle and lining with damping and antifriction action, allow the user to not feel fatigue and discomfort during the

• peration. The Yoshi tool is a

champion in price/quality

• combination. It is recommended for

industries with high intensity use of pneumatic tools. ADVANTAGES:

• 1. Lightweight
• 2. Inexpensive
• 3. Powerful
• 4. Reliable

Dimensions, mm: Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Capacity of magazine, nails, pcs.: Fastener type: Rod diameter, mm: Rod length, mm:

џ

Frame house-building

џ

Fastening floorings

џ

Fastening covering

џ

Pallets and packing case assembly

_25 _55

FASTENING TECHNOLOGY FASTENING TECHNOLOGY

271х126х246 2 5-7 1.5 200-300 Nail CNW 2.1-2.3 25-55

_25 _57

PNEUMATIC NAIL GUN

Type CNW

INTENDED USE

DESCRIPTION:

It is a compact tool for reliable nailing into any species of wood and wooden

• boards. Low air consumption of Yoshi

CN-57 pneumatic tools does not make you think about purchasing a more ecient compressor. Low weight enables you to work intensively for a long time without using a balance beam. The body made of light alloys, ergonomic shape

• f the handle and lining with

damping and antifriction action, allow the user to not feel fatigue and discomfort during the operation. The Yoshi tool is a champion in price/quality combination. It is recommended for industries with high intensity use of pneumatic tools. ADVANTAGES:

• 1. Compact
• 2. Low air consumption
• 3. Lightweight
• 4. Sophisticated ergonomics
• 5. Favorable price/quality

combination

џ

Fastening floorings

џ

Fastening covering

џ

Pallets and packing case assembly

џ

House-building

YOSHI CN-57 Dimensions, mm: Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Capacity of magazine, nails, pcs.: Fastener type: Rod diameter, mm: Rod length, mm: 310x133x266 2.5 5-7 1.0 300-350 Nail CNW 2.1-2.5 25-57

FASTENING TECHNOLOGY

PNEUMATIC NAIL GUN

Type CNW

INTENDED USE

DESCRIPTION:

The Yoshi CN-70 pneumatic tool is interesting for its quality/price

• combination. The simplicity and

reliability of the design will be appreciated by those who are familiar with such a tool and technology, but the price of these qualities does not have to be high. The Yoshi CN-70 pneumatic tool is the choice of

• professionals. We recommend for

productions with a big intensity of use of the tool, with regular carrying

• ut the maintenance.

ADVANTAGES:

• 1. Lightweight
• 2. Inexpensive
• 3. Powerful
• 4. Reliable

Dimensions, mm: Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Capacity of magazine, nails, pcs.: Fastener type: Rod diameter, mm: Rod length, mm:

џ

Frame house-building

џ

Fastening floorings

џ

Fastening covering

џ

Pallets and packing case assembly

YOSHI CN-70

_45 _70

FASTENING TECHNOLOGY FASTENING TECHNOLOGY

335х130х310 3.5 5-7 1.5 250-300 Nail CNW 2.3-2.9 45-70

_50 _83

YOSHI CN-83

Type CNW

INTENDED USE

DESCRIPTION:

The Yoshi CN-83 pneumatic tool can be called a leader. High quality and reasonable cost allowed the tool to become the most popular among Russian pallet manufacturers. Fail- safe design ensures easy

• maintenance. It is recommended for

industries with high intensity use of pneumatic nail gun. ADVANTAGES:

• 1. Qualitative
• 2. Powerful
• 3. Unpretentious
• 4. Easy to maintain

џ

Frame house-building

џ

Fastening floorings

џ

Fastening covering

џ

Pallets and packing case assembly

PNEUMATIC NAIL GUN Dimensions, mm: Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Capacity of magazine, nails, pcs.: Fastener type: Rod diameter, mm: Rod length, mm:

FASTENING TECHNOLOGY

339х135х355 3.86 5-7 1.7 200-300 Nail CNW 2.5-3.3 50-83

_80 _90

YOSHI CN-90

Type CNW

INTENDED USE

DESCRIPTION:

Specialized model in the line of Yoshi

• tools. The tool is interesting in that

with small dimensions, it can hammer a nail with a large length and holding

• capacity. The size and weight of the

tool, due to the use of new technologies, remained as in the “younger” models. The size of a nail in the range of 80-90 mm is applied. The Yoshi CN-90 pneumatic tool is interesting for its quality/price

• combination. It is recommended for

industries with high intensity use of pneumatic tools. ADVANTAGES:

• 1. Compact
• 2. Powerful
• 3. Easy to maintain

Dimensions, mm: Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Capacity of magazine, nails, pcs.: Fastener type: Rod diameter, mm: Rod length, mm:

џ

Fastening floorings

џ

Pallets and packing case assembly

PNEUMATIC NAIL GUN

FASTENING TECHNOLOGY FASTENING TECHNOLOGY

339х135х355 3.86 5-7 1.7 200-300 Nail CNW 2.8-3.3 80-90

_45 _90

PREBENA 7F-CNW90-S20

Type CNW

INTENDED USE

DESCRIPTION:

The 7F-CNW90-S20 pneumatic stapler is a “universal soldier” in the nailer army. It has the largest possible range of nail lengths and diameters. The tool is able to perform a wide range of tasks. The shock power of 7F-CNW90-S20 will be enough to drive a 90 mm long nail into hard wood. Pledged delicacy will allow you to hammer a small nail without damaging the surface. It is recommended for industries that successfully use pneumatic tools, with well-prepared air and with the need to use dierent sizes of fasteners. ADVANTAGES:

• 1. Wide range of nail sizes
• 2. Driving depth adjustment
• 3. Simple and fail-safe design
• 4. Powerful

џ

Laying

џ

Pallets and packing case assembly and repair

PNEUMATIC NAIL GUN

FASTENING TECHNOLOGY

Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Capacity of magazine, nails, pcs.: Fastener type: Rod diameter, mm: Rod length, mm: 3.7 5-8 2.85 200-300 Nail CNW 2.5-3.1 45-90

YOSHI CN-100

Type CNW

INTENDED USE

DESCRIPTION:

The Yoshi CN-100 pneumatic tool is used in the manufacture of containers for valuable products, with increased requirements for bonding. The tool can be used when working with hardwoods. There will be no problems, because Yoshi CN-100 will always finish o the nail and solve all the tasks assigned to it ADVANTAGES:

• 1. Powerful
• 2. High firing rate

Dimensions, mm: Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Capacity of magazine, nails, pcs.: Fastener type: Rod diameter, mm: Rod length, mm:

џ

Laying

џ

Pallets and packing case assembly and repair

PNEUMATIC NAIL GUN

_55 _100

FASTENING TECHNOLOGY FASTENING TECHNOLOGY

404х137х367 5.7 5-8.3 3.15 200-300 Nail CNW 2.5-3.3 55-100

_90 _130

YOSHI CN-130

Type CNW

INTENDED USE

DESCRIPTION:

The Yoshi CN-130 pneumatic tool is used in the manufacture of large-size containers, with increased requirements for fastening. Pallets for bricks and other heavy goods, as well as large-sized drums, are products for which this tool is indispensable. The tool can be used when working with hardwoods—Yoshi CN-130 will always drive a nail in and solve all the tasks assigned to it. It is recommended to use the suspension to facilitate the work. ADVANTAGES:

• 1. Power to work with hardwood
• 2. High firing rate

џ

Laying

џ

Pallets and packing case assembly and repair

џ

Frame house-building

PNEUMATIC NAIL GUN Dimensions, mm: Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Capacity of magazine, nails, pcs.: Fastener type: Rod diameter, mm: Rod length, mm:

FASTENING TECHNOLOGY

467x156x338 6 5-8 3.2 200-300 Nail CNW 3.3-3.8 90-130

_25 _55

YOSHI CN-55 PRO

Type CNW

INTENDED USE

DESCRIPTION:

Yoshi CN-55 PRO pneumatic tool is included in the new line of professional tools Yoshi PRO. The tool

• ers the best price-quality ratio. It is

recommended for use in industries with small and medium intensity of use of the nailing tool, as well as for household use. ADVANTAGES:

• 1. Qualitative
• 2. Powerful
• 3. Unpretentious
• 4. Easy to maintain

Dimensions, mm: Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Capacity of magazine, nails, pcs.: Fastener type: Rod diameter, mm: Rod length, mm: PNEUMATIC NAIL GUN

џ

Frame house-building

џ

Fastening floorings

џ

Fastening covering

џ

Pallets and packing case assembly

FASTENING TECHNOLOGY FASTENING TECHNOLOGY

130х380х290 2.7 4.5-8.5 3.8 300-500 Nail CNW 2.1-2.5 25-55

_40 _70

YOSHI CN-70 PRO

Type CNW

INTENDED USE

DESCRIPTION:

Yoshi CN-70 PRO pneumatic tool is included in the new line of professional tools Yoshi PRO. The tool

• ers the best price-quality ratio. It is

recommended for use in industries with small and medium intensity of use of the nailing tool, as well as for household use. ADVANTAGES:

• 1. Qualitative
• 2. Powerful
• 3. Unpretentious
• 4. Easy to maintain

џ

Frame house-building

џ

Fastening floorings

џ

Fastening covering

џ

Pallets and packing case assembly

PNEUMATIC NAIL GUN Dimensions, mm: Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Capacity of magazine, nails, pcs.: Fastener type: Rod diameter, mm: Rod length, mm:

FASTENING TECHNOLOGY

132x320x332 3.7 5-8.3 3.8 225-300 Nail CNW 2.3-2.87 40-70

_50 _83

YOSHI CN-83 PRO

Type CNW

INTENDED USE

DESCRIPTION:

The Yoshi CN-83 pneumatic tool can be called a leader. High quality and reasonable cost allowed the tool to become the most popular among Russian pallet manufacturers. Fail- safe design ensures easy

• maintenance. It is recommended for

high intensity production using a pneumatic nail gun. ADVANTAGES:

• 1. Qualitative
• 2. Powerful
• 3. Unpretentious
• 4. Easy to maintain

Dimensions, mm: Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Capacity of magazine, nails, pcs.: Fastener type: Rod diameter, mm: Rod length, mm: PNEUMATIC NAIL GUN

џ

Frame house-building

џ

Fastening floorings

џ

Fastening covering

џ

Pallets and packing case assembly

FASTENING TECHNOLOGY FASTENING TECHNOLOGY

362х132х307 3.7 5-7 1.74 200-300 Nail CNW 2.5-3.3 50-83

PREBENA 7XR-RK90

Type RK/RKP

INTENDED USE

ADVANTAGES:

• 1. Ergonomic
• 2. Reliable
• 3. Lightweight
• 4. High bonding strength

џ

Laying

џ

Fastening crates

џ

Construction work

ROUND-HEAD STRIPNAILER Dimensions, mm: Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Capacity of magazine, nails, pcs.: Fastener type: Rod diameter, mm: Rod length, mm:

_50 _90

FASTENING TECHNOLOGY

530х110х370 3.2 4-7 2.0 50 Nail RK/RKP 2.8-3.1 50-90

PREBENA 10X-RK130

Type RK/RKP

DESCRIPTION:

10X-RK130 pneumatic stapler is used in wooden house-building. The tool is indispensable where high reliability of fasteners is required. Usually, when creating a container from several layers of wood, there is no possibility to escape from the bend, respectively, you have to use a long nail. In this case, 10X-RK130 will help you, with a nail length of up to 130 mm. ADVANTAGES:

• 1. Ergonomic
• 2. Reliable
• 3. High bonding strength

Dimensions, mm: Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Capacity of magazine, nails, pcs.: Fastener type: Rod diameter, mm: Rod length, mm: ROUND-HEAD STRIPNAILER

џ

Laying

џ

Fastening crates

џ

Construction work

џ

House-building

_90 _130

FASTENING TECHNOLOGY FASTENING TECHNOLOGY

553x175x478 6.1 5-8 5.33 50 Nail RK/RKP 3.4-4.2 90-130

INTENDED USE

PREBENA 10X-RK160

INTENDED USE

DESCRIPTION:

10X-RK160 pneumatic stapler is used in wooden house-building. The tool is indispensable where high reliability of fasteners is required. Usually, when creating a container from several layers of wood, there is no possibility to escape from the bend, respectively, you have to use a long nail. In this case, 10X-RK160 will help you, with a nail length of up to 160 mm. ADVANTAGES:

• 1. Ergonomic
• 2. Reliable
• 3. High bonding strength

џ

Fastening floorings

џ

Fastening crates

џ

Construction work

ROUND-HEAD STRIPNAILER Dimensions, mm: Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Capacity of magazine, nails, pcs.: Fastener type: Rod diameter, mm: Rod length, mm:

_100 _160

Type RK

FASTENING TECHNOLOGY

568x145x478 6.9 6-8 4.9 50 Nail RK 3.8-4.6 100-160

PREBENA 6X-PR90

Type D34

INTENDED USE

DESCRIPTION:

The tool body is made of light alloys. The gun is balanced for easy one- handed operation. Spikes in the bow allow you to shoot at an angle. When used, the tool does not subject the wood surface to chipping and

• damage. Reference quality of German

manufacturer. ADVANTAGES:

• 1. Lightweight
• 2. Ergonomic
• 3. Powerful

Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Capacity of magazine, nails, pcs.: Fastener type: Rod diameter, mm: Rod length, mm: Slope angle, degree: D-HEAD STRIPNAILER

џ

Wooden house-building

џ

Production of shields, boxes

_50 _90

FASTENING TECHNOLOGY FASTENING TECHNOLOGY

3.1 5-8 2.47 80 Nail D34 2.8-3.1 50-90 34

YOSHI D3490

Type D34

INTENDED USE

DESCRIPTION:

Professional nailer for shingle nails. The reinforced design of the shock and damping mechanism allows the tool to work in production with high intensity and hammer fasteners into hardwood and wood slabs. The body made of aluminum alloy protects the device from damage and extends its eective life. Ergonomic handle provides a comfortable grip, eliminates the slippage of the tool in

• hand. An adjustment of the driving

depth allows you to quickly switch from wooden boards to soft material. The switch gives you the opportunity to work as a queue and single

• impacts. For safety reasons, the tool

is equipped with a blank-shot protection ADVANTAGES:

• 1. Aluminum magazine
• 2. Protective cap against scratches

and dents

• 3. Notched contact safety lock
• 4. Rotary deflector
• 5. Round peen
• 6. Rubber handle
• 7. Blank-shot protection
• 8. Fast magazine recharge

џ

Packaging assembly

џ

Fastening crates

џ

Assembly of wooden structures in construction and production

D-HEAD STRIPNAILER Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Capacity of magazine, nails, pcs.: Fastener type: Rod diameter, mm: Rod length, mm: Slope angle, degree:

_50 _90

FASTENING TECHNOLOGY

3.85 5-8 5.2 70 Nail D34 2.8-3.8 50-90 34

YOSHI D34100

Type D34

INTENDED USE

DESCRIPTION:

Professional nailer for shingle nails. The reinforced design of the shock and damping mechanism allows the tool to work in production with high intensity and hammer fasteners into hardwood and wood slabs. The body made of aluminum alloy protects the device from damage and extends its eective life. Ergonomic handle provides a comfortable grip, eliminates the slippage of the tool in

• hand. Comfortable adjustment of the

driving depth allows you to quickly switch from wooden boards to soft

• material. The switch gives you the
• pportunity to work as a queue and

single impacts. For safety reasons, the tool is equipped with a blank- shot protection. ADVANTAGES:

• 1. Aluminum magazine
• 2. Protective cap against scratches

and dents

• 3. Notched contact safety lock
• 4. Rotary deflector
• 5. Round peen
• 6. Rubber handle
• 7. Blank-shot protection
• 8. Fast magazine recharge

D-HEAD STRIPNAILER

џ

Packaging assembly

џ

Fastening crates

џ

Assembly of wooden structures in construction and production

_50 _100

FASTENING TECHNOLOGY FASTENING TECHNOLOGY

Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Capacity of magazine, nails, pcs.: Fastener type: Rod diameter, mm: Rod length, mm: Slope angle, degree: 4.05 5-8 5.2 70 Nail D34 2.8-3.8 50-90 34

YOSHI JH3460

Type JH

INTENDED USE

DESCRIPTION:

In frame house-building, perforated plates are often used to fasten two or more elements in the structure. Due to the special design, the tool allows the plates to be fixed with a JH shingle nail without “aiming”. For convenience, the tool is equipped with a belt hook. Contact safety lock protects against accidental impact. The tool is equipped with a rotary deflector, which allows you to choose the most comfortable for the user and the surrounding direction of the air outlet. The gun has high power and excellent performance. ADVANTAGES:

• 1. Belt hook
• 2. Safety lock against accidental

discharge

• 3. Rotary deflector
• 4. Ergonomic handle

џ

Fastening crates

џ

Assembly of wooden structures in construction and production

џ

Mounting perforated corners

ROUND-HEAD STRIPNAILER Dimensions, mm: Weight, kg: Operating pressure, bar: Capacity of magazine, nails, pcs.: Fastener type: Rod diameter, mm: Rod length, mm: Slope angle, degree:

_40 _60

FASTENING TECHNOLOGY

307х109х359 2.5 4.9-8.3 30 Nail Jh 4 40-60 34

YOSHI CRN45

Type CRN

INTENDED USE

DESCRIPTION:

With the help of the Yoshi CRN45 roofing tool, the installation time for soft roofing is reduced by more than 3 times. The tool is specially designed for quick installation of soft roofing, lightweight and well balanced, which provides maximum comfort to the

• worker. Roofing nails have a special

coating—zinc. It is recommended for consumers with high usage rates ADVANTAGES:

• 1. One of the most powerful tools for

fixing soft roofing on the Russian market.

• 2. Contact safety lock.
• 3. On the nose there are special guide

jaws for centering the nail in the barrel.

• 4. All-metal nose; no fragile plastic

parts.

• 5. It comes in a plastic case for easy

carrying and storage.

• 6. It is equipped with a lubricator and

safety glasses.

Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Capacity of magazine, nails, pcs.: Fastener type: Rod diameter, mm: Rod length, mm: Head diameter, mm: ROOFING NAILER

џ

Mounting of soft roofing, insulation

џ

Fixing sheet materials, siding, etc.

_19 _45

FASTENING TECHNOLOGY FASTENING TECHNOLOGY

2.2 5-8 0.92 120 Nail CRN 3.0-3.1 19-45 10

PREBENA 4X-CNZ45

Type CRN

INTENDED USE

DESCRIPTION:

With the help of the Prebena 4X- CNZ45 roofing tool, the installation time for soft roofing is reduced by more than 3 times. The tool is specially designed for quick installation of soft roofing, lightweight and well balanced, which provides maximum comfort to the

• worker. Roofing nails have a special

coating—zinc. It is recommended for consumers with high usage rates. ADVANTAGES:

• 1. Innovative fast-charging system
• 2. Contact safety lock
• 3. Single and automatic impact
• 4. Rubber sidewalls
• 5. It comes in a metal case for easy

carrying and storage.

• 6. It is equipped with a lubricator and

safety glasses.

• 7. Driving depth adjustment
• 8. Adjustable exhaust
• 9. Stand under the magazine for a

direct impact

џ

Mounting of soft roofing, insulation

џ

Fixing sheet materials, siding, etc.

Weight, kg: Operating pressure, bar: Air consumption (at 6 bar) L/stapling: Capacity of magazine, nails, pcs.: Fastener type: Rod diameter, mm: Rod length, mm: Head diameter, mm: ROOFING NAILER

_19 _45

FASTENING TECHNOLOGY

2.2 5-8 1.7 120 Nail CRN 3.0-3.1 19-45 10

Type CP

INTENDED USE

DESCRIPTION:

Finishing work: for fastening wood, wood-based panels and metal profiles to concrete, cellular concrete,

• brickwork. Electrical installation work:

the tool allows you to make a quick installation of clips for corrugated PVC pipes and perforated metal tape. ADVANTAGES:

• 1. 360 rotation of the deflector
• 2. Aluminum body
• 3. Rubber handle
• 4. Nose latch for nail removal
• 5. Selector trigger

Dimensions, mm: Weight, kg: Operating pressure, bar: Capacity of magazine, nails, pcs.: Fastener type: Rod diameter, mm: Rod length, mm:

џ

Finishing work

џ

Electrical installation work

YOSHI ST3040 CONSTRUCTION PNEUMATIC GUN

_12 _40

FASTENING TECHNOLOGY FASTENING TECHNOLOGY

288x96x351 2.55 4.9-8.3 32 Nail СР 2.6-3.0 12-40

Other instrumets

FASTENING TECHNOLOGY

Weight, kg 1.2 Working pressure, bar 3-7 Air consumption (at 6 bar) L/stapling 500 Rotation rate, rpm 1,730 Drill diameter, mm 1.5-10 Reversing gear Yes AIR DRILL

DESCRIPTION:

Yoshi D817 air drill is one of the most common tools. Compact housing provides the ability to use the tool in hard-to-reach places. The drill has high torque and reversing gear. We recommend it for furniture, joinery, and many other industries. ADVANTAGES:

• 1. High torque
• 2. Compact size
• 3. Easy to operate
• 4. There is a reversing gear
• Furniture production and

joinery

INTENDED USE

FASTENING TECHNOLOGY

Weight, kg 1.06 Working pressure, bar 3-7 Air consumption (at 6 bar) L/stapling 500 Rotation rate, rpm 1,730 Drill diameter, mm 1-10 Quick-lock chuck Yes Reversing gear Yes

DESCRIPTION:

A quick-lock chuck of Yoshi D817 KL air drill makes it easy to replace the drill

• bit. Compact housing provides the

ability to use the tool in a restricted space, while high torque enables the hardest materials to be processed. The reversing gear makes this model even more attractive. ADVANTAGES:

• 1. High torque
• 2. Compact size
• 3. Quick-lock chuck
• 4. Reversing gear
• Furniture production and

joinery

INTENDED USE

AIR DRILL

FASTENING TECHNOLOGY

Weight, kg 1.4 Working pressure, bar 3-7 Air consumption (at 6 bar) L/stapling 480 Rotation rate, rpm 750 Drill diameter, mm 1.5-13 Reversing gear Yes AIR DRILL

DESCRIPTION:

In D819 drill, an additional gearbox, which reduces the rotation rate and increases the power with the standard consumption of compressed air, is

• used. This allowed the use of larger

diameter drills and machining of harder

• materials. Having an additional handle

will allow you to better orient and hold the drill. ADVANTAGES:

• 1. Increased torque
• 2. Reinforced chuck
• 3. Additional handle
• 4. Compact size
• 5. Reversing gear
• Furniture production and

joinery

INTENDED USE

FASTENING TECHNOLOGY

Weight, kg 1.4 Working pressure, bar 3-7 Air consumption (at 6 bar) L/stapling 480 Rotation rate, rpm 750 Drill diameter, mm 1.5-13 Quick-lock chuck Yes Reversing gear Yes

DESCRIPTION:

In Yoshi D819 KL drill, an additional gearbox, which reduces the rotation rate and increases the power with the standard consumption of compressed air, is used. This allowed the use of larger diameter drills and machining of harder materials. A quick-lock chuck of Yoshi D819 KL air drill makes it easy to replace the drill bit. Having an additional handle will allow you to better orient and hold the drill. The air drill is lightweight—only 1.4kg, which ensures maximum usability of this tool. Yoshi D819 KL air drill is suitable for work with virtually any material of varying degree of firmness. The drill has high torque and reversing

• gear. We recommend it for furniture,

joinery, and many other industries. ADVANTAGES:

• 1. High torque
• 2. Compact size
• 3. Reversing gear
• 4. Additional handle
• 5. Quick-lock chuck
• Furniture production and

joinery

INTENDED USE

AIR DRILL

FASTENING TECHNOLOGY

Weight, kg 1.1 Working pressure, bar 3-7 Air consumption (at 6 bar) L/stapling 500 Rotation rate, rpm 1.800 Bat size, mm 6 Reversing gear Yes PNEUMATIC SCREWDRIVER

DESCRIPTION:

This is a gun-type pneumatic screwdriver, the most common design

• f pneumatic screwdriver with

reversing gear and overload-release

• clutch. The tightening torque

adjustment is implemented in this model. ADVANTAGES:

• 1. Tightening torque adjustment
• 2. Easy to operate
• 3. Fail-safe design
• 4. Reversing gear
• Furniture production and

joinery

INTENDED USE

FASTENING TECHNOLOGY

PNEUMATIC SCREWDRIVER Weight, kg 1.3 Working pressure, bar 3-7 Air consumption (at 6 bar) L/stapling 480 Rotation rate, rpm 800 Bat size, mm 6 Reversing gear Yes

DESCRIPTION:

This is a gun-type pneumatic screwdriver, the most common design

• f pneumatic screwdriver with

reversing gear and overload-release

• clutch. The tightening torque

adjustment is implemented in this model. ADVANTAGES:

• 1. Tightening torque adjustment
• 2. Easy to operate
• 3. Fail-safe design
• 4. Reversing gear
• Furniture production and

joinery

INTENDED USE

FASTENING TECHNOLOGY

Weight, kg 1.8 Battery capacity 1.3 A·h Battery voltage 18 V Battery type Lithium-ion Maximum torque 29 N·m Capacity of magazine, screws 50 pcs. Fastener type Screw CSP Diameter, mm 3.5-4.2 Length, mm 22-55

DESCRIPTION:

NOVA Plus 5805L screwdriver with automatic feed fasteners is designed for tightening screws and self-tapping screws in the tape. It is used for highspeed and high-quality installation

• f plasterboard to profiles of metal and

wood, as well as the assembly of wooden structures. ADVANTAGES:

• 1. Battery 18V 1,3A·h Li-ION
• 2. Mains charger (220V)
• 3. 154mm bat
• 4. Instruction
• 5. Case

CORDLESS SCREWDRIVER

• For a large amount of

assembly operations for plasterboard floors

INTENDED USE

FASTENING TECHNOLOGY

HAND TACKER

type PF/140

• Cloth upholstery of furniture

and interior elements

• Roofing
• Fixing films and membranes

to wood in construction

• Greenhouse arrangement
• Fixing paper and film

advertising

INTENDED USE

DESCRIPTION:

The hand tacker for PF staple has a simple and reliable design that has been tested by more than one thousand demanding users. The kinetic energy of this tool allows you to attach fabric, films, membranes, and thin roofing material to wood and solid wood-based panels (wood chipboard,

• riented strand board (OSB)). The

resource, incorporated in this tool, will satisfy any professional. ADVANTAGES:

• 1. Fail-safe design
• 2. High power
• 3. Ease of operation

Weight, kg 0.85 Fastener type Staple PF/140 Fastener length, mm 6-14 Fastener width, mm 10.55 Wire section, mm 0.5x1.25

FASTENING TECHNOLOGY

HAND TACKER

type 53

• Cloth upholstery of furniture

and interior elements

• Roofing
• Fixing films and membranes

to wood in construction

• Greenhouse arrangement
• Fixing paper and film

advertising

INTENDED USE

DESCRIPTION:

Professional mechanical stapler for staples with a cross section of 0.7mm and a back width of 10.6 to 13.0mm. The simplicity of the design and allmetal body ensures the tool

• durability. The magazine is equipped

with a captive slider for comfortable

• work. A foldable self-locking handle will

save space. The sophisticated shock spring design reduces the user load. It is a trouble-free tool for comfortable

• peration.

ADVANTAGES:

• 1. All-metal body
• 2. Captive magazine
• 3. Foldable self-locking handle
• 4. Simple fastener loading system
• 5. Low weight
• 6. Autonomy

Weight, kg 0.85 Fastener type Staple 53 Fastener length, mm 6-12 Fastener width, mm 11.4 Wire section, mm 0.58x0.7

FASTENING TECHNOLOGY

STAPLER GUN

type PF/140

• Roofing
• Fixing films and membranes

to wood in construction

• Greenhouse arrangement
• Fixing paper and film

advertising

INTENDED USE

DESCRIPTION:

The hand tacker for PF staple has a simple and reliable design that has been tested by more than one thousand demanding users. The kinetic energy of this tool allows you to attach fabric, films, membranes, and thin roofing material to wood and solid wood-based panels (wood chipboard,

• riented strand board (OSB)). The

stapler mechanism makes it possible to quickly drive a large number of fasteners with a large area coverage. ADVANTAGES:

• 1. Fail-safe design
• 2. High power
• 3. Ease of operation

Weight, kg 0.9 Fastener type Staple PF/140 Fastener length, mm 6-9 Fastener width, mm 10.55 Wire section, mm 0.5x1.25

FASTENING TECHNOLOGY

STAPLE REMOVER

type 53/140/PF/A/D

• Removing staples

INTENDED USE

DESCRIPTION:

The Yoshi SR/16 staple remover is intended for removing staples of small

• section. The metal housing design has

great strength and durability. The handle of the staple remover is made

• f ABS plastic and it has ribbed relief

for reliable fixation of the tool in the

• perator’s hand. The working part of

the tool has a reinforced design and a retainer for accurate work without material damage.

Weight, kg 0.134 Fastener type Staple 53, 140, PF, A, D