AT-1500 TEST REPORT Test Report # Company: Numo Manufacturing - - PDF document

▶
at 1500 test report test report company numo
SMART_READER_LITE
LIVE PREVIEW

AT-1500 TEST REPORT Test Report # Company: Numo Manufacturing - - PDF document

Oct 13, 2022 32 likes •132 views

AT-1500 TEST REPORT Test Report # Company: Numo Manufacturing 11H-2708 Recipient: Chris Van Meter Date of Issue: November 15, 2011 Recipient Email: cvanmeter@numomfg.com Pages: Page 1 of 10 cc to Email: - Date Received: November 10,

slide-1
SLIDE 1

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited. # Test is not covered under ACLASS (Certificate # AT‐1500) accredited listed scope. ACLASS is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

TEST REPORT

Company: Numo Manufacturing

Test Report #

11H-2708 Recipient: Chris Van Meter Date of Issue: November 15, 2011 Recipient Email: cvanmeter@numomfg.com Pages: Page 1 of 10 cc to Email:

  • Date Received:

November 10, 2011

ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 38-42 Kwai Fung Crescent, Kwai Chung N.T., Hong Kong Tel: 852-3185 8000 Fax: 852-3572 0374 ansecogroup.com

AT-1500

110804 CS-HK-F024

SAMPLE I NFORMATI ON:

Description:

Zipper Chains and Slides

Assortment:

  • Purchase Order Number:
  • SKU/style No.:
  • Toy Co./Agency:
  • Factory/Supplier:
  • Country of Origin:
  • Country of Distribution:
  • Labeled Age Grade:
  • Quantity Submitted:

1 Lot Recommended Age Grade:

  • Testing Period:

11/10/2011 – 11/15/2011 Tested Age Grade:

  • OVERALL RESULT:

PASS

At the request of the client, the following tests were conducted:

CONCLUSI ON TEST(S) CONDUCTED

PASS CPSIA Section 101 & 16 CFR 1303, Total Lead Content in Paints & Surface Coatings PASS CPSIA Section 101, Total Lead Content in Substrate Materials PASS Client Requirement, Total Cadmium Content in Paints & Surface Coatings PASS Client Requirement, Total Cadmium Content in Substrate Materials PASS CPSIA Section 108, Phthalates Content – Mouthable (DBP, BBP, DEHP, DnOP, DINP, DIDP) PASS California Proposition 65, Phthalates Content (DEHP, DBP, BBP, DIDP, DnHP) ANSECO GROUP (HK) LIMITED Vincent Chow Wai Kit Assistant Manager, Chemical Laboratory

slide-2
SLIDE 2

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited. # Test is not covered under ACLASS (Certificate # AT‐1500) accredited listed scope. ACLASS is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

TEST REPORT

Company: Numo Manufacturing

Test Report #

11H-2708 Recipient: Chris Van Meter Date of Issue: November 15, 2011 Recipient Email: cvanmeter@numomfg.com Pages: Page 2 of 10 cc to Email:

  • Date Received:

November 10, 2011

ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 38-42 Kwai Fung Crescent, Kwai Chung N.T., Hong Kong Tel: 852-3185 8000 Fax: 852-3572 0374 ansecogroup.com

AT-1500

110804 CS-HK-F024

DETAI LED RESULTS: CPSI A Section 101 & 16 CFR 1303, Total Lead Content in Paints & Surface Coatings

Analysis performed by Inductively Coupled Plasma Spectroscopy to determine compliance with the above referenced regulations. [Referenced Test Method: CPSC-CH-E-1003-09] Specimen No. 1 2 3 4

  • Limit

Test Item Result (mg/kg) Result (mg/kg) Result (mg/kg) Result (mg/kg) Result (mg/kg)

Total (mg/ kg)

Total Pb < 5 6 < 5 < 5

  • 90

Conclusion

PASS PASS PASS PASS

  • Note:

Pb = Lead mg/kg = Milligram per kilogram < = Less than

slide-3
SLIDE 3

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited. # Test is not covered under ACLASS (Certificate # AT‐1500) accredited listed scope. ACLASS is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

TEST REPORT

Company: Numo Manufacturing

Test Report #

11H-2708 Recipient: Chris Van Meter Date of Issue: November 15, 2011 Recipient Email: cvanmeter@numomfg.com Pages: Page 3 of 10 cc to Email:

  • Date Received:

November 10, 2011

ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 38-42 Kwai Fung Crescent, Kwai Chung N.T., Hong Kong Tel: 852-3185 8000 Fax: 852-3572 0374 ansecogroup.com

AT-1500

110804 CS-HK-F024

DETAI LED RESULTS: Client Requirement, Total Cadmium Content in Paints & Surface Coatings

Analysis performed by Inductively Coupled Plasma Spectroscopy to determine compliance with the above referenced regulations. [Referenced Test Method: CPSC-CH-E-1003-09] Specimen No. 1 2 3 4

  • Limit

Test Item Result (mg/kg) Result (mg/kg) Result (mg/kg) Result (mg/kg) Result (mg/kg)

Total (mg/ kg)

Total Cd < 5 < 5 < 5 < 5

  • 40

Conclusion

PASS PASS PASS PASS

  • Note:

Cd = Cadmium mg/kg = Milligram per kilogram < = Less than

slide-4
SLIDE 4

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited. # Test is not covered under ACLASS (Certificate # AT‐1500) accredited listed scope. ACLASS is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

TEST REPORT

Company: Numo Manufacturing

Test Report #

11H-2708 Recipient: Chris Van Meter Date of Issue: November 15, 2011 Recipient Email: cvanmeter@numomfg.com Pages: Page 4 of 10 cc to Email:

  • Date Received:

November 10, 2011

ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 38-42 Kwai Fung Crescent, Kwai Chung N.T., Hong Kong Tel: 852-3185 8000 Fax: 852-3572 0374 ansecogroup.com

AT-1500

110804 CS-HK-F024

DETAI LED RESULTS: CPSI A Section 101, Total Lead Content in Substrate Materials

Analysis performed by Inductively Coupled Plasma Spectroscopy to determine compliance with the above referenced regulation. [Referenced Test Method: CPSC-CH-E1001-08.1 (Metal) and CPSC-CH-E1002-08.1 (Non-Metal)] Specimen No. 5 6 7 8 9

Limit

Test Item Result (mg/kg) Result (mg/kg) Result (mg/kg) Result (mg/kg) Result (mg/kg)

Total (mg/ kg)

Total Pb < 5 < 5 < 5 < 5 < 5

100 Conclusion

PASS PASS PASS PASS PASS Specimen No. 10 11 12+ 13 14+ 15 16+ 17

Limit

Test Item Result (mg/kg) Result (mg/kg) Result (mg/kg) Result (mg/kg) Result (mg/kg)

Total (mg/ kg)

Total Pb < 5 < 5 < 5 40 50

100 Conclusion

PASS PASS PASS PASS PASS Specimen No. 18+ 19 20 21+ 22 23 24+ 25

Limit

Test Item Result (mg/kg) Result (mg/kg) Result (mg/kg) Result (mg/kg) Result (mg/kg)

Total (mg/ kg)

Total Pb 40 < 5 79 < 5 73

100 Conclusion

PASS PASS PASS PASS PASS Specimen No. 26+ 27

  • Limit

Test Item Result (mg/kg) Result (mg/kg) Result (mg/kg) Result (mg/kg) Result (mg/kg)

Total (mg/ kg)

Total Pb 72

  • 100

Conclusion

PASS

  • Note:

Pb = Lead mg/kg = Milligram per kilogram < = Less than

slide-5
SLIDE 5

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited. # Test is not covered under ACLASS (Certificate # AT‐1500) accredited listed scope. ACLASS is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

TEST REPORT

Company: Numo Manufacturing

Test Report #

11H-2708 Recipient: Chris Van Meter Date of Issue: November 15, 2011 Recipient Email: cvanmeter@numomfg.com Pages: Page 5 of 10 cc to Email:

  • Date Received:

November 10, 2011

ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 38-42 Kwai Fung Crescent, Kwai Chung N.T., Hong Kong Tel: 852-3185 8000 Fax: 852-3572 0374 ansecogroup.com

AT-1500

110804 CS-HK-F024

DETAI LED RESULTS: Client Requirement, Total Cadmium Content in Substrate Materials

Analysis performed by Inductively Coupled Plasma Spectroscopy to determine compliance with the above referenced regulation. [Referenced Test Method: CPSC-CH-E1001-08.1 (Metal) and CPSC-CH-E1002-08.1 (Non-Metal)] Specimen No. 5 6 7 8 9

Limit

Test Item Result (mg/kg) Result (mg/kg) Result (mg/kg) Result (mg/kg) Result (mg/kg)

Total (mg/ kg)

Total Cd < 5 < 5 < 5 < 5 < 5

40 Conclusion

PASS PASS PASS PASS PASS Specimen No. 10 11 12+ 13 14+ 15 16+ 17

Limit

Test Item Result (mg/kg) Result (mg/kg) Result (mg/kg) Result (mg/kg) Result (mg/kg)

Total (mg/ kg)

Total Cd < 5 < 5 < 5 < 5 < 5

40 Conclusion

PASS PASS PASS PASS PASS Specimen No. 18+ 19 20 21+ 22 23 24+ 25

Limit

Test Item Result (mg/kg) Result (mg/kg) Result (mg/kg) Result (mg/kg) Result (mg/kg)

Total (mg/ kg)

Total Cd 10 < 5 17 < 5 5

40 Conclusion

PASS PASS PASS PASS PASS Specimen No. 26+ 27

  • Limit

Test Item Result (mg/kg) Result (mg/kg) Result (mg/kg) Result (mg/kg) Result (mg/kg)

Total (mg/ kg)

Total Cd < 5

  • 40

Conclusion

PASS

  • Note:

Cd = Cadmium mg/kg = Milligram per kilogram < = Less than

slide-6
SLIDE 6

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited. # Test is not covered under ACLASS (Certificate # AT‐1500) accredited listed scope. ACLASS is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

TEST REPORT

Company: Numo Manufacturing

Test Report #

11H-2708 Recipient: Chris Van Meter Date of Issue: November 15, 2011 Recipient Email: cvanmeter@numomfg.com Pages: Page 6 of 10 cc to Email:

  • Date Received:

November 10, 2011

ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 38-42 Kwai Fung Crescent, Kwai Chung N.T., Hong Kong Tel: 852-3185 8000 Fax: 852-3572 0374 ansecogroup.com

AT-1500

110804 CS-HK-F024

DETAI LED RESULTS: CPSI A Section 108, Phthalates Content – Mouthable (DBP, BBP, DEHP, DnOP, DI NP, DI DP)

Analysis performed by Gas Chromatography/Mass Spectrometry to determine compliance with the above referenced regulation. [Referenced Test Method: CPSC-CH-C1001-09.3] Specimen No. 5 6 7 8 9

Limit

Test Item Result (% w/w) Result (% w/w) Result (% w/w) Result (% w/w) Result (% w/w)

(% w/ w)

DBP < 0.01 < 0.01 < 0.01 < 0.01 < 0.01

0.1

BBP < 0.01 < 0.01 < 0.01 < 0.01 < 0.01

0.1

DEHP < 0.01 < 0.01 < 0.01 < 0.01 < 0.01

0.1

DnOP < 0.01 < 0.01 < 0.01 < 0.01 < 0.01

0.1

DINP < 0.01 < 0.01 < 0.01 < 0.01 < 0.01

0.1

DIDP < 0.01 < 0.01 < 0.01 < 0.01 < 0.01

0.1 Conclusion

PASS PASS PASS PASS PASS Specimen No. 10 11

  • Limit

Test Item Result (% w/w) Result (% w/w) Result (% w/w) Result (% w/w) Result (% w/w)

(% w/ w)

DBP < 0.01 < 0.01

  • 0.1

BBP < 0.01 < 0.01

  • 0.1

DEHP < 0.01 < 0.01

  • 0.1

DnOP < 0.01 < 0.01

  • 0.1

DINP < 0.01 < 0.01

  • 0.1

DIDP < 0.01 < 0.01

  • 0.1

Conclusion

PASS PASS

  • Note:

DBP = Dibutyl phthalate; BBP = Benzyl butyl phthalate; DEHP = Di-(2-ethylhexyl) phthalate DnOP = Di-n-octyl phthalate; DINP = Diisononyl phthalate; DIDP = Diisodecyl phthalate % w/w = Percentage by weight < = Less than

slide-7
SLIDE 7

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited. # Test is not covered under ACLASS (Certificate # AT‐1500) accredited listed scope. ACLASS is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

TEST REPORT

Company: Numo Manufacturing

Test Report #

11H-2708 Recipient: Chris Van Meter Date of Issue: November 15, 2011 Recipient Email: cvanmeter@numomfg.com Pages: Page 7 of 10 cc to Email:

  • Date Received:

November 10, 2011

ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 38-42 Kwai Fung Crescent, Kwai Chung N.T., Hong Kong Tel: 852-3185 8000 Fax: 852-3572 0374 ansecogroup.com

AT-1500

110804 CS-HK-F024

DETAI LED RESULTS: California Proposition 65, Phthalates Content (DEHP, DBP, BBP, DI DP, DnHP)

Analysis performed by Gas Chromatography/Mass Spectrometry to determine compliance with the above referenced regulation. [Referenced Test Method: CPSC-CH-C1001-09.3] Specimen No. 5 6 7 8 9

Limit

Test Item Result (% w/w) Result (% w/w) Result (% w/w) Result (% w/w) Result (% w/w)

Total (% w/ w)

DBP < 0.01 < 0.01 < 0.01 < 0.01 < 0.01

0.1

BBP < 0.01 < 0.01 < 0.01 < 0.01 < 0.01

0.1

DEHP < 0.01 < 0.01 < 0.01 < 0.01 < 0.01

0.1

DIDP < 0.01 < 0.01 < 0.01 < 0.01 < 0.01

0.1

DnHP# < 0.01 < 0.01 < 0.01 < 0.01 < 0.01

0.1 Conclusion

PASS PASS PASS PASS PASS Specimen No. 10 11

  • Limit

Test Item Result (% w/w) Result (% w/w) Result (% w/w) Result (% w/w) Result (% w/w)

Total (% w/ w)

DBP < 0.01 < 0.01

  • 0.1

BBP < 0.01 < 0.01

  • 0.1

DEHP < 0.01 < 0.01

  • 0.1

DIDP < 0.01 < 0.01

  • 0.1

DnHP# < 0.01 < 0.01

  • 0.1

Conclusion

PASS PASS

  • Note:

DBP = Dibutyl phthalate; BBP = Benzyl butyl phthalate; DEHP = Di-(2-ethylhexyl) phthalate DIDP = Diisodecyl phthalate; DnHP = Di-n-hexyl phthalate %w/w = Percentage by weight < = Less than

slide-8
SLIDE 8

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited. # Test is not covered under ACLASS (Certificate # AT‐1500) accredited listed scope. ACLASS is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

TEST REPORT

Company: Numo Manufacturing

Test Report #

11H-2708 Recipient: Chris Van Meter Date of Issue: November 15, 2011 Recipient Email: cvanmeter@numomfg.com Pages: Page 8 of 10 cc to Email:

  • Date Received:

November 10, 2011

ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 38-42 Kwai Fung Crescent, Kwai Chung N.T., Hong Kong Tel: 852-3185 8000 Fax: 852-3572 0374 ansecogroup.com

AT-1500

110804 CS-HK-F024

SPECI MEN DESCRI PTI ON:

Specimen No. Specimen Description Location 1 Black coating On zipper head (slider 8cf) 2 Black coating On zipper head (SL45-13YKK) 3 Black coating On zipper head (ZP50-13) 4 White coating On zipper head (ZIP 5 White) 5 Shiny black plastic Zipper teeth (8cf Blk zipper chain) 6 Shiny black plastic Zipper teeth (ZP50-13) 7 Transparent plastic Zipper teeth (ZIP 5 White) 8 Black fabric Zipper tape (8cf Blk zipper chain) 9 Shiny black fabric Zipper tape (ZC5-13) 10 Black fabric Zipper tape (ZP50-13) 11 White fabric Zipper tape (ZIP 5 White) 12 Deep golden metal Zipper teeth (ZC5-13) 13 Deep golden metal Zipper stop (ZC5-13) 14 Silvery metal Zipper puller (slider 8cf) 15 Silvery metal Zipper slider (slider 8cf) 16 Silvery metal Zipper puller (SL45-13YKK) 17 Silvery metal Zipper slider (SL45-13YKK) 18 Silvery metal Zipper puller (ZP50-13) 19 Silvery metal Zipper slider (ZP50-13) 20 Silvery metal Zipper stop (ZP50-13) 21 Silvery metal Zipper puller (ZIP 5 White) 22 Silvery metal Zipper slider (ZIP 5 White)

slide-9
SLIDE 9

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited. # Test is not covered under ACLASS (Certificate # AT‐1500) accredited listed scope. ACLASS is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

TEST REPORT

Company: Numo Manufacturing

Test Report #

11H-2708 Recipient: Chris Van Meter Date of Issue: November 15, 2011 Recipient Email: cvanmeter@numomfg.com Pages: Page 9 of 10 cc to Email:

  • Date Received:

November 10, 2011

ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 38-42 Kwai Fung Crescent, Kwai Chung N.T., Hong Kong Tel: 852-3185 8000 Fax: 852-3572 0374 ansecogroup.com

AT-1500

110804 CS-HK-F024

SPECI MEN DESCRI PTI ON:

Specimen No. Specimen Description Location 23 Silvery metal Zipper stop (ZIP 5 White) 24 Golden metal Puller (SLSH5) 25 Golden metal Slider (SLSH5) 26 Golden metal Puller (SLLG5) 27 Golden metal Slider (SLLG5)

slide-10
SLIDE 10

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited. # Test is not covered under ACLASS (Certificate # AT‐1500) accredited listed scope. ACLASS is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

TEST REPORT

Company: Numo Manufacturing

Test Report #

11H-2708 Recipient: Chris Van Meter Date of Issue: November 15, 2011 Recipient Email: cvanmeter@numomfg.com Pages: Page 10 of 10 cc to Email:

  • Date Received:

November 10, 2011

ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 38-42 Kwai Fung Crescent, Kwai Chung N.T., Hong Kong Tel: 852-3185 8000 Fax: 852-3572 0374 ansecogroup.com

AT-1500

110804 CS-HK-F024

SAMPLE PHOTO:

  • End Report-