SLIDE 8 Our advantages
Maximum efficiency of the Power Supply
High efficiency
Supply The efficiency
LED Efficiency More light Efficacy of the project Increased service lifespan The efficacy of the project LED Efficiency LED Efficiency Project cost Increasing service life Increased service lifespan Power consumed Time for luminaires selection
A comfortable light with minimal light loss Dust resistant plafond Selecting various light distribution curves
The power supply in our lights can be fjne-tuned to the optjmal required level, which allows for a 3-10% increase in effjciency. In standard “ofg-the-shelf” power suppliers, effjciency sharply decreases when deviatjng from the rated power value We use special light-difgusing polycarbonate for our lights, resultjng in a transmission effjciency of up to 92-93%. It results in a more comfortable and more effjcient light. Typical lights use materials that have a luminous fmux transmission effjciency of no more than 80-82%. We do not use open light-emittjng diodes, transparent plafonds or lenses in our products, which cause discomfort and eye irritatjon to the users The lightjng part of all our lights is made with maximum protectjon – IP6x, even if the allowed level of protectjon is lower. Lightjng fjxtures without dust ммprotected housing typically show up to a 10-20% degradatjon in luminous fmux afuer only a few years of regular use. The sealing materials that we use ensure that the optjcal part of our lights remains clean throughout the entjre period of operatjon By using external refmectors, we create optjmal light distributjon for every given design and project. Depending on the project, this can yield an increase in effjciency of up to 10-20%
The most efficient LEDs High-quality electronic components Fine-tuning of the power and luminous flux Aluminum radiator Aluminum printed circuit boards Lighting Control Automated system for computing/selecting optimal lights parameters
We create lights for each specifjc project and use the latest and most efgectjve LED models in our design, optjmizing by selectjng the most effjcient LED model for a given set of requirements. This allows us to design and produce a 5-10% more effjcient product, on average, than those of our competjtors We use only the highest quality components in our products (light-emittjng diodes, capacitors, printed circuit boards, etc.) from top manufacturers. This atuentjon to selectjon of our components, as well as our rigorous quality control measures, ensures that our products will have at least a 20% longer service life span than those of our competjtors When developing a project, we select the optjmal ratjo of lights, their effjciency, power consumptjon and price. As a result, our projects are 10-20% more afgordable, and 15-20% more effjcient than those of our competjtors In our industrial lights, we use aluminum heat sinks for heat dissipatjon, which allows for a 10-15% increase in effjciency, and extends the service life span up to 30-50% in comparison to a steel or polymer casing We use aluminum circuit boards instead of the traditjonally used textolite PCBs. This difgerence allows for an increase of the LED’s effjciency by 3-5%, and extends its service life span by 10-20% We offer various choices on lighting control systems, allowing our clients to save up to an additional 30% of the consumed power We have developed specialized sofuware with an embedded mathematjcal model that enables us to construct an optjmal luminaire based on your project requirements and specifjcatjons. Our partners and clients do not need to spend their valuable tjme searching for the right choices in catalogues anymore. Simply enter your parameters into our sofuware and our program will compute the optjmal luminaire in a matuer of seconds
I T W S Y S T E M S
+10% +10% +10% +20% +20% +20% +20% +15% +5%
+50% +20%
