SLIDE 1
DPM test Pla lan
Ba Babak Abi
17 Sep 2018
1
DPM tests plan
- Hardware, independent of firmware progress but if any art of
firmware would be ready could help here too.
- After final semi-review (and probably a small design re-spin) submitting to
manufacturing in UK. We are aiming for 6 board prototyping in 2 steps of 3+3 boards.
- DCs and mechanical checks
- Performance tests:
1. DDR4 2. TX/RX 10GbE and bit rate error 3. PCIe SSD
- What is the test platform,
- COBs Oxford and RAL and UCL has the current generation and SLAC has also
the new generation, capable of checking items 1 and 3 and partially 2.
- Carrier board, for access to all TX/RXs and should be able to do full tests.
- Two variation of carrier boards :
- 1. SLAC based, I will start to working on PCB after DPM submission.
- 2. Minimum board just provide the PS and all TX<->RX are looped in samtec cons.