IPv6 Ready Logo Aiding IPv6 Deployment Timothy Winters LACNIC 27 - PowerPoint PPT Presentation

IPv6 Ready Logo Aiding IPv6 Deployment Timothy Winters LACNIC 27 May 2017

IPv6 Forum’s IPv6 Ready Logo Goal 2001-Present: Conformance and Interoperability test program • intended to increase user confidence and promote IPv6 deployment. Logo CommiMee Structure • LaOf Ladid IPv6 Forum President Hiroshi Esaki @WIDE Erica Johnson @UNH IPv6 Ready Co-Chair IPv6 Ready Co-Chair Timothy Winters @UNH Technical Chair Asia Regional Officer NA Regional Officer Europe Regional Officer

IPv6 Ready Logo Programs • Extensive Interoperability and Conformance tesOng Requirements for IPv6 stacks. – All MUSTS and SHOULD tested within standard RFC • IPv6 Core • DHCPv6 • CE Router (RFC 7084 ) Requirements: 100% pass Conformance & Interoperability

Approved Labs

Logo Process APPLY TEST APPROVED Self-Test Online Regional Results applicaOon Officer submit both coordinates or 100% pass ApplicaOon Approved Conformance review and Lab Results and Interop Chair gives Results final approval.

TesOng Process • Products have a choice to self test or go to an IPv6 Ready Lab for tesOng. • Results must be a 100% Pass for Conformance and Interoperability • Interoperability TesOng requires tesOng against 4 interoperability partners. • Captures and Results files are kept to be submiMed for review when applying for the Logo.

Test SpecificaOon • Openly available to the public for comment. • Based on IETF standards tesOng the MUST and SHOULDs in the standard. • IPv6 Ready Technical CommiMee of volunteers from approved labs review any comments and implements changes to the test specificaOons. • Also discuss reviewing any test issues discovered by labs during the tesOng process.

ApplicaOon Process • Online ApplicaOon • ApplicaOon process includes: – Contact Info, Device Info, Test Results • Usage Agreement for use of IPv6 Ready Logo must be completed before examinaOon begins • Once the applicaOon is received it is distributed to the Regional lab for the examinaOon • ExaminaOon Report then routed to Chair for final approval

Product Logo Usage • If a series of products use idenOcal networking stacks, that product series will be accepted with an applicaOon. • If a new product version does not change the network stack, vendor can update the registered version by submidng an applicaOon (no test logs needed). • If a new product version changes the networking IPv6 stack it is required to retest and resubmit.

Orgs Leveraging the Logo • IPv6 Ready Logo Program currently has over 1000 test cases for tesOng IPv6 protocols (SLAAC, DHCP, IPSec, IKEv2 and CE Router). • Profiles and Test Programs have the ability to leverage exisOng test cases. – Example USGv6 Test Program uses IPv6 Ready Logo tests selecOng test cases that apply to USGv6 Test Profile. • Allows ImplementaOons to work towards several different programs at once.

1000 1200 1400 1600 200 400 600 800 0 Current Logo Approvals abr.-05 oct.-05 hMps://www.ipv6ready.org/db/index.php/public/ abr.-06 oct.-06 abr.-07 oct.-07 abr.-08 oct.-08 abr.-09 oct.-09 As of June 2016 abr.-10 oct.-10 abr.-11 oct.-11 abr.-12 oct.-12 abr.-13 oct.-13 abr.-14 oct.-14 abr.-15 1378 oct.-15 abr.-16 CE Router DHCPv6 Ipsec Core 10