CONTR ONTROLTE OLTEST ST LTD LTD ЕА “BAS” Reg. № 52 ОКА INSPEC SPECTION ON BODY TYPE “A” INSPECTION BODY BDS EN ISO/IEC 17020:2012 valid to 06.10.2018 NB 2413 - PED; TPED БДС EN ISO 9001:2008 ISO 14001:2004 OHSAS 18001:2007 ISO 55001:2014 12, Assen Jordanov blvd, Sofia 1592, Bulgaria; tel./fax 359/2/ 978 67 88; 978 81 14; e- mail ndt@controltest.eu / www.controltest.eu PRESENTATION Page 1 of 12 09 2017
CONTR ONTROLTE OLTEST ST LTD LTD ЕА “BAS” Reg. № 52 ОКА INSPEC SPECTION ON BODY TYPE “A” INSPECTION BODY BDS EN ISO/IEC 17020:2012 valid to 06.10.2018 NB 2413 - PED; TPED БДС EN ISO 9001:2008 ISO 14001:2004 OHSAS 18001:2007 ISO 55001:2014 12, Assen Jordanov blvd, Sofia 1592, Bulgaria; tel./fax 359/2/ 978 67 88; 978 81 14; e- mail ndt@controltest.eu / www.controltest.eu Company Profile About us “Controltest” Ltd was founded in 1995. It is well-known at the Bulgarian market and abroad with services rendered in the field of nondestructive, destructive testing and electrical measurements, life prediction of materials and structures, integrated quality systems consultants, technical Inspections and survey , as well as conformity assessment of transportable pressure equipment (ТPED) and pressure equipment (PED) The company central office is situated in the capital of Bulgaria – city of Sofia. There are nine more laboratories in Bulgaria, Macedonia and Croatia located as follows: • North of Bulgaria – City of Pleven (two labs), City of Ruse and City of Vratza • Central part of Bulgaria – City of Plovdiv (a temporary one) and City of Stara Zagora • East of Bulgaria – City of Burgas (“Controltest - Gama” Ltd. – a joint venture company, partnership with “Gama” Ltd ) • Macedonia – City of Skopje (a temporary one) • Croatia – City of Zagreb Accreditations, Licenses and Certificates: 1. Since its foundation the company is accredited by “Standardization and metrology committee” at the Council of Ministers according to BDS EN 45001 and BDS EN 45002. In 1999 the company is accredited by the “Bulgarian Accreditation Service” at the “Standardization and metrology committee” (certificate № 5 -12/12.03.1999). At the present moment “Controltest” Ltd is accredited by the Executive Agency “Bulgarian accreditation service” according BDS EN 17020/2012 as an Inspection Body type “A” (Certificate №52OKA) 2. Since March 1998 “Controltest” Ltd is the first Bulgarian company in this field with a certified Quality Management System according ISO 9002:1994 in the field of NDT ( approval certificate № 206717 ), Since March 2001 “Controltest” Ltd is certified according ISO 9001:2000(approval certificate № 206717 ) by Lloyds Register Quality Assurance and subsequently according ISO 9001:2008. 3. Si nce June 2014 “Controltest” Ltd is certified according : ISO 14001:2004 ( approval certificate № 72931) by NQA. OHSAS 18001:2007 ( approval certificate № 72932) by NQA 4. Since May 2001 “Controltest” Ltd is authorized body for Technical Survey of High Risk Equipment / reg. №228 / by the “Standardization and Metrologies State Agency” according PMS 187/21.09.2000 and licensed for the same activities since 30 Oct.2006. 5. Controltest Ltd is a Notified by European Commission Body number 2413 for Conformity Assessment of: Since October 2012 according to Directive 2010/35/EU Transportable Pressure Equipment (TPED). Since December 2014 according to Pressure Equipment Directive 97/23/EC (PED) and since August 2016 according to Pressure Equipment Directive 2014/68/ EU (PED ). 6. Since August 2015 “Controltest” Ltd is the first company certified according: ISO 55001:2014 . Page 2 of 12 09 2017
CONTR ONTROLTE OLTEST ST LTD LTD ЕА “BAS” Reg. № 52 ОКА INSPEC SPECTION ON BODY TYPE “A” INSPECTION BODY BDS EN ISO/IEC 17020:2012 valid to 06.10.2018 NB 2413 - PED; TPED БДС EN ISO 9001:2008 ISO 14001:2004 OHSAS 18001:2007 ISO 55001:2014 12, Assen Jordanov blvd, Sofia 1592, Bulgaria; tel./fax 359/2/ 978 67 88; 978 81 14; e- mail ndt@controltest.eu / www.controltest.eu Activities: Non Destructive Testing: Radiographic testing 1. 13. Thermal camera services 1.1. Conventional radiography 14. Eddy Current testing 1.2. Computed radiography 14.1. Size and location of surface and subsurface Ultrasonic testing 2. discontinuities Ultrasonic thickness measurements 3. 14.2. Thickness measurements of coatings over ferrous Dye Penetrant testing 4. and non-ferrous metal Magnetic-Particle testing 5. 14.3. Sorting of metal materials Magnetic method for testing of steel ropes 6. 15. Hardness test: Visual testing 7. 15.1. Vickers Leak testing 8. 15.2. Rockwell 8.1. Pneumatic testing / Bubble testing; Vacuum Box 15.3. Brinell testing 15.4. Shore 8.2. Pressure testing of welded joints 16. Dimensional measurements. 8.3. Pressure strength testing with and without Chemical analysis: 17. bursting 17.1. Atomic emission spectrometry of carbon and Continuity of coatings and insulation, insulation 9. stainless steel (i ncl. “C”, “P”, “S”) , aluminum disruptive voltage alloys. 10. Vibration measurements 17.2. X-Ray spectrometry of steel, aluminum and brass 11. Measuring of shafts concentricity alloys. 12. Acoustic Emission Destructive methods Metallography of welded joints and base metal: Mechanical properties: 2. 1. Microstructure 1.1. Tensile test 2.1. Macrostructure 1.2. Compression test 2.2. 1.3. Shear test 1.4. Bending test 1.5. Charpy impact test Electrical measurements up to 1000 V Loop impedance "phase-protective conductor" Insulation resistance 1. 4. Resistance of Earthing systems Safety switches / FI circuit breakers - contact voltage, 2. 5. Resistance of lightning protection systems grounding resistance, tripping time and tripping 3. current Technical survey of High risk equipment 1. Boilers – steam and water heating with power over 4. Pipelines for steam 6 bar<PS<80 bar and hot water 110°С<TS<450°С and 100<DxPS 116.3kW 2. Metal vessels for fluids in group 2 operating at: 5. Gas equipment and installations PS<16bar; TS<200°C and 100<V x P S<4000 6. Lifting systems and mobile platforms 3. Vessels for refrigerating systems Notified Body No.2413 as per Directive 2014/68/EU – Pressure Equipment Directive /РЕD/ 2. Approval of permanent joining procedures. 1. 2010/35/EU – Transportable Pressure Equipment Approval of permanent joining personnel. Directive /ТРЕD/”. Approval of non-destructive testing personnel according to Annex I, 3.1.3 Technical Inspections and Supervising control Dimensional and document control. Inspection of processes, packaging and shipment 1. 3. Witness of tests and trial assembly of equipment. preparation of final products. 2. Determining Residual Resource of materials and structures Integrated Quality Systems Consultants Page 3 of 12 09 2017
Recommend
More recommend
