SLIDE 1
Aggregate Advisory Board
Chapter 210/211 Changes
November 2, 2016
Tom Wolf, Governor Patrick McDonnell, Acting Secretary
Aggregate Advisory Board Chapter 210/211 Changes November 2, 2016 - - PowerPoint PPT Presentation
Aggregate Advisory Board Chapter 210/211 Changes November 2, 2016 - - PowerPoint PPT Presentation
Aggregate Advisory Board Chapter 210/211 Changes November 2, 2016 Tom Wolf, Governor Patrick McDonnell, Acting Secretary Chapter 210-Definitions Remove definitions for: Employee Possessor Explosives Materials Responsible
SLIDE 2
SLIDE 3
- 210.13 Eliminate background check and
put compliance in present tense
Chapter 210
SLIDE 4
- Add definition for At-the-hole
communication
- Add context to Cube Root Scaled distance
- Remove definitions for
— Employee Possessor — Explosives Materials — Responsible person
- Add definition for Explosives
Chapter 211-Definitions
SLIDE 5
- Remove (ii) from Flyrock definition about
beyond the property
- Add definition for FMCSA inspection
- Remove definition of nuisance
- Add definitions for MSHA and OSHA
- Add context for Square Root scaled distance
- Remove definitions for Unauthorized actions
Chapter 211-Definitions
SLIDE 6
- Remove proposed paragraph 4 about
employee possessors and responsible persons
211.103 Enforcement
SLIDE 7
- Add another federal rule citation
211.117 Daily Summary of Magazine Trans.
SLIDE 8
- (e) Change the context to present tense
- (f) Change “all subcontractors” to
“Blasting contractor”
211.121 General Requirements
SLIDE 9
- (a)(3) Change “Contract Blaster” to “Blasting
contractor”
- (a)(5) Change “independent contractors” to
“Blasting contractor”
- (a)(9) specify square root scaled distance,
except for demolition blasting which uses cube root scaled distance
- (a)(2) Eliminate notification requirement
211.124 Blasting Activity Permits
SLIDE 10
- (a)(9) Clarify the description of the
conditions of the area around the blast site
- (a)(19) Specify square root scaled
distance, except for demolition blasting which uses cube root scaled distance
- (a)(26) remove reference to the purpose
- f the drilled holes
211.133 Blast Reports
SLIDE 11
- Add the option for a Federal Vehicle
Inspection
211.141 Transportation
SLIDE 12
- Remove the proposed reference to
nuisance
- Delete additional “peaks” modifying
particle velocity (sections f and g)
211.151 Blasting Activities
SLIDE 13
- Remove the words “toxic” and “noxious”
211.152 Gases
SLIDE 14
- Revise the signage requirements to
comply with OSHA or MSHA regulations, as applicable
211.155 Preblast Measures
SLIDE 15
- Specify square root scaled distance
211.171 Monitoring
SLIDE 16
- Delete the reference to unauthorized
activities
211.201 Civil Penalties
SLIDE 17