SLIDE 1 (Draft) Daily Presentation Timetable for All Sessions
2 April, 2013
Room Jupiter 6
Sessions : Advance Chassis and Intelligent Control Technology Sub Topics : Vehicle Dynamics and Controls Room : Jupiter 6 Session Chair : TBC Session Co-Chair : TBC No Date/Time Paper No Titles 1 2-Apr, 2013 (11.00-11.20) 2013-01-0001 Dynamics and Simulation of RWD Vehicles Drifting at Steady State using BNP-MNC Tire Model Ronnapee Chaichaowarat, Witaya Wannasuphoprasit, Chulalongkorn University 2 2-Apr, 2013 (11.20-11.40) 2013-01-0124 Investigation of Inattentive Driving Estimation Method by Using Longitudinal and Lateral Driver Operational Models Shintaro Saigo, Pongsathorn Raksincharoensak, Masao Nagai, Tokyo Univ. of Agriculture & Technology 3 2-Apr, 2013 (11.40-12.00) 2013-01-0054 Development of a Driver's Intention Determining Algorithm for a Steering System Based Collision Avoidance System Taewook Hong, Jaejoon Kwon, Kihong Park, Kookmin University; Kyuhoon Lee, Taehun Hwang, Taeyoung Chung, Hyundai Mobis Company 4 2-Apr, 2013 (12.00-12.20) 2013-01-0056 Computation of Driving Pleasure based on Driver's Learning Process Simulation by Reinforcement Learning Tsuyoshi Sakuma, Toshiyuki Shimizu, Yonosuke Miki, Nissan Motor Company, Ltd.; Kenji Doya, Eiji Uchibe, Okinawa Institute of Sc. and Tech. Lunch Break (12.20-13.30) Sessions : Advance Chassis and Intelligent Control Technology Sub Topics : Vehicle Systems and Controls Room : Jupiter 6 Session Chair : TBC Session Co-Chair : TBC No Date/Time Paper No Titles 5 2-Apr, 2013 (13.30-13.50) 2013-01-0028 Development of Active Vibration Control System for Drive shafts Jeong-Hyeon Bak, Kwang-Hee Lee, Inha University; Jeong-Lyul Park, Seohan Industries; Chul-Hee Lee, Eun-Sang Lee, Inha University; Nam-Kyung Kim, Gyeongnam National University of Science 6 2-Apr, 2013 (13.50-14.10) 2013-01-0055 Development of a Fail-Safe Control Strategy for Electro-Mechanical Brake System Minwoo Sho, Kihong Park, Kookmin University; ManBok Park, Myoungjune Kim, Mando Corp. 7 2-Apr, 2013 (14.10-14.30) 2013-01-0075 CVT Auto Cruise Ratio Control Using Adaptive Sliding Mode Control Kihoon Han, Continental Automotive System; Youngsun Yoon, University of Minnesota 8 2-Apr, 2013 (14.30-14.50) 2013-01-0125 Development of Controller for Contactless Electronic Auxiliary Brake System Young Wook Son, Yong Eun Kim, You Jun Choi, Korea Automotive Technology Institute; Chang Hee Yoo, Sangsin Brake 9 2-Apr, 2013 (14.50-15.10)
SLIDE 2
2 April, 2013
Room Jupiter 6 (Cont.)
Sessions : Vehicle Design, Development, and Testing 4/7 Sessions : Advance Chassis and Intelligent Control Technology 1/3 Sub Topics : Intelligent Controls Room : Jupiter 6 Session Chair : TBC Session Co-Chair : TBC No Date/Time Paper No Titles 10 2-Apr, 2013 (15.30-15.50) 2013-01-0030 Building of an Unmanned Solar Vehicle Kangwon Lee 11 2-Apr, 2013 (15.50-16.10) 2013-01-0053 Global Tool for Objective Data Acquisition for Brake NVH Tests Marc Del Sol, Roger Mateu, IDIADA Automotive Technology 12 2-Apr, 2013 (16.10-16.30) 2013-01-0036 A Study of Layout Regarding Integrated Controls on the Steering Wheel Yong Lee, Jongyong Nam, Hyundai Motor Company; Eui-seung Jung, Youngjae Lim, Sung wook Jung, David Chung, Korea University 13 2-Apr, 2013 (16.30-16.50) 2013-01-0061 Automation in Display Testing - A Breakthrough Approach Narasimhan Rajagopal, Caterpillar India Private Limited
Room Jupiter 10
Sessions : Vehicle Design, Development, and Testing 1/7 Sub Topics : Vehicle Design and Handling Room : Jupiter 10 Session Chair : TBC Session Co-Chair : Dr.China Benyajati (MTEC) No Date/Time Paper No Titles 1 2-Apr, 2013 (11.00-11.20) 2013-01-0033 Functional Vehicle Design for Urban Mobility Ricardo Satué, Applus IDIADA 2 2-Apr, 2013 (11.20-11.40) 2013-01-0060 Estimation of Lateral Tyre Force from Objective Measurement Data for Handling Analysis Jungsik Kim, Hankook Tire Co., Ltd. R&D Center; Seongho Kim, Hankook Tire Co., Ltd. R&D Center 3 2-Apr, 2013 (11.40-12.00) 2013-01-0110 Model Based Design and Real-Time Simulation of the Electric Bike using RT-LAB and Simulink Youjun Choi, Yong Eun Kim, HeeSeok Moon, Young Wook Son, Korea Automotive Technology Institute 4 2-Apr, 2013 (12.00-12.20) 2013-01-0004 Development of Tire-Suspension-Steering Hardware in the Loop Simulator for Student Formula Car Handling Test Pongsakorn Boonchata; Nuksit Noomwongs, Sunhapos Chantranuwathana, Chulalongkorn University Lunch Break (12.20-13.30)
SLIDE 3
2 April, 2013
Room Jupiter 10 (Cont.)
Sessions : Vehicle Design, Development, and Testing 2/7 Sub Topics : Structural Analysis Room : Jupiter 10 Session Chair : TBC Session Co-Chair : Asst.Prof. Dr.Arisara Chaikittiratana (KMUTNB) No Date/Time Paper No Titles 5 2-Apr, 2013 (13.30-13.50) 2013-01-0059 Topology optimization of a low floor bus center frame Taehyung Lee, Il-Hoon Yoo, Byeong-Woo Kim, Gyoung Eun Kim, Jin Hur, University of Ulsan 6 2-Apr, 2013 (13.50-14.10) 2013-01-0032 Stress Analysis and Validation of Superstructure of 15-Meter Long Bus under Normal Operation Sittikorn Lapapong, Narong Pitaksapsin, Sedthawatt Sucharitpwatkul, Tanakorn Tantanawat, Rattanasuda Naewngerndee, Anek Phuchamnong, Nat'l Metal and Materials Tech. Center 7 2-Apr, 2013 (14.10-14.30) 2013-01-0093 Development of Hot-Stamping Tubular Bumper Frame on Vehicle Body Hyun Gyung Kim, Hyundai Motors; Dong Hak Kim, Hyundai Hysco; Seung Ha Lee, Hyundai Steel; Sang Cheon Park, Hyundai Motors 8 2-Apr, 2013 (14.30-14.50) 2013-01-0035 A Study on Development of Body Structure Using Hydroforming of a Thin- walled UHSS Tube Munsoo Cha, Cheol-Ung Kim, Hyundai Motor Company 9 2-Apr, 2013 (14.50-15.10) 2013-01-0126 An Evaluation of Crankshaft Bending Rigidity using Finite Element Analysis Sangmeshwar M. Kharabe, Manoj R. Ukhande, Rajesh S. Mane, CDFD Engg. Bharat Forge Ltd.; Prashant P. Date, Mechanical Engg. Dept. IIT; Prakash P. Apte, Electrical Engg. Dept. IIT Break (15.10-15.30) Sessions : Vehicle Design, Development, and Testing 3/7 Sub Topics : Parts and Components Development Room : Jupiter 10 Session Chair : TBC Session Co-Chair : Dr.Sittikorn Lapapong (MTEC) No Date/Time Paper No Titles 10 2-Apr, 2013 (15.30-15.50) 2013-01-0076 A Method for Reliability Improvement of Torsion Spring for Exhaust Valve Baek Ju Sung, Korea Institute of Machinery & Materials 11 2-Apr, 2013 (15.50-16.10) 2013-01-0019 Structural Analysis of Steering System Components Considering the Anisotropic Material Properties of Carbon Fiber Reinforced Plastic Sun Kyoung Jeoung, Youn Ki Ko, Woo Kang, Korea Automotive Technology Institute; Dong-hun Ha, Seong Soo Kim, Mando Corp 12 2-Apr, 2013 (16.10-16.30) 2013-01-0018 Development of the Overmolding Instrument Panel Kong Byungseok, Hyundai Motor Co. 13 2-Apr, 2013 (16.30-16.50) 2013-01-0094 Seat Ingress and Egress Durability Test Pre-Validation Methods Derived Using Flat Friction Test JunHo Song, DYMOS Co.
SLIDE 4
2 April, 2013
Room Jupiter 11
Sessions : Noise Vibration Harshness and comfort Sub Topics : - Room : Jupiter 11 Session Chair : TBC Session Co-Chair : TBC No Date/Time Paper No Titles 1 2-Apr, 2013 (11.00-11.20) 2013-01-0100 The Comprehensive Study for Abatement of Structure-Borne Rattle Noise in Motorcycle Prashant Bhavsar, R. Govindarajan, Gyanendra Roy, V. Yogaraja, Mahindra 2 Wheelers Limited 2 2-Apr, 2013 (11.20-11.40) 2013-01-0101 A Study for Improving the Acoustic Performance of Dash Isolation Pad using Hollow Fiber Jung Wook Lee, Hyundai Motor Company; Wonku Lee, Su Nam Lee, NVH Korea Inc.; Sang Woo Park, Woongjin Chemical Company 3 2-Apr, 2013 (11.40-12.00) 2013-01-0116 Evaluation of Sound Radiation from Exhaust Muffler Shell-A Novel Experimental Approach Deepak Rana, Jasmeet Singh Suri, Ajay Aggarwal, Maruti Suzuki India, Ltd. 4 2-Apr, 2013 (12.00-12.20) 2013-01-0133 Influence of the Inverter Calibration on the NVH of an Electrified LDT Javier Iturbe, Ismael Fernandez, Marco Mammetti, Applus Idiada Lunch Break (12.20-13.30) Sessions : Fuel Cell, Hybrid, and EV 1/3 Sub Topics : - Room : Jupiter 11 Session Chair : TBC Session Co-Chair : Dr. Angkee Sripakagorn (Chula) No Date/Time Paper No Titles 5 2-Apr, 2013 (13.30-13.50) 2013-01-0006 Korean Safety Certification Test for 50kW DC Electric Vehicle Fast Charge Sub Han, LS Cable & System 6 2-Apr, 2013 (13.50-14.10) 2013-01-0039 Thermal Behavior Analysis of Polymer Composites in Lithium-Ion Battery Cell Yeo-Seong Yoon, Mee-Hye Oh, Ahyeong Kim, Ki-Hoon Kim, Namil Kim, Korea Automotive Technology Institute 7 2-Apr, 2013 (14.10-14.30) 2013-01-0098 Effect of Ambient Conditions on the Performance of an Open-cathode PEM Fuel Cell Stack Hend Aizeyoudi, Agus Sasmito, Tariq Shamim, Masdar Institute of Science & Technology 8 2-Apr, 2013 (14.30-14.50) 2013-01-0127 Development of DC Motor Driven 3 Way Valve for FCEV Sung Wook Na, Hun Woo Park, Chi Myung Kim, Yong Sun Park, Hyundai Motor Co. 9 2-Apr, 2013 (14.50-15.10) 2013-01-0128 Challenges and Opportunities in the Variant Calibration of Hybrid Vehicles Gerhard Kokalj, AVL LIST GmbH; Ruangrit Ekachaiworasin, AVL Sea & Australia Co. Ltd. Break (15.10-15.30)
SLIDE 5 2 April, 2013
Room Jupiter 11 (Cont.)
Sessions : Fuel Cell, Hybrid, and EV 2/3 Sub Topics : - Room : Jupiter 11 Session Chair : TBC Session Co-Chair : Dr. Angkee Sripakagorn (Chula) No Date/Time Paper No Titles 10 2-Apr, 2013 (15.30-15.50) 2013-01-0038 A New Current Sensing Scheme for PMSM Drive Inverters in Automotive Applications Mooyoung Lee, Yunki Kwon, Geun-ho Lee, Doowon Technical University College 11 2-Apr, 2013 (15.50-16.10) 2013-01-0063 Towards Real-time Identification of Electric Vehicle Mass Erik Wilhelm, S'pore University of Technology & Design; Lennon Rodgers,
- Mass. Institute of Technology; Raffaele Gianantonio Bornatico, ETH-Zurich;
Gim Song Soh, S'pore University of Technology & Design 12 2-Apr, 2013 (16.10-16.30) 2013-01-0062 Development and Integration of a Regenerative Braking System Into a Full Electric Commercial Vehicle Sandro Boltshauser, Thomas Hibon, Roger Mateu, IDIADA Automotive Technology SA 13 2-Apr, 2013 (16.30-16.50) 2013-01-0130 A Method to Miniaturize the DC Link Capacitor of ISG Inverter Sang Min Kim, Deok-Kwan Choi, Taesuk Kwon, Hyundai Mobis
Room Jupiter 12
Sessions : Powertrain Technology 1/5 Sub Topics : Optimization and Engine Control Room : Jupiter 12 Session Chair : Mr. Per Christensen Session Co-Chair : Dr. Manida Tongroon (MTEC) No Date/Time Paper No Titles 1 2-Apr, 2013 (11.00-11.20) 2013-01-0103 Effects of Mechanical Turbo Compounding on a Turbocharged Diesel Engine Aaron Edward Teo Sheng Jye, Universiti Teknologi Malaysia; Apostolos Pesiridis, Brunel University; Srithar Rajoo, Universiti Teknologi Malaysia 2 2-Apr, 2013 (11.20-11.40) 2013-01-0120 Variable Geometry Turbocharger Active Control Strategies for Enhanced Energy Recovery Apostolos Pesiridis, Brunel University; Srithar Rajoo, Universiti Teknologi Malaysia 3 2-Apr, 2013 (11.40-12.00) 2013-01-0102 Air-fuel Ratio Transient Control Design for Gasoline Engines based on Individual Cylinder Air-Charge Estimation Yanan Zhao, Yanshan Univ.; Tielong Shen, Sophia Univ.; Xiaohong Jiao, Yanshan Univ. 4 2-Apr, 2013 (12.00-12.20) 2013-01-0011 MEMS sensor for Particulate Matter Measurement of Exhaust Gas Sera Lim, Sundong Kwon, Hyundai Motor Co.; Kukjin Chun, Seoul National Univ.; Seungbeom Yoo, Jin-ha Lee, Hyundai Motor Co. Lunch Break (12.20-13.30)
SLIDE 6
2 April, 2013
Room Jupiter 12 (Cont.)
Sessions : Powertrain Technology 2/5 Sub Topics : Emission Reduction 1/2 Room : Jupiter 12 Session Chair : Dr. Le Anh Tuan (HUST) Session Co-Chair : Dr. Preechar Karin (KMITL) No Date/Time Paper No Titles 5 2-Apr, 2013 (13.30-13.50) 2013-01-0012 A New After-treatment Concept of Diesel Exhaust Gas Using Barrier Discharge Reactor Combined with Diesel Particulate Filter Quang Vinh Tran, Hanoi Univ. of Science and Technology; Masataka Arai, Gunma Univ. Japan 6 2-Apr, 2013 (13.50-14.10) 2013-01-0048 Using Bypass to Simulate the Deterioration of Catalyst in a Motorcycle Engine Chang Tai Wu, Amadou Yameogo, Jau-Huai Lu, National Chung Hsing University 7 2-Apr, 2013 (14.10-14.30) 2013-01-0051 Fuel Economy of SI Vehicle Fueled by Ethanol/Gasoline Blends - Role of Engine Lubricant Viscosity Devendra Singh, CSIR-Indian Institute Of Petroleum; Mritunjay Shukla, CSIR- Indian Institute of petroleum; Sathpal Singh, CSIR-IIP; Yograaj Singh Sr, CSIR- Indian Institute of Petroleum; Nishan Singh, CSIR-Indian Institute of petroleum 8 2-Apr, 2013 (14.30-14.50) 2013-01-0052 An Experimental Investigation On Low Temperature CDPF Regeneration Utilizing Hydrogen Zhijin Liu, ALANTUM Corporation; Kwangmin Chun, Soonho Song, Yonsei Univ. 9 2-Apr, 2013 (14.50-15.10) 2013-01-0068 The Evaluation Study on the Hazardous Pollutants Contribution Rate from Passenger Cars using Gasoline and LPG Fuel Yunsung Lim, National Institute Environmental Res.; Hyung Jun Kim, NIER Break (15.10-15.30) Sessions : Powertrain Technology 3/6 Sub Topics : Emission Reduction 2/2 Room : Jupiter 12 Session Chair : Dr. Hironori Saitoh (Sojo Univ) Session Co-Chair : Dr.Amornrat Kaewpradap (KMUTT) No Date/Time Paper No Titles 10 2-Apr, 2013 (15.30-15.50) 2013-01-0138 Review of Soot Emission Measurements From Vehicles From Filter Mass to Particle Number Barouch Giechaskiel, Erich Schiefer, AVL List GmbH; Wolfgang Schindler, AVL North America Inc.; Harald Axmann, AVL DiTest GmbH; Christos Dardiotis, European Commission, JRC 11 2-Apr, 2013 (15.50-16.10) 2013-01-0009 Microfluidic Simulation of Diesel Exhaust Gas and Soot Oxidation in Diesel Particulate Filter Kazuhiro Yamamoto, Nagoya University; Yasunari Hanaki, Nissan Motor Co., Ltd. 12 2-Apr, 2013 (16.10-16.30) 2013-01-0090 The Regeneration of Diesel Particulates Filter with Hydrogen Jau-Huai Lu, Yi-Sung Chen, National Chung-Hsing Univ. 13 2-Apr, 2013 (16.30-16.50) 2013-01-0089 Study On the Exhaust Emission Characteristics In the Diesel Engine with the Urea-SCR System According Various Urea Contents Rate Hyung Jun Kim, Yunsung Lim, Myoung Do Eom, National Institute Environmental Res.
SLIDE 7
3 April, 2013
Room Jupiter 6
Sessions : ITs and Automotive Infotronics Sub Topics : - Room : Jupiter 6 Session Chair : Asst. Prof. Hironori SUZUKI (NIT) Session Co-Chair : Raksit THITIPATANAPONG (NECTEC) No Date/Time Paper No Titles 14 3-Apr, 2013 (11.00-11.20) 2013-01-0022 Vehicle Platoon Control to Alleviate Propagation of Car-Following Shockwave Hironori Suzuki, Nippon Institute of Technology; Tsuyoshi Katayama, Japan Automobile Research Institute 15 3-Apr, 2013 (11.20-11.40) 2013-01-0064 The Development of the ACC System Performance Evaluation using VRS Heesung Shin, Youngwook Son, Sungjin Kim, Korea Automotive Technology Institute 16 3-Apr, 2013 (11.40-12.00) 2013-01-0084 Support Effects of the Haptic Throttle Grip by the Friction Circle on the Driving Wheel Manabu Fujito, Kouji Sakai, Yasunobu Harazono, YAMAHA MOTOR CO., LTD. 17 3-Apr, 2013 (12.00-12.20) 2013-01-0085 Application of Background Light Elimination Technique for Lane Marker Detection Kraisorn Throngnumchai, Hidekazu Nishiuchi, Yousuke Matsuno, Hiroshi Satoh, Nissan Motor Co., Ltd. Lunch Break (12.20-13.30) Sessions : Vehicle ManufacturingTechnology Sub Topics : - Room : Jupiter 6 Session Chair : Dr. Surangsee Dejcharern Session Co-Chair : Dr. Julaluk Carmai No Date/Time Paper No Titles 18 3-Apr, 2013 (13.30-13.50) 2013-01-0131 Evaluation of electromagnetic forming behavior of automotive aluminum alloy sheet Daeyong Kim, Ji Hoon Kim, Korea Institute of Materials Science; Myoung-Gyu Lee, POSTECH 19 3-Apr, 2013 (13.50-14.10) 2013-01-0044 Numerical prediction and experimental verification on the fracture of Mg alloy sheet during deep drawing process for fabrication of automotive compressor case Sang-Woo Kim, Young-Seon Lee, Korea Institute of Materials Science 20 3-Apr, 2013 (14.10-14.30) 2013-01-0115 Controller Model Integration for Virtual Product development Siddartha Saikia, Sreenivasulu Ozili, Karpagam Chinnaiah Paranjothi, Tharrini Rajendran, Caterpillar India Private Limited 21 3-Apr, 2013 (14.30-14.50) 2013-01-0065 In Process Kanban Optimization for Manufacturing Simulation Amit Pingle, Shirish Shankar Sabnis, Gunjan Pandey, John Deere India Pvt, Ltd. 22 3-Apr, 2013 (14.50-15.10) 2013-01-0007 EMI shielding effectiveness of PP/conductive fiber composites for automotive interior Sun Kyoung Jeoung, Pyoung-Chan Lee, Seung-Eul Yoo, Myung Sik Lee, Korea Automotive Technology Institute; Sungbok Kwak, Jaeyoung Lee, Duckyang Ind. Co., Ltd; Hyung Tak Lee, Hakyu Seo, GS Caltex; Yoo-Yong Kim, MT Korea; Byeong-Woo Kim, University of Ulsan 23 3-Apr, 2013 (15.10-15.30) 2013-01-0132 Design for recycle of used up metal cutting tools Surendra Datar, Tata Motors, Ltd.
SLIDE 8
3 April, 2013
Room Jupiter 7
Sessions : Vehicle Safety Technology (1/2) Sub Topics : Crashworthiness and passive safety Room : Jupiter 7 Session Chair : TBC Session Co-Chair : Dr. Nuksit Noomwongs No Date/Time Paper No Titles 14 3-Apr, 2013 (11.00-11.20) 2013-01-0121 Legal Versus Consumer Requirements For Secondary Safety of Passenger Vehicles in Europe and the U.S. Joaquim Huguet, Applus+ IDIADA; Carlos Garcia Gutierrez, Applus+ IDIADA China; Eduardo Del Pozo, Applus Idiada 15 3-Apr, 2013 (11.20-11.40) 2013-01-0123 Robust Design in Occupant Safety Simulation Claudius Brix, P+Z Engineering; Chye Hock Tok, ARRK Corporation 16 3-Apr, 2013 (11.40-12.00) 2013-01-0015 A Study on the Characteristics of Occupant Injury Severity at Different Positions of Seat Adjustments Jinkyoo Kim, DYMOS Inc. 17 3-Apr, 2013 (12.00-12.20) 2013-01-0027 Development of Automobile Bumper Beam Using Hybrid Process Joung Myung Lim, Hanwha L&C; Sang Joon Lee, Hanwha L&C; Jun Gue Park, HYUNDAI Lunch Break (12.20-13.30) Sessions : Vehicle Safety Technology (2/2) Sub Topics : Driver, Accident and active safety Room : Jupiter 7 Session Chair : TBC Session Co-Chair : Dr. Nuksit Noomwongs No Date/Time Paper No Titles 18 3-Apr, 2013 (13.30-13.50) 2013-01-0074 On Scaling Virtual Human Models Ludek Hyncik, Hana Cechova, University of West Bohemia; Ludek Kovar, MECAS ESI s.r.o.; Pavel Blaha, University of West Bohemia 19 3-Apr, 2013 (13.50-14.10) 2013-01-0014 Characteristics of Accidents and Violations Caused by Elderly Drivers in Japan Kazumoto Morita, Michiaki Sekine, National Traffic Safety & Enviro Lab. 20 3-Apr, 2013 (14.10-14.30) 2013-01-0072 Drivers’ Behavior Analysis at Unsignalized Intersections Without Right of Way Kei Sato, Masao Nagai, Tokyo Univ. of Agric & Tech. 21 3-Apr, 2013 (14.30-14.50) 2013-01-0091 Hazard-Anticipative Driving Mechanism at Overtaking Pedestrians in Narrow Roads Hajime Tsuyuki, Ryuzo Hayashi, Masao Nagai, Tokyo Univ. of Agric & Tech. 22 3-Apr, 2013 (14.50-15.10) 2013-01-0106 A Study of Rear Side Vehicle Recognition on Curved Road by using Rear Side View Vision System Seunghwan Baek, Heungseob Kim, Inje University; WooSeong Che, Kyungsung University; Duksun Yun, KATECH; Kwangsuck Boo, Inje University 23 3-Apr, 2013 (15.10-15.30) 2013-01-0073 Design of Tactile Warning on Steering Wheel Using the Surface Myoelectricity Response Hidehisa Yoshida, National Defense Academy
SLIDE 9 3 April, 2013
Room Jupiter 10
Sessions : Vehicle Design, Development, and Testing 5/7 Sub Topics : Quality and Reliability 1 Room : Jupiter 10 Session Chair : TBC Session Co-Chair : TBC No Date/Time Paper No Titles 14 3-Apr, 2013 (11.00-11.20) 2013-01-0111 Steering Damper for Street Motorcycle Nobuo Hara, Yamaha Motor Co., Ltd.; Pisithsak Surawichai, Yamaha Motor Asian Center Co., Ltd. 15 3-Apr, 2013 (11.20-11.40) 2013-01-0108 Development of the Quantitative Assessment Methods and Indices with HILS for Evaluating Performance of the EMB/CBS Jaejoon Kwon, Taewook Hong, Kihong Park, Kookmin University; ManBok Park, Myoungjune Kim, Mando Corp 16 3-Apr, 2013 (11.40-12.00) 2013-01-0034 Optimization of Power Consumed by Scooter Engine Cooling Fan Karthikeyan N, Anish Gokhale, Ajay Shinde, Mahindra 2 Wheelers Limited 17 3-Apr, 2013 (12.00-12.20) 2013-01-0079 A Study on the Quality Assurance for Stable Performance of PAB Hyun Kim, Hyundai & Kia Corp. Lunch Break (12.20-13.30) Sessions : Vehicle Design, Development, and Testing 6/7 Sub Topics : Quality and Reliability 2 Room : Jupiter 10 Session Chair : TBC Session Co-Chair : TBC No Date/Time Paper No Titles 18 3-Apr, 2013 (13.30-13.50) 2013-01-0080 A Methodology for Evaluating the Accuracy of an Accelerometer Response in Impact Testing Using Implicit Analysis Gauri Ranadive, Anindya Deb, Bisheshwar Haorongbam, Indian Institute of Science, Bangalore 19 3-Apr, 2013 (13.50-14.10) 2013-01-0081 Dynamic Response Determination of Electronic Printed Circuit Board (PCB) Rahul Jagdale, Prashant Bardia, John Deere India Pvt, Ltd.; Mark Schmaltz, John Deere Electronic Solutions 20 3-Apr, 2013 (14.10-14.30) 2013-01-0002 A Study Regarding Comparisons of Driver Performance According to Integrated Display Locations (X, Y, Z Axis) Jeong Il Yu, Youngjae Lim, David Chung, Korea University 21 3-Apr, 2013 (14.30-14.50) 2013-01-0020 Study on Optimal TGS Lever Envelopes based on Human Characteristics Jongyong Nam, Yong Lee, Hyundai Motor Company R&D Center; Youngjae Lim, Korea University 22 3-Apr, 2013 (14.50-15.10)
3-Apr, 2013 (15.10-15.30)
SLIDE 10
3 April, 2013
Room Jupiter 11
Sessions : Vehicle Design, Development, and Testing 5/7 Sub Topics : Fluid Dynamics Room : Jupiter 11 Session Chair : TBC Session Co-Chair : Dr.Arpiruk Hokpunna (KMUTT) No Date/Time Paper No Titles 14 3-Apr, 2013 (11.00-11.20) 2013-01-0037 Aerodynamic Analysis of Cabriolet Passenger Car: A Design Approach Felix Regin A., Manoraj Manimanoharan, Maruti Suzuki India Limited; Akepati Bhaskar Reddy, Prakash Nigam, Thapar University 15 3-Apr, 2013 (11.20-11.40) 2013-01-0005 Liquid Cooled Induction Motor: Computational Design, Heat Transfer Analysis, Parametric Study, And Performance Testing Jenwit Soparat, Chi-na Benyajati, National Metal and Materials Tech. Center 16 3-Apr, 2013 (11.40-12.00) 2013-01-0096 Transient Wind Noise Simon Watkins, Mark Andrew Thompson, Firoz Alam, RMIT University 17 3-Apr, 2013 (12.00-12.20) 2013-01-0095 Aerodynamic Drag Reduction of Ahmed Model using Synthetic Jet Array Hoonil Park, Jun-Ho Cho, Seoul National University; Joonho Lee, Hyundai-Kia Motors; Dong-Ho Lee, Kyu-Hong Kim, Seoul National University Lunch Break (12.20-13.30) Sessions : Fuel Cell, Hybrid, and EV 3/3 Sessions : Powertrain Technology 6/6 Sub Topics : Driving Conditions Room : Jupiter 11 Session Chair : Dr. Angkee Sripakagorn (Chula) Session Co-Chair : Dr. Apiwat Suyabodha (Rangsit U) No Date/Time Paper No Titles 18 3-Apr, 2013 (13.30-13.50) 2013-01-0040 Effect of Air-conditioning on Driving Range of Electric Vehicle for Various Driving Modes Jong Tae Lee, National Institute Environmental Res.; Seokjoo Kwon, Hanyang University; Yunsung Lim, National Institute Environmental Res.; Mun Soo Chon, Chungju National Univ.; Daesik Kim, Gangneung-Wonju National Univ. 19 3-Apr, 2013 (13.50-14.10) 2013-01-0113 Dynamic Modeling of Electric Tuktuk for Predicting Energy Consumption in Bangkok Chayada Chaiyamanon, Angkee Sripakagorn, Nuksit Noomwongs, Chulalongkorn University 20 3-Apr, 2013 (14.10-14.30) 2013-01-0129 Field Operation Test on Electric Vehicle Energy Consumption in Mountainous and Cold District Taketo Nozawa, Tetsushi Mimuro, Hiroyuki Takanashi, Akita Prefectural University 21 3-Apr, 2013 (14.30-14.50) 2013-01-0069 A Comparison Study on Saving Fuel by Idle Stop System in Bangkok Traffic Condition Sarapon Thitipatanapong, Nuksit Noomwongs, Chulalongkorn University; Raksit Thitipatanapong, Nat. Electronic & Computer Tech. Center; Sunhapos Chantranuwathana, Chulalongkorn University 22 3-Apr, 2013 (14.50-15.10) 2013-01-0119 Exhaust Emissions from a Heavy-Duty Vehicle in a Real Traffic in the City of Poznan Jerzy Merkisz, Miloslaw Kozak, Piotr Lijewski, Poznan Univ. of Technology; Pawel Fuc, Poznan Univ of Technology 23 3-Apr, 2013 (15.10-15.30) 2013-01-0135 Investigation of Motorcycle Emission Tested by European Standard Driving Cycle and Bangkok Driving Cycle Amornrat Kaewpradap, Pithayodom Kanbua, Pradid Cheawchantanakid, Apichat Nonchana, Yossapong Laoonual, King Mongkut's Univ of Tech Thonburi
SLIDE 11
3 April, 2013
Room Jupiter 12
Sessions : Powertrain Technology 4/6 Sub Topics : Advanced Fuel Delivery Room : Jupiter 12 Session Chair : Dr. Srithar Rajoo (UTM, Malaysia) Session Co-Chair : Dr. Chinda Charoenphonphanich (KMITL) No Date/Time Paper No Titles 14 3-Apr, 2013 (11.00-11.20) 2013-01-0010 Effects of Single and Double Post Injections on Diesel PCCI Combustion Youngsoo Park, Choongsik Bae, KAIST 15 3-Apr, 2013 (11.20-11.40) 2013-01-0045 An Experimental Study on the Effects of High-Pressure and Multiple Injection Strategies on DI Diesel Engine Emissions Seung Yeon Yang, Suk Ho Chung, King Abdullah University (KAUST) 16 3-Apr, 2013 (11.40-12.00) 2013-01-0136 A Numerical Investigation of Mixing and Combustion Characteristics of A Direct-Injection (DI) Engine With Gasoline and Liquefied Petroleum Gas Jae Seong Lee, Juhyeong Seo, Ho Young Kim, Simsoo Park, Korea University 17 3-Apr, 2013 (12.00-12.20) 2013-01-0118 To Study on Ignition Characteristics of Syngas Mixtures by Shock Tube Luong Dinh Thi, Xi'an Jiaotong University; Vu Nguyen Hoang, Le Quy Don Technical University; ZuoHua Huang, Xi'an Jiaotong University Lunch Break (12.20-13.30) Sessions : Powertrain Technology 5/6 Sub Topics : Fuel Efficiency Room : Jupiter 12 Session Chair : Dr. Barouch Giechaskiel (AVL) Session Co-Chair : Dr. Nuwong Chollacoop (MTEC) No Date/Time Paper No Titles 18 3-Apr, 2013 (13.30-13.50) 2013-01-0070 Bio-Hydrogenated Diesel (BHD): A Promising Fuel for Advance Diesel Technology Somnuek Jaroonjitsathian, Chonchada Tipdecho, Padol Sukajit, PTT Public Company Limited; Natthaphong Namthirach, Sakkapong Suppatvech, Toyota Motor Asia Pacific - EM 19 3-Apr, 2013 (13.50-14.10) 2013-01-0105 Spray Characteristics of DME-LPG Blended Fuel in A High-Pressure Diesel Injection System Donggon Lee, Hanyang University; Hyun Gu Roh, Induk University; Seung Hwan Bang, Chang Sik Lee, Hangyang University 20 3-Apr, 2013 (14.10-14.30) 2013-01-0049 Operating Characteristics of DME-Gasoline Dual-Fuel in a Compression Ignition Engine at the Low Load Operation Kihyun Kim, Choongsik Bae, Korea Advanced Inst. of Science & Tech. 21 3-Apr, 2013 (14.30-14.50) 2013-01-0025 Effect of Surrounding Gas Oxygen Content on the Spray Mixture Formation and Auto-Ignition Phenomenon for Ethanol-Diethyl Ether Blended Fuels Hironori Saitoh, Kouji Uchida, Sojo University 22 3-Apr, 2013 (14.50-15.10) 2013-01-0026 Combustion and Emission Characteristics of Heavy Duty CNG Engine Fuelled with Synthetic Natural Gas (SNG) Gihun Lim, University of Science & Technology; Sungwon Lee, Cheolwoong Park, Changgi Kim, Young Choi, Korea Institute of Machinery & Materials 23 3-Apr, 2013 (15.10-15.30) 2013-01-0104 Improving Performance and Reducing Pollution Emissions of a Carburetor Gasoline Engine by Adding HHO Gas in to the Intake Manifold Tuan Le Anh, Hanoi Univ Of Science and Technology; Khanh Nguyen Duc, Huong Tran Thi Thu, Hanoi Univ of Science and Technology; Tai Cao Van, Nha Trang Vocational Trainning College
